Claim Missing Document
Check
Articles

Found 23 Documents
Search

THE EFFECT OF VARIATION OF MIXTURE OF IJUK FIBER AND COCONUT FIBER WITH EPOXY MATRIX ON THE MECHANICAL STRENGTH OF COMPOSITE Li, Elia Fransisco Manalu; Yulianto, Dody; Kurniadi, Shandy; Prasetyo, Ari; Saragih, Sehat Abdi; Lazrisyah, Sutan; Rahman, Jhonni; Hastuti, Kurnia; Elfiano, Eddy
Journal of Renewable Energy and Mechanics Vol. 8 No. 02 (2025): REM VOL 8 No 02 2025
Publisher : UIR PRESS

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Fibre-based composites continue to be investigated and developed as alternative materials to replace metals, primarily due to their advantageous properties of high strength and lower weight compared to metals. This study aims to fabricate fibre composites using ijuk fibres and coconut coir fibres as a matrix with epoxy resin. In this research, mixtures of ijuk fibres, coconut coir fibres, and epoxy resin were prepared in proportions of 20%:30%:50%, 25%:25%:50%, and 30%:20%:50%. The highest bending strength test results were obtained in specimen 3, which consisted of a mixture of 30% palm fibre, 20% coconut fibre, and 50% epoxy resin.  This specimen had a tensile strength value of 18.93 MPa and an impact value of 0.387 Joules/mm². This result can be attributed to the increasing proportion of ijuk fibres and the decreasing proportion of coconut coir fibres within the epoxy resin matrix, which influences the elastic strain of the fibre core (cellulose). The higher cellulose content of ijuk fibres enhances bending strength and impact resistance. This is supported by the impact (Charpy) test results, where specimen 3 (30%: 20%:50%) exhibited the highest bending and impact strength. Conversely, increasing the proportion of coconut coir fibres reduced the impact strength. The fracture morphology revealed that specimen 1 exhibited a brittle fracture, whereas specimens 2 and 3 exhibited a fibrous brittle fracture.
PENERAPAN TEKNOLOGI PENGAIRAN UNTUK PERTANIAN SWASEMBADA DI MARKIZ DARUL QUR’AN WASSUNNAH Jhonni Rahman; Sutan Lazrisyah; Eddy Elfiano; Purwo Subekti; Husnul Kausarian
Abdi Teknoyasa Vol. 6 No. 2 (2025): Volume 6, Nomor 2, Desember 2025
Publisher : Universitas Muhammadiyah Surakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23917/abditeknoyasa.v6i2.14753

Abstract

Program pengabdian masyarakat ini dilaksanakan di Pondok Pesantren Markiz Darul Qur’an Wassunnah sebagai upaya mengatasi keterbatasan sumber dan distribusi air yang berdampak pada rendahnya produktivitas pertanian dan peternakan. Kegiatan ini bertujuan meningkatkan efisiensi sistem pengairan pertanian melalui penerapan teknologi submersible pump pada lahan kelompok tani mitra. Sebelum program diterapkan, petani menghadapi keterbatasan pasokan air irigasi akibat ketergantungan pada curah hujan serta penggunaan metode pengangkutan air manual yang memerlukan waktu dan tenaga besar. Kondisi tersebut menyebabkan keterlambatan masa tanam, ketidakteraturan irigasi, dan penurunan hasil produksi. Melalui program ini, dilakukan instalasi submersible pump yang disesuaikan dengan kebutuhan lahan, disertai pelatihan operasional dan perawatan bagi petani. Hasil implementasi menunjukkan peningkatan signifikan pada ketersediaan air, dengan debit yang lebih stabil dan distribusi yang lebih merata. Efisiensi waktu pengairan meningkat lebih dari 50%, serta kondisi pertumbuhan tanaman menunjukkan perbaikan nyata. Peningkatan kapasitas petani dalam mengoperasikan teknologi turut mendukung keberlanjutan program. Secara keseluruhan, teknologi submersible pump terbukti efektif sebagai solusi pengairan yang meningkatkan produktivitas dan efisiensi kerja petani.
Effect of hydraulic pneumatic pressing pressure on the physical quality and production performance of gambier Septian; Rahman, Jhonni; Kurniadi, Shandy; Abd Rahman, Hamimah; Rosli, Masli Irwan
Journal of Renewable Energy and Mechanics Vol. 9 No. 02 (2026): REM VOL 9 No 02 2026
Publisher : UIR PRESS

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25299/rem.2026.29189

Abstract

Gambier (Uncaria gambir Roxb.) is an important Indonesian plantation commodity whose physical quality and processing productivity are strongly influenced by the pressing stage. This study evaluated the effect of hydraulic–pneumatic operating pressure on gambier pressing performance and physical characteristics. We conducted experiments at five pressure levels (1, 3, 5, 7, and 8 bar), using an initial material mass of 5 kg for each test. We calculated the following parameters: pressing force, product density, estimated production capacity, wet-basis moisture content after pressing, and water removal during pressing. Pressures of 1 and 3 bar were insufficient to form a compact product. Within the effective range of 5–8 bar, increasing pressure increased product density from 1162.67 to 1270.40 kg/m³ and estimated production capacity from 14.88 to 23.42 kg/h. The calculated pressing force increased from 491.07 N at 5 bar to 785.71 N at 8 bar. Water removal based on the initial mass increased from approximately 0.60% at 5 bar to 5.00% at 8 bar. Among the tested conditions, 8 bar provided the best overall performance. However, because we did not evaluate pressures above 8 bar or energy consumption, this condition should be regarded as the best tested pressure rather than a globally optimised operating point.