Claim Missing Document
Check
Articles

Found 3 Documents
Search
Journal : Rekayasa Mesin

Analisis Penambahan Coupling Agent terhadap Sifat Tarik Biokomposit Kulit Waru (Hibiscus Tiliaceus)-Polyester Wirawan, Willy Artha; Widodo, Teguh Dwi; Zulkarnain, Akbar
Jurnal Rekayasa Mesin Vol 9, No 1 (2018)
Publisher : Jurusan Teknik Mesin, Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (585.809 KB) | DOI: 10.21776/ub.jrm.2018.009.01.6

Abstract

The aim of this research is to investigate the effect addition of silane coupling agents of Waru bast-polyester composite on tensile strength. Biocomposite is an innovation in material engineering made from the environment-friendly and potentially-developed bast fibers of Waru tree. Waru bast fibers, as reinforcement, were prepared by alkali procces employing using 6% NaOH solution for 120 minutes and then were added coupling agent with variation of 0%, 0.25%, 0.5%, 0.75% and 1.0%. The biocomposite was formed by continuous fiber arrangement using 60:40 fiber-matrix mass fractions with vacuum pressure resin infusion method. Tensile test specimens were formulated base ASTM D638-03 standard. Biocomposite investigation was performed by tensile test, while bond quality observation utilized use micro photo. The results of the study show that the highest strength of biocomposite was 401,368 Mpa on the silane coupling agent addition0.75%
REVIEW: VARIOUS TREATMENTS NAOH, SEA WATER, FUMIGATION, LIQUID SMOKE TO IMPROVE TENSILE STRENGTH AND SURFACE MORPHOLOGY OF NATURAL FIBER Muslimin, Mukhlis; Wirawan, Willy Artha; Palungan, Musa Bondaris
Jurnal Rekayasa Mesin Vol. 15 No. 2 (2024)
Publisher : Jurusan Teknik Mesin, Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/jrm.v15i2.1600

Abstract

This article is a literature review of several studies oriented toward the treatment of natural fiber to improve the surface morphology and tensile strength of the fiber. The method used is to review several studies that describe the physical and mechanical properties of natural fiber with different treatments such as immersion of sago fiber in liquid smoke, coconut fiber in NaOH, palm fiber in seawater, and smoking of king pineapple fiber, and banana stem fiber with liquid smoke. The results of the review showed that the treatment was able to increase the tensile strength of sago fiber by 26.77%, coconut fiber by 81.25%, palm fiber by 67.40%, waru bark fiber by 59,97%, coconut fiber with limestone water 34,96 %, king pineapple fiber by 74.45%, and banana stem fiber by 43.78%. The effect of some of these treatments can also change the morphology of the fiber. So, it was concluded that treatment was needed to change the physical properties of the fiber in the form of morphology and mechanical properties in the form of better fiber tensile strength so that the fiber used as a composite reinforcement could improve the mechanical properties of the composite.
REVIEW: VARIOUS TREATMENTS NAOH, SEA WATER, FUMIGATION, LIQUID SMOKE TO IMPROVE TENSILE STRENGTH AND SURFACE MORPHOLOGY OF NATURAL FIBER Muslimin, Mukhlis; Wirawan, Willy Artha; Palungan, Musa Bondaris
Jurnal Rekayasa Mesin Vol. 15 No. 2 (2024)
Publisher : Jurusan Teknik Mesin, Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/jrm.v15i2.1600

Abstract

This article is a literature review of several studies oriented toward the treatment of natural fiber to improve the surface morphology and tensile strength of the fiber. The method used is to review several studies that describe the physical and mechanical properties of natural fiber with different treatments such as immersion of sago fiber in liquid smoke, coconut fiber in NaOH, palm fiber in seawater, and smoking of king pineapple fiber, and banana stem fiber with liquid smoke. The results of the review showed that the treatment was able to increase the tensile strength of sago fiber by 26.77%, coconut fiber by 81.25%, palm fiber by 67.40%, waru bark fiber by 59,97%, coconut fiber with limestone water 34,96 %, king pineapple fiber by 74.45%, and banana stem fiber by 43.78%. The effect of some of these treatments can also change the morphology of the fiber. So, it was concluded that treatment was needed to change the physical properties of the fiber in the form of morphology and mechanical properties in the form of better fiber tensile strength so that the fiber used as a composite reinforcement could improve the mechanical properties of the composite.