Claim Missing Document
Check
Articles

Found 2 Documents
Search
Journal : MINERAL

Analisis Uji Kuat Tekan Uniaksial Batupasir Pada Formasi Pamaluan, Kecamatan Longikis, Kabupaten Paser, Provinsi Kalimantan Timur Musodiq Musodiq; Tommy Trides; Shalaho Dina Devy; Revia Oktaviani; Albertus Juvensius Pontus
MINERAL Vol 8 No 1 (2023): MINERAL
Publisher : Jurusan Teknik Pertambangan Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/mineral.v8i1.3921

Abstract

The uniaxial compressive strength test was carried out to determine the value of rock strength. This research was conducted on sandstones in the Pamaluan Formation. The tests carried out in this study were physical properties tests, compressive strength tests and grain size tests on sandstones with a total of 30 samples on the physical properties test, 10 samples on the mechanical test and 500 gram grain size test at each point, the purpose of which is to determine the effect of porosity on the compressive strength of rock. In testing the physical properties carried out, the lowest and highest porosity values ​​were 17.27 and 22.91%. The results of the compressive strength test with the lowest and highest values ​​were 3.05 and 7.63 MPa. The grain size test results at points 1 and 2 are the same, namely fine sandstones with a percentage of 45 and 44%. From the results of research that has been done the value of porosity and grain size is very influential on the compressive strength test.
Pengukuran Volume Overburden Menggunakan UAV di Pit 3HWE PT Indominco Mandiri: Measuring Overburden Volume Using UAV at Pit 3HWE PT Indominco Mandiri Sendana, Aprianto Aris; Magdalena, Henny; Devy, Shalaho Dina; Trides, Tommy; Respati, Lucia Litha
MINERAL Vol 10 No 1 (2025): MINERAL
Publisher : Program Studi Teknik Pertambangan Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/vjs1rh30

Abstract

This study aims to measure the overburden volume at Pit 3HWE, PT. Indominco Mandiri using Unmanned Aerial Vehicle (UAV) technology. The use of UAV for volume measurement offers a more efficient and accurate alternative compared to conventional methods. In this research, aerial images were captured using a UAV and processed with photogrammetry software to generate a digital surface model (DSM) and 3D maps. The overburden volume calculations were analyzed and compared with manual measurement data as a reference. The results indicate that UAV usage provides accurate results with higher time efficiency, making it a viable method for mining operations. Factors affecting the measurement results, such as weather conditions and image resolution, were also analyzed in this study.