Claim Missing Document
Check
Articles

Found 31 Documents
Search

Analisis Citra Permukaan Isolasi Listrik Dari Bahan LDPE-NR Akibat Aktifitas Peluahan Sebagian Darwison Darwison; Aulia Aulia
JURNAL NASIONAL TEKNIK ELEKTRO Vol 6, No 1: Maret 2017
Publisher : Jurusan Teknik Elektro Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (272.942 KB) | DOI: 10.25077/jnte.v6n1.369.2017

Abstract

The correlation between the partial discharge (PD) pulses count and the surface of the related sample was studied and reported in this paper. The assessment was done by testing different samples of the composite low density polyethylene (LDPE) and natural rubber (NR) under a high electric field for 60 minutes. The results showed a strong correlation between the images of the sample surface after testing by the number of PD pulses is counted. The high of PD pulses counted are highly correlated with the larger scale of surface area damaged.Keywords : partial discharge, composite, polyethilene, natural rubber, surface pictureAbstrak— Korelasi antara jumlah pulsa peluahan sebagian (PD) dengan tingkat kerusakan permukaan sampel dikaji dalam makalah ini. Pengkajian dilakukan dengan menguji sampel berbeda dari komposit polietilen berkerapatan rendah (LDPE) dan karet alam (NR) di bawah pengaruh medan listrik tinggi selama 60 menit. Hasil memperlihatkan adanya korelasi yang kuat antara citra permukaan sampel setelah pengujian dengan jumlah pulsa PD yang terhitung. Jumlah pulsa PD yang tinggi berkorelasi dengan luas citra pemukaan sampel rusak yang lebih besar.Kata Kunci : peluahan sebagian, komposit, polietilen, karet alam, citra permukaan
Prediction of ZnO Surge Arrester Degradation Based on Temperature and Leakage Current Properties Novizon Novizon; Zulkarnain Abdul-Malek; Aulia Aulia; Eka Putra Waldi; Abdul Rajab; Darwison Darwison
JURNAL NASIONAL TEKNIK ELEKTRO Vol 7, No 2: July 2018
Publisher : Jurusan Teknik Elektro Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (435.089 KB) | DOI: 10.25077/jnte.v7n2.501.2018

Abstract

Temperature and leakage current on the ZnO arrester are interrelated with each other. In low conduction region, voltage-current characteristics of ZnO surge arrester are highly dependent on temperature. The leakage current will increase as the temperature increases and experience thermal runaway when the temperature exceeds the acceptable limit. This phenomenon is associated with the increase of resistive leakage current due to degradation. Therefore the temperature and leakage current are good indicator to evaluate the condition of ZnO arrester. This paper proposed the degradation  prediction of ZnO surge arrester by analyzed the temperature and leakage current. The 132 kV station type ZnO surge arrester was employed. Temperature profile of ZnO arrester was obtained using thermal camera. The leakage current was measured simultaneous with the temperature measurement to attain the leakage current at the actual temperature. The results shows the leakage current continue increasing by increasing the temperature. Keywords : Resistive leakage current, temperature, degradation, prediction, zinc oxide surge arrester
Pengaruh Penuaan Elektrik Terhadap Karakteristik Tegangan Tembus dan PDIV Minyak NanoNynas Aulia Aulia; Abdul Manab; Eka Putra Waldi; Muhammad Kodrat; Gusvita Widia
JURNAL NASIONAL TEKNIK ELEKTRO Vol 7, No 1: March 2018
Publisher : Jurusan Teknik Elektro Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (202.538 KB) | DOI: 10.25077/jnte.v7n1.522.2018

Abstract

The dielectric strength of pure nynas oil can be enhanced by adding various nanoparticles such as nanoalumina (Al2O3). To see the effect of the addition of alumina nanoparticles, 4 types of nynas oil have been prepared with the addition of nanoalumina particles by 0.00%, 0.010%, 0.015% and 0.020%. All samples were tested for dielectric breakdown voltage and partial discharge inception voltage (PDIV) test at room temperature with reference to IEC 60156 test standards. The results showed that the nanonynas oil breakdown voltage increased by 6% and the value of the partial discharge inception voltage also higher than that of pure oil. Keywords : Mineral oil, alumina, brekadown voltage, partial discharge inception voltageAbstrakKekuatan dielektrik minyak transformator nynas nitro murni dapat ditingkatkan dengan menambahkan berbagai partikel nano seperti nanoalumina (Al2O3).Penelitian ini bertujuan untuk melihat effek penambahan partikel nano alumina terhadap karakteristik tegangan tembus dan tegangan insepsi peluahan sebagian. Empat jenis minyak nynas dengan komposisi penambahan partikel nanoalumina sebesar 0.00%, 0.010%, 0.015% dan 0.020% diuji tegangan tembus dielektrik, tegangan insepsi peluahan sebagian (PDIV) pada suhu ruang dengan merujuk kepada standar pengujian IEC 60156. Hasil menunjukkan bahwa tegangan tembus minyak nanonynas meningkat sebesar 6% dan nilai tegangan insepsi dan peluahan sebagian lebih tinggi dibandingkan dengan minyak murni. Kata Kunci : Minyak  nynas nitro libra, alumina (AL2O3), tegangan tembus, PDIV
Pengaruh Partikel Nanosilika Terhadap Sifat Tolak Air Bahan Isolasi Bionanokomposit Aulia Aulia; Roan Alfajri; Eka Putra Waldi; Novizon Novizon
JURNAL NASIONAL TEKNIK ELEKTRO Vol 9, No 2: July 2020
Publisher : Jurusan Teknik Elektro Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (271.451 KB) | DOI: 10.25077/jnte.v9n2.716.2020

Abstract

The nature of hydropobicity plays an important role of an insulator, especially the outdoor insolator which is always exposed to hot, cold, humid weather and rain water. In the long run, the surface of the insulator can be damaged and its hydropobicity properties will be reduced or even lost so that surface discharge events will be easier to occur, especially in the rainy season. As a new material being developed, bionanocomposite insulation materials from LDPE, natural rubber and nanosilica fillers have passed several dielectric properties such as partial discharge characteristics under normal conditions and at higher temperature conditions. To complete the assessment of dielectric properties, a new bionanocomposite material hydropobicity was tested. There were 4 types of samples tested with the weight of the nanosilica material 1.5%, 3.0%, 4.5% and 6% of the total weight of the biocomposite sample. The test was carried out using a high-resolution camera to take pictures of the surface of the insulator sample that was dripped with water. The results show that nanosilica can increase the angle of contact of water with the bionanocomposite surface. This increase indicates an increase in the hydropobicity of bionanocomposite materialKeywords : LDPE, Karet Alam, Natural Rubber, nanosilica, hydrophobisity AbstrakSifat hidropobisitas memainkan peran penting dari sebuah isolator, terutama isolator pasang luar yang selalu terpapar oleh perubahan cuaca panas, dingin, lembab dan air hujan. Dalam jangka panjang, permukaan isolator bisa rusak dan sifat hidropobisitasnya akan berkurang bahkan hilang sehingga peristiwa peluahan permukaan akan lebih mudah terjadi, terutama pada musim hujan. Sebagai material baru yang sedang dikembangkan, bahan isolasi bionanokomposit dari polietilena berkerapatan rendah (LDPE), karet alam (NR) dan pengisi nanosilika telah melewati beberapa pengujian sifat dielektrik seperti karakteristik peluahan sebagian pada kondisi normal dan pada kondisi suhu yang lebih tinggi. Untuk melengkapi pengkajian sifat dielektrik, maka dilakukan pengujian sifat hidropobisitas bahan bionanokomposit yang baru tersebut. Sampel yang diuji ada 4 jenis dengan kada berat bahan nanosilika 1,5%, 3,0%, 4,5% dan 6% dari berat total sampel biokomposit. Pengujian dilakukan dengan menggunakan kamera beresolusi tinggi untuk mengambil gambar permukaan sampel isolator yang ditetesi air. Hasil menunjukan bahwa nanosilika dapat memperbesar sudut kontak air dengan permukaan bionanokomposit. Peningkatan ini mengindikasikan meningkatnya sifat hidropobisitas material bionanokomposit.Kata Kunci : Biokomposit, Hidropobisitas, Karet Alam, LDPE
Partial Discharge and Breakdown Strength of Plasma Treated Nanosilica/LDPE Nanocomposites N. A. Awang; M. H Ahmad; Z. Abdul-Malek; Z. Nawawi; M. A. B. Sidik; M. I. Jambak; Aulia Aulia; E. P. Waldi
Proceeding of the Electrical Engineering Computer Science and Informatics Vol 5: EECSI 2018
Publisher : IAES Indonesia Section

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (774.405 KB) | DOI: 10.11591/eecsi.v5.1707

Abstract

Nanocomposites have been actively studied in recent years as an insulating material due to their excellent in electrical, mechanical and thermal properties. Even though, the addition of nanoparticles into polymer matrices showed better performance in relation to partial discharge (PD) and AC breakdown strength tests. However, the introduction of nanoparticles could lead to the formation of agglomeration of the fillers which may nullify the true capabilities of the composites. Therefore, silane coupling agent was introduced for surface functionalization treatment of the nano filler but among the issues associated are toxicity and complexity. In the present study, atmospheric pressure plasma is proposed to enhance the surface functionalization of the nano filler. This proposed method was used to treat the nanosilica (SiO 2 ) surfaces to enhance the interfacial interaction between the host (LDPE) and nano filler. SiO 2 nano filler was added into the LDPE at weight percentages of 1, 3 and 5%. The phase-resolved PD behaviour and Weibull analysis of AC breakdown strength of untreated and plasma-treated LDPE nanocomposites were measured to evaluate the performance of the samples. As results, the plasma treated LDPE nanocomposites experience apparent increments of the PD resistance and AC breakdown strength as compared to the untreated nanocomposites. It is implied that the plasma treatment of nanosilica has contributed to the enhancement of the filler dispersion and eventually reducing the agglomeration.
SUPPRESSION AND MITIGATION OF COVID-19 THROUGH KKN ACTIVITIES IN NAGARI Darwison Darwison; Aulia Aulia
LOGISTA - Jurnal Ilmiah Pengabdian kepada Masyarakat Vol 5 No 2 (2021)
Publisher : Department of Agricultural Product Technology, Faculty of Agricultural Technology, Universitas Andalas Kampus Limau Manis - Padang, Sumatera Barat Indonesia-25163

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/logista.5.2.216-223.2021

Abstract

Perlunya kesadaran masyarakat akan protocol kesehatan terutama dalam masa pandemi untuk pengurangi penyebaran virus corona di Indonesia khususnya di nagari. Untuk itu dapat dilakukan langkah-langkah supresi dan mitigasi covid-19 di nagari dengan melibatkan semua unsur masyarakat antara lain melibatkan mahasiswa KKN. Dengan kegiatan KKN ini dapat mengurangi dampak pandemi covid-19 antara lain dalam bentuk kegiatan mahasiswa sesuai bidang studinya dan melibatkan media massa seperti website, blog, Instagram, pamflet, dan spanduk. Berdasarkan hasil kuisioner terhadap kegiatan mahasiswa KKN maka disimpulkan 67% menyatakan berdampak positif.
Sistem Pengukuran Suhu Tubuh Menggunakan AMG8833 Dan Kinect Sebagai Pencegahan Penularan Covid-19 Wiwin Lovita; Aulia; Junaldi
Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi) Vol 6 No 1 (2022): Februari 2022
Publisher : Ikatan Ahli Informatika Indonesia (IAII)

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (386.358 KB) | DOI: 10.29207/resti.v6i1.3687

Abstract

The purpose of this study is to create an effective and safe body temperature measurement system to prevent the transmission of covid-19 using the AMG8833 and Kinect. The method of sending data uses the Internet of Thing (IoT) and face tracking with 3D form as face identification using a kinect type xbox 360 using an arduino uno and a buzzer connected to the AMG8833. AMG8833 has an infrared detector which is arranged in an 8x8 array and reads body temperature non-contact by detecting infrared energy from the body. kinect recognizes facial features based on the distance of the kinect position coordinates on the face. AMG8833 and kinect as input, Arduino uno as AMG8833 data processing and buzzer gives a sound signal if the temperature is above 37.10 0C. Body temperature measurement data was carried out 3 times, namely at a distance of 5,10 and 15cm. Measurement data from this body temperature measuring instrument are compared with a thermogun average error value of 0.11% with a difference between the maximum and minimum average body temperatures of 0.04%. It is hoped that body temperature measurements can be as a precaution against the spread of covid-19.
Artificial Neural Network Application for Thermal Image Based Condition Monitoring of Zinc Oxide Surge Arresters Novizon Novizon; Zulkurnain Abdul-Malek; Aulia Aulia
Indonesian Journal of Electrical Engineering and Computer Science Vol 7, No 3: September 2017
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijeecs.v7.i3.pp593-605

Abstract

Manual analysis of thermal image for detecting defects and classifying of condition of surge arrester take a long time. Artificial neural network is good tool for predict and classify data. This study applied neural network for classify the degree of degradation of surge arrester. Thermal image as input of neural network was segmented using Otsu’s segmentation and histogram method to get features of thermal image. Leakage current as a target of supervise neural network was extracted and applied Fast Fourier Transform to get third harmonic of resistive leakage current. The classification results meet satisfaction with error about 3%.
Analysis of Exhaust Gas Heat Utilization in Waste Heat Recovery Power Generator at Indarung V Factory PT Semen Padang Mayang Safira; Melda Latif; Zaini Zaini; Aulia Aulia; Mumuh Muharam; Waweru Njeri
Andalas Journal of Electrical and Electronic Engineering Technology Vol. 3 No. 1 (2023): May 2023
Publisher : Electrical Engineering Dept, Engineering Faculty, Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/ajeeet.v3i1.34

Abstract

Increasing energy efficiency in the cement production process at PT Semen Padang is carried out by reusing exhaust gas to produce electricity using Waste heat recovery power generation (WHRPG) with a capacity of 8.5 MW. WHRPG is a technology for utilizing exhaust gas heat as a source of heat energy to heat feed water into steam by using a suspension preheater (SP) boiler and air quenching cooler (AQC) boiler. This study aims to calculate the power potential of the steam heat influenced by the steam temperature and the mass flow rate of the steam produced by the boiler, to calculate the efficiency of the boiler using the direct method by comparing the boiler output heat against the boiler input heat, to calculate the turbine efficiency based on the difference between the steam enthalpy enter the turbine against the steam enthalpy out of the turbine and the isotropic enthalpy of the steam out of the turbine and to calculate the power generated by WHRPG at PT Semen Padang. The results obtained in this study are the total potential power of steam heat is 19.778 MW, the boiler AQC efficiency is 70.30%, the boiler SP efficiency is 94.04% and the turbine efficiency is 78.64%. The electricity generated by PT Semen Padang's WHRPG is 3.70 MW.
External Leakage Current Separation to Determine Arrester Condition Due to Contamination Novizon Novizon; Mondrizal Mondrizal; Darwison Darwison; Aulia Aulia; Tesya Uldira Septiyeni
JURNAL NASIONAL TEKNIK ELEKTRO Vol 12, No 2: July 2023
Publisher : Jurusan Teknik Elektro Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jnte.v12n2.1026.2023

Abstract

Leakage current measurements can be used to determine the aging condition of the ZnO arrester. The leakage current that occurs in the arrester is divided into two, namely external and internal leakage currents. The external leakage current is affected by contamination and the internal leakage current is affected by the aging of the varistor in the arrester. The external and internal leakage currents are measured separately to determine their contribution to the arrester condition. In this study, the effect of salt contamination on the arrester was studied further. The level of contamination used consisted of low, medium and heavy. The obtained leakage current is analyzed using wavelet energy. The results of this study indicate that the wavelet energy of each leakage current is different and can be used as an indicator in further analysis. The conclusion obtained is that the external leakage current is affected by contamination and has a different energy with the internal leakage current due to aging of the varistor arrester components.