Claim Missing Document
Check
Articles

Found 22 Documents
Search

Effect of Human Resources, Leadership Style, The Use of Information Technology and Internal Control on the Quality of Financial Statements Trisdina Mardinan; Muhammad Dahlan; Furry Khristianty Fitriyah
Journal of Accounting Auditing and Business Vol 1, No 1 (2018): January Edition
Publisher : Universitas Padjadjaran

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (273.42 KB) | DOI: 10.24198/jaab.v1i1.18795

Abstract

This study aims to examine Whether there is a significant influence of variable humanresources competency, leadership, utilization of information technology, internal control of thequality of financial statements either partially or simultaneously. The population in this researchis all work units (SATKER) within the Directorate General of Construction Materials for 15 unitsof work with 45 respondents consisting of a financial assistance of the work unit, the Accountingofficer of Accrual Based Institution (SAIBA) and State-Owned Officer (BMN). The primary usedthe data Obtained from respondents through questionnaires, for testing the data tested the validity,reliability test and hypothesis testing. The Data then in the analysis with the analysis method usedis multiple linear regression. The results Showed that the competence of human resources,leadership style, technology utilization, and internal control Affect the quality of financialstatements either partially or simultaneously
Rancangan alat potong tebu semi otomatis yang ergonomis Dirgahayu Lantara; Nurhayati Rauf; Muhammad Dahlan; A. Pawennari
Jurnal Energi Dan Manufaktur Vol 10 No 1 (2017): April 2017
Publisher : Department of Mechanical Engineering, University of Udayana

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (293.932 KB)

Abstract

Abstrak Penebangan tebu yang dilakukan pada lokasi perkebunan tebu PT. Perkebunan Nusantara XIV (Persero), yang dilakukan oleh petani pemotong tebu yang berada disekitar lokasi perkebunan pabrik, dengan menggunakan alat tradisional (Parang). Sedangkan tenaga kerja yang didatangkan dari luar Sulawesi – Selatan dengan menggunakan sabit. Alat potong tebu Semiautomatis Yang Ergonomis, dirancang berdasarkan Ukuran tubuh (badan) Petani pemotong tebu, tinggi batang tebu, diameter batang tebu, kondisi lahan dan cara kerja petani pemotong tebu pada saat melakukan aktivitas penebangan. Sehingga Alat Potong Tebu Semi Otomatis yang Ergonomis ini diharapkan memberikan hasil tebang yang lebih baik dari alat potong yang digunakan saat ini. Disamping itu energi yang digunakan pada saat melakukan aktivitas penebangan lebih kecil, agar petani pemotong tebu dapat tahan lebih lama untuk bekerja. Percobaan Alat Potong Tebu Semi automatis yang ergonomis ini dilaksanakan pada lokasi perkebunan Pabrik Gula Bone. Kata kunci: Petani, Tebu, Ergonomi, Rekayasa Teknik Abstract Cane harvesting that conducted on cane plantations site at PT. Perkebunan Nusantara XIV (Persero), by cane farmers in around the plant’s plantation site by using traditional tools (machetes). While labor brought in from outside South Sulawesi by using a sickle. Egronomic cane harvester semi-automatic, designed based on the farmer’s body size, stalk height of cane, diameter of cane, soil conditions and the procedure of farmer’s cane cutters at the time of harvesting activities. So that the egronomic cane harvester semi-automatic is expected to give better harvest results of harvester used today. In addition, the energy used at the time of harvesting is smaller, so that care farmers able to work in a long time. The testing of egronomic cane harvester semi-automatic was conducted on the sugar mills plantations of Bone. Keywords: Farmers, Sugarcane, Ergonomics, Engineering design
USULAN PERBAIKAN LINGKUNGAN KERJA PADA BAGIAN MESIN PUFFING GUN DI IKM BIPANG PUTRI SEHATI KABUPATEN GOWA Ahmad Padhil; Andi Pawennari; Muhammad Dahlan; Nur Rezky Awaliah
Journal of Industrial Engineering Management Vol 3, No 1 (2018): Journal of Industrial Engineering Management Vol. 3 No. 1
Publisher : Center for Study and Journal Management FTI UMI

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (569.686 KB) | DOI: 10.33536/jiem.v3i1.197

Abstract

Pada ruang produksi bagian mesin puffing gun atau disebut mesin palappo oleh masyarakat Kabupaten Gowa, pekerja sering mengeluhkan temperatur yang tinggi. Ruang produksi tersebut juga tidak memiliki ventilasi sehingga sirkulasi udara sangat kurang yang mengakibatkan ruangan panas dan tidak sejuk yang dapat mempengaruhi kondisi pekerja. maka yang menjadi rumusan masalah adalah penerapan ergonomi yaitu lingkungan kerja Industri Kecil Menengah (IKM) Bipang Putri Sehati pada bagian mesin puffing gun belum ergonomis sehingga diperlukan identifikasi terhadap penerapan lingkungan kerja yang ergonomis ditinjau dari aspek- aspek lingkungan kerja. Penelitian ini bertujuan untuk memperbaiki lingkungan kerja pada bagian mesin puffing gun yang memproduksi beras lebih mengembang akibat dari suhu panas yang ditimbulkan oleh mesin sehingga menghasilkan bipang. Faktor- faktor lingkungan kerja fisik yaitu pencahayaan, temperatur, sirkulasi udara, kebisingan, warna, bau-bauan, dan hiburan (musik). Dari hasil penelitian pengukuran waktu kerja dengan metode langsung menunjukkan waktu baku sebesar berturut- turut 17,67 menit, 18,66 menit, dan 17,38 menit pada pukul 08.00, 13.00, dan 15.00. Setelah dilakukan perbaikan lingkungan kerja yaitu dengan memberikan ear plug dan pemasangan kipas angin, sehingga peningkatan efesiensi waktu baku sebesar 16,53%, 17,15%, dan 17,21%. Perbaikan lingkungan kerja fisik adalah adanya ventilasi di sisi kanan tembok atau menanam tanaman di sekitar tempat kerja dan tidak mendengarkan musik pada saat bekerja.
DETERMINATION OF THE OPTIMAL NUMBER OF EMPLOYEES USING THE FULL TIME EQUIVALENT (FTE) METHOD AT PT. XYZ Arfandi Ahmad; Nurhayati Rauf; Yusril Mahenra; Takdir Alisyahbana; muhammad dahlan; Andi Pawennari; Dirgahayu Lantara; Rahmaniah Malik
Journal of Industrial Engineering Management Vol 6, No 3 (2021): Journal of Industrial Engineering Management Vol. 6 No. 3
Publisher : Center for Study and Journal Management FTI UMI

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33536/jiem.v6i3.1071

Abstract

Determining the optimal number of employees in a company is a basic condition that must be concern into account when drafting a work plan. The work design process ultimately aims for balance the physical and mental aspects of humans in completing certain tasks so that. Determination of the number of employees whit the existing workload will support employees performance in perform their duties optimally. The purpose of this research is to determine the optimal number of salesman based on the workload calculated using the Full Time Equivlent method. Based on the results of research at PT. Xyz used the method FTE is know that the workload of the 4 salesman is classified as overloaded. Where is sales I has a workload of 1.48, sales II has a workload of 1.70, sales III has a workload of 1.66, sales IV get a workload of 1.42. Based on the table of labor requirements to the FTE value, the number of initial salesman was 4 sales and the addition of the number of salesman is as many as 10 salesmen. So, the optimal number of salesmen in Makassar city is 14 salesmen.
ANALYSIS OF QUALITY CONTROL OF T-SHIRT SCREEN PRINTING PRODUCTS WITH SIX SIGMA DMAIC METHOD ON CV. MACCA CLOTHING. Nurhayati Rauf; Ahmad Padhil; Takdir Alisyahbana; Anis Saleh; Muhammad dahlan; Rahmaniah Malik; Andi Pawennari; Nurul Chairany
Journal of Industrial Engineering Management Vol 7, No 1 (2022): Journal of Industrial Engineering and Management Vol 7 No 1
Publisher : Center for Study and Journal Management FTI UMI

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33536/jiem.v7i1.1147

Abstract

CV. Macca Clothing is a company engaged in Clothing screen printing. The resulting product is a short sleeve t-shirt screen printing. In producing the production, on average per month there are defective products of 6% types of defects, namely blurred colors, wrong colors, and wrong screen printing. Therefore, this study aims to providelevels sigma and DPMOand then analyze the factors causing disability and provide suggestions for improvements to reduce defective products at CVMacca Clothing. The data collection method used is to conduct interviews with CV.Macca Clothing. Then in analyzing the data using the method DMAIC and theapproach six sigma.From the research results, thevalue DPMO is 21,000 and the conversion result is 3.53, which means that out of a million opportunities there will be 3.53 possibilities for the production process to produce defective products. in thelevel stage  sigma CV.Macca Clothing has not yet reached thelevel Six Sigma, but it is still in the average industrial condition because in the production process there are still product defects that have not reached zero defect. The factors that cause defects in the product are the operator is not careful in doing the work, the quality of raw materials is not good, the cleanliness of the equipment is not maintained, and the production room facilities are inadequate. From the results of the analysis based on the implementation tools kaizen , the control and improvement to reduce defects that must be carried out by CV.Macca Clothing is to carry out stricter supervision or control, carry out regular machine maintenance, and provide complete facilities. 
ANALYSIS OF THE EFFECTIVENESS OF CLEAN WATER DISTRIBUTION MACHINE USING OVERALL EQUIPMENT EFFECTIVENESS (OEE) METHOD Abdul Mail; Muhammad Dahlan; Nurhayati Rauf; A Nurul Chairany; Arfandi Ahmad; Khhairunnisa Jufri
Journal of Industrial Engineering Management Vol 6, No 1 (2021): Journal of Industrial Engineering Management Vol. 6 No. 1
Publisher : Center for Study and Journal Management FTI UMI

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33536/jiem.v6i1.884

Abstract

Clean water distribution machines are very important for local drinking water companies to be able to supply clean water to customers. The need for water continues to increase, so an analysis is needed to determine the decline in engine pump performance in the production process. Maintenance activities need to be carried out to maintain the reliability (realiability) of the machine so that it can operate properly. Therefore, a good strategy is needed to maintain the continuity of the production process. The purpose of this research is to measure the performance of the water distribution pump machine / equipment associated with the low level of clean water production, to identify the losses experienced by the company. The Overall Equipment Effectiveness (OEE) value obtained before repairs were carried out in November 2019 for Lapi I was 69.38% and Lapi II was 69. 75% while in December 2019 for Lapi I it was 74.02% and Lapi II was 73.65% still below the JIPM standard, namely ≥85%. From the results of the six big losses, the clean water distribution pump machine as a whole still needs evaluation to make improvements in increasing effectiveness and productivity, especially in the problem of redeuced speed losses so that suggestions can be made to improve the clean water distribution machine. After repairs in January 2020 for Lapi I was 87.90% and Lapi II was 87.26% while in February 2020 for Lapi I it was 90.34% and Lapi II was 85.81%. From the results of the six big losses, the clean water distribution pump machine as a whole still needs evaluation to make improvements in increasing effectiveness and productivity, especially in the problem of redeuced speed losses so that suggestions can be made to improve the clean water distribution machine. After repairs in January 2020 for Lapi I was 87.90% and Lapi II was 87.26% while in February 2020 for Lapi I it was 90.34% and Lapi II was 85.81%. From the results of the six big losses, the clean water distribution pump machine as a whole still needs evaluation to make improvements in increasing effectiveness and productivity, especially in the problem of redeuced speed losses so that suggestions can be made to improve the clean water distribution machine. After repairs in January 2020 for Lapi I was 87.90% and Lapi II was 87.26% while in February 2020 for Lapi I it was 90.34% and Lapi II was 85.81%
Simulation on the Application Minister Agriculture Republic of Indonesia No. 28 the Year 2020 and Its Impact on the PT Pupuk Kujang Performance Fulki Fathurrahman; Muhammad Dahlan; Sofik Handoyo
Budapest International Research and Critics Institute-Journal (BIRCI-Journal) Vol 5, No 4 (2022): Budapest International Research and Critics Institute November
Publisher : Budapest International Research and Critics University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33258/birci.v5i4.7372

Abstract

This research was conducted on State-Owned Enterprises in Indonesia. This study aims to analyze the impact of the application of permentan RI number 28 of 2020 on the performance of PT Pupuk Kujang in terms of the company's profit, the company's financial ratio and the company's going concern using the altman Z-Score. Metode the research used is a mix method. The results showed that the implementation of Permentan no. 28 of 2020 has different significant on financial distress.  The benefit of this research is that PT Pupuk Kujang should be aware if the altman Z-Score value continues to decline so that whatisnot anticipated will bring the company into bankruptcy (Financial distress). This is due to the high sales of subsidized fertilizers as the main source of income.
Improving Ability to Write Complex Procedure Text Using Process Approach for Students of SMK Negeri 2 Bungoro Hanana Maulida; Muhammad Dahlan
Edumaspul: Jurnal Pendidikan Vol 6 No 2 (2022): Edumaspul: Jurnal Pendidikan
Publisher : Universitas Muhammadiyah Enrekang

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (290.327 KB) | DOI: 10.33487/edumaspul.v6i2.5180

Abstract

The purpose of this study was to describe the implementation of learning to write complex procedural texts using a process approach for students of SMK Negeri 2 Bungoro and to describe the improvement in learning to write complex procedure texts using a process approach for students of SMK Negeri 2 Bungoro. The process approach is a learning method that is still not used in the process of learning to write complex procedure texts. The purpose of this research is to describe how learning to write complex procedure texts is increased by using a process approach. This type of research is class action research which consists of two cycles, each cycle being held in two meetings. Research procedures include planning, implementation, action, observation, and reflection. The subjects in this study were 32 students of SMK Negeri 2 Bongoro. The method in this study used a qualitative research method in the form of PTK with observation, interview and documentation methods. The results showed that in the first cycle that was completed individually, namely 14 people (34.75%) out of 32 students who met the KKM completeness criteria, the average classical learning outcome was 63.19. Whereas in the second cycle there was an increase of 28 people (87.5%) out of 32 students fulfilling the KKM classical average learning outcomes of 80.56. Based on the results of this study, learning to write complex procedure texts using a process approach for students of class XI TKR 1 SMK Negeri 2 Bungoro has increased. Keyword: Writing, Complex Procedure Text, Process Approach
A Evaluasi Performa Website Divlearning Undipa Menggunakan Aotomated Software Testing GTMetrix Dengan Metode Pieces Zulkifly Zulkifly; Muhammad Dahlan; Erfan Hasmin; Hasyrif Hasyrif; Nurul Aini
Dipanegara Komputer Teknologi Informatika Vol 16 No 1 (2024): Jurnal Dipanegara Komputer Teknik Informatika (DIPAKOMTI)
Publisher : Dipanegara Komputer Teknologi Informatika

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Penelitian ini berkaitan dengan Universitas Dipa Makassar yang berfokus pada bidang informatika dan bisnis berbasis teknologi informasi. Universitas ini menggunakan aplikasi Divlearning, yaitu sistem pendidikan jarak jauh yang bertujuan untuk meningkatkan efisiensi dan efektivitas metode pembelajaran melalui internet. Namun, website Divlearning sering menghadapi masalah kecepatan akses dan eror, yang dapat mengurangi pengalaman pengguna dan membuat mereka enggan kembali mengunjungi website tersebut.Untuk mengatasi masalah tersebut, penulis melakukan dua hal yaitu pengujian menggunakan software GTMETRIX untuk mengidentifikasi variabel penyebab menurunnya kecepatan dan terputusnya akses pada website Divlearning, dan penulis juga menyebarkan kuesioner untuk mengetahui tanggapan pengguna melalui Google Form. Penelitian ini menggunakan metode PIECES, yaitu metode analisis yang meliputi kinerja informasi, ekonomi, keamanan, efisiensi, dan pelayanan, guna mengidentifikasi kelemahan sistem dan merekomendasikan perbaikan yang dibutuhkan pada website Divlearning.Dengan melakukan pengujian dan analisis, penulis berharap dapat membantu meningkatkan performa Situs web Divlearning serta kualitas keseluruhan sistem pembelajaran jarak jauh Universitas Dipa Makassar.
Hubungan Jarak Kehamilan dan Pekerjaan Ibu dengan Kejadian Abortus di Rsia Ananda Makassar Tahun 2021 Khadiamsi, Aura Audhilla; Najamuddin; Rahim, Rosdianah; Sakti, Dachlia Sri; Muhammad Dahlan
Alami Journal (Alauddin Islamic Medical) Journal Vol 8 No 1 (2024): JANUARY
Publisher : Universitas Islam Negeri Alauddin Makassar

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24252/alami.v8i1.35904

Abstract

Maternal mortality is a health problem in Indonesia as the number of cases is relatively high at 7.389 cases which the main cause being bleeding, especially abortion bleeding in young pregnancies. The purpose of this study was to determine the influences of inter-pregnancy interval and the working load of mothers on the occurrences of abortion at RSIA Ananda Makassar in 2021. This research also attempted to investigate the most dominant risk factors causing abortion. The methodological approach used in this research was quantitative analytical research with a case-control design. The sampling method was a purposive sampling technique consisting of 234 samples divided into 117 case samples and 117 control samples obtained from medical record data. The findings of this Chi-square analysis test indicated that the p-value of pregnancy interval and occupation was 0.000 (p<0.05), and the results of the multiple regression test showed an OR value of 3.018 for the occupational variable. Therefore, this study concluded that there were significant influences of the inter-pregnancy interval and maternal occupation on the abortus incidence at RSIA Ananda Makassar in 2021, with the inter-pregnancy interval being considered the most dominant risk factor for abortion.