Claim Missing Document
Check
Articles

Found 35 Documents
Search

PENINGKATAN PRESTASI HASIL BELAJAR MATA PELAJARAN PEMBIAKAN TANAMAN SECARA VEGETATIF DENGAN MENGGUNAKAN METODE BERPIKIR, BERKELOMPOK, DAN BERBAGI (THINK PAIR AND SHARE) PADA SISWA KELAS X ATP SMK NEGERI 6 TAKALAR Arifin, Tuti Handayani; Rera, Fiskia; Yanto, Subari
Jurnal Pendidikan Teknologi Pertanian Vol 2, No 2 (2016): Agustus
Publisher : Universitas Negeri Makassar

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1465.459 KB) | DOI: 10.26858/jptp.v2i2.5173

Abstract

The objectives of classroom action research is to find out how far the achievement results of student of class X ATP SMK Negeri 6 Takalar after Think, Pair, and Share methods are applied. This research is a classroom action research conducted in two cycles. The first cycle conducted four times and the second cycle conducted two times. The research subjects were all students of class X ATP consists of 24 students. Data were analyzed using quantitative and qualitative data. The results concluded that the used of Think, Pair, and Share methods can improve the performance results of class X ATP SMK Negeri 6 Takalar. Student achievement increased measured by evaluation test of the first and second cycle
Pengaruh Kinerja Mesin Diesel Terhadap Nitrogen Oksida (NOx) pada Emisi Gas Buang Baharuddin, Fiskia Rera
Teknik Mesin "TEKNOLOGI" Vol 13, No 3 Apr (2011)
Publisher : Universitas Negeri Makassar

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Proses pembakaran atau penguapan bahan bakar tersebut akan menghasilkan gas buang (emisi). Atmosfer yang bisa disebut udara yang terdiri dari gas utama, yaitu Oksigen (O2) sebanyak kurang lebih 21% volume dan Nitrogen (N2) sebanyak kira-kira 78% dari bagian atmosfer. Sisa 1% lainnya dari berbagai gas, yaitu Argon (Ar) sebanyak 0,94%, sisanya 0,06% terdiri dari CO2, CO, CxHy, NOx, SOx, dan lain-lain. Tujuan dari penelitian ini adalah mengetahui pengaruh kinerja mesin mesin diesel Yanmar  L-40-E-DT terhadap kandungan NOx pada emisi gas buang. Pada pengujian ini dilakukan variasi pembebanan yaitu 750,1000 dan 1250 gram pada putaran mesin konstan 3000 rpm.  Berdasarkan hasil penelitian dan pembahasan dapat diketahui bahwa daya mesin 0,349 – 0,518 (KW), oksida nitrogen berkurang  dari   84% menjadi 50 %, Semakin besar pembebanan kadar oksida nitrogen juga mengalami penurunan dari 84 hingga 50 %. Perubahan Efisiensi thermal sangat mempengaruhi penurunan dan kenaikan unsur- unsur kimia yang terkandung didalam gas buang,Efisiensi Thermal 16,66 – 24,33%, kadar oksida nitrogen turun dari 84 – 50 %. Kata kunci: Kinerja mesin, Emisi gas buang NOx
Analisis Ergonomi Lingkungan Fisik Bengkel Kerja Program Keahlian Teknik Permesinan SMK di Kota Makassar Baharuddin, Fiskia Rera; Palerangi, Andi Muadz
Teknik Mesin "TEKNOLOGI" Vol 17, No 1 Okt (2017): Jurnal Teknik Mesin TEKNOLOGI
Publisher : Universitas Negeri Makassar

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1079.891 KB)

Abstract

Ergonomic physical environment workshop is one of the supporting factors in the process of vocational learning, especially the practicum. The main problems in this activity are the ergonomic conditions of the physical environment workshop is less conducive thermal comfort aspects, minimal lighting, disturbing noise, and poorly designed workspace such as oil fluid and equipment scattered on the floor. This condition can lead to fatigue, negligence and accidents, which will affect the development and improvement of students’ competence. The purpose of this study is to know the description and information about ergonomic standard of ideal physical environment including thermal, lighting, acoustic (noise), and work room design. This study is a quantitative approach with survey method. The technique of collecting data uses observation and direct measurement. The result of descriptive analysis and conclusion shows that; (1) the thermal comfort is at 32.10 °C, while the ideal standard ranges from 24 °C-27 °C; (2) llighting with a value of 460.26 Lux while the ideal standard ranges from 200 to 300 Lux; (3) the illusion (noise) with a value of 80.97 dB, while the ideal standard for space theory ranges between 35-45 dB and practical space of 85 dB, and: (4) spatial design with 46.21 m2 results, while the standard ideal size for each work unit ranges from 64 m2. Keywords: ergonomic, physical environment, workshop 
Perancangan Alat Penepat Asah Pahat Baharuddin, Fiskia Rera; Rukma, Ady
Teknik Mesin "TEKNOLOGI" Vol 11, No 2 Apr (2010)
Publisher : Universitas Negeri Makassar

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (88.485 KB)

Abstract

Dalam pembuatan benda kerja dengan menggunakan mesin bubut, pahat sangat berperan aktif karena pahat merupakan alat yang akan menyayat benda yang akan dibuat nantinya dan juga tingkat kehalusan dari benda yang akan dibuat itu tergantung dari ketajaman pahat dan sudut kemiringan dari pahat tersebut.Hasil pengasahan pahat yang baik sangat berpengaruh terhadap hasil benda kerja terutama kekasaran dan tebal penyayatan. Untuk itu, dengan merancang alat penepat asah pahat diharapkan dapat menjadi solusi dalam proses pengasahan pahat bagi pengguna mesin perkakas sehingga kelemahan-kelemahan dalam proses pengasahan pahat secara manual dapat ditanggulangi sehingga bentuk mata pahat yang diinginkan dapat tercapai. Dari tabel diatas terlihat bahwa pencapaian sudut pahat ideal dengan menggunakan alat penepat pengasah pahat lebih baik dibandingkan dengan pengasahan manual. Maka dapat disimpulkan dengan menggunakan alat penepat asah pahat ini maka ketepatan sudut dari pahat dapat diperoleh sesuai dengan sudut potong yang diinginkan. Dan alat penepat asah pahat dapat mengefisienkan pengasahan pahat baik dari segi waktu maupun material pahat. Kata kunci : Alat penepat, pahat, pengasahan
COMFORT TEMPERATURE AND LIGHTING INTENSITY: ERGONOMICS OF LABORATORY ROOM MACHINE TOOLS Idkhan, A. Muhammad; Baharuddin, Fiskia Rera
International Journal of Environment, Engineering and Education Vol 1 No 2 (2019)
Publisher : Three E Science Institute

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (487.062 KB) | DOI: 10.5281/zenodo.3477838

Abstract

Laboratories that meet ergonomic standards will support the learning process, both academically and technically, to facilitate the growth and development of skills. This study aims to uncover and provide an overview and information about laboratory ergonomics standards which include thermal comfort (temperature), workspace laboratory lighting. This study uses a quantitative approach with a survey method carried out in the Machine Tool Unit Laboratory of the Department of Mechanical Engineering Education with a population of 60 students who are carrying out practicum. Techniques using direct observation and measurement. Lux Meter to measure lighting and then Digital Thermometer which functions to measure temperature at the observation point in the laboratory. Data collection starting at 07.00 until 12.00 and in the afternoon starting from 13.00 to 16.00, which is the time to do work activities. Measurements made at ten observation points the results showed that; (1) thermal comfort (temperature) with a value of 30.44 degrees Celsius, while the ideal practical standard ranges from 24 ? 27 degrees Celsius; (2) Lighting with a value of 422.14 Lux while the ideal practice standard ranges from 500 ? 1000 Lux. These results indicate that there is a tendency for temperature and lighting in laboratory rooms under conditions that are less than the standard set. To increase work productivity, these factors can cause less concentration and stress at work.
Comfort Temperature and Lighting Intensity: Ergonomics of Laboratory Room Machine Tools Idkhan, A. Muhammad; Baharuddin, Fiskia Rera
International Journal of Environment, Engineering & Education Vol 1 No 2 (2019)
Publisher : Three E Science Institute

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5281/zenodo.3477838

Abstract

Laboratories that meet ergonomic standards will support the learning process, both academically and technically, to facilitate the growth and development of skills. This study aims to uncover and provide an overview and information about laboratory ergonomics standards which include thermal comfort (temperature), workspace laboratory lighting. This study uses a quantitative approach with a survey method carried out in the Machine Tool Unit Laboratory of the Department of Mechanical Engineering Education with a population of 60 students who are carrying out practicum. Techniques using direct observation and measurement. Lux Meter to measure lighting and then Digital Thermometer which functions to measure temperature at the observation point in the laboratory. Data collection starting at 07.00 until 12.00 and in the afternoon starting from 13.00 to 16.00, which is the time to do work activities. Measurements made at ten observation points the results showed that; (1) thermal comfort (temperature) with a value of 30.44 degrees Celsius, while the ideal practical standard ranges from 24 – 27 degrees Celsius; (2) Lighting with a value of 422.14 Lux while the ideal practice standard ranges from 500 – 1000 Lux. These results indicate that there is a tendency for temperature and lighting in laboratory rooms under conditions that are less than the standard set. To increase work productivity, these factors can cause less concentration and stress at work.
ANALISIS PENGARUH MASA KERJA DAN SERTIFIKASI TERHADAP KOMPETENSI DAN KINERJA GURU PRODUKTIF SMK NEGERI DI KOTA KENDARI Devitha, Celia Tri Pristya; Baharuddin, Fiskia Rera; Purnamawati, Purnamawati
JURNAL NALAR PENDIDIKAN Vol 9, No 1 (2021): JURNAL NALAR PENDIDIKAN
Publisher : Lembaga Penelitian Mahasiswa Penalaran UNM

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26858/jnp.v9i1.20633

Abstract

Penelitian ini bertujuan untuk mendeskripsikan pengaruh langsung dan tidak langsung masa kerja dan sertifikasi terhadap kompetensi dan kinerja guru produktif pada SMK Negeri di Kota Kendari. Penelitian menggunakan metode kuantitatif dengan analisis statistik serta analisis jalur untuk menjawab hipotesis. Populasi dalam penelitian ini berjumlah 208 orang dan sampel penelitian berjumlah 123 orang guru produktif yang ditentukan menggunakan teknik purposive sampling dengan kriteria yang telah ditentukan. Hasil penelitian menunjukkan: 1) tidak terdapat pengaruh signifikan masa kerja terhadap kompetensi guru (Sig. 0,476>0,05); 2) tidak terdapat pengaruh signifikan sertifikasi terhadap kompetensi guru (Sig. 0,264>0,05); 3) tidak terdapat pengaruh signifikan masa kerja terhadap kinerja guru (Sig. 2,40>0,05); 4) terdapat pengaruh signifikan sertifikasi terhadap kinerja guru (Sig. 0,001<0,05); 5) terdapat pengaruh signifikan kompetensi terhadap kinerja guru (Sig. 0,000<0,05); 6) tidak terdapat pengaruh signifikan masa kerja terhadap kinerja guru melalui kompetensi sebagai variabel intervening (β:0,137); dan 7) tidak terdapat pengaruh signifikan sertifikasi terhadap kinerja guru melalui kompetensi sebagai variabel intervening (β:0,117). Rekomendasi yang dapat diberikan kepada guru produktif pada SMK Negeri di Kota Kendari agar dapat terus meningkatkan kompetensi khususnya dalam pemanfaatan media pembelajaran, serta dapat terus memperbaharui ilmu pengetahuan dan keterampilan sesuai perkembangan teknologi.
Crystal Structure and Morphology Analysis of Nd1+xBa2−xCu3O7 Oxide Alloy Surface Developed by Solid State Reaction Method Eko Hadi Sujiono; Husain Ahmad; Fiskia Rera; Samnur Samnur
Jurnal Fisika dan Aplikasinya Vol 7, No 1 (2011)
Publisher : Lembaga Penelitian dan Pengabdian Kepada Masyarakat, LPPM-ITS

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (210.679 KB) | DOI: 10.12962/j24604682.v7i1.893

Abstract

This research has successfully prepared Nd1+xBa2−xCu3O7 oxide alloy which was developed using solid state reaction method with varying molar ratio x = 0.1 to x = 0,3. The process parameter observed was various synthesis routes that were different calcinations temperatures and sintering. In order to acquire the quality of the alloy, the homogeneity of the alloy were analyzed based on the result of EDAX (Energy dispersive X-ray). The composition of the material was analyzed in every variation of synthesis. Last, the crystal and morphology ofNd1+xBa2−xCu−3O−7 oxide alloy were analyzed based on the result of XRD (x-ray Diffraction) and SEM (Scanning Electron Microscope). The XRD measurements showed that crystal NdBaCuO has been formed. From the results of SEM images also showed that the greater the molar ratio x the particle size will be smaller.
Modifikasi Alat Penjernih Air Dengan Menggunakan Sistem 4 Jenis Media Dan Filterisasi Fiskia Rera Baharuddin
Teknik Mesin "TEKNOLOGI" Vol 12, No 3 Okt (2010)
Publisher : Universitas Negeri Makassar

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Air merupakan salah satu kebutuhan yang sangat penting dalam kehidupan manuasia di muka bumi ini, dari sekian banyak manfaat air salah satu yang paling utama adalah untuk kebutuhan rumah tangga terutama untuk air minum. Namun terkadang air yang terkandung di alam banyak mengandung partikel-partikel yang dapat membahayakan pada tubuh manusia bila tidak diolah secara baik.untuk itu dibutuhkan n alat penjernih air. Tujannya untuk mendapatkan alat penjerih yang efektif, efisien dan ekonomis sertamendapatkan kualitas air yang lebih baik untuk dikomsumsi setelah dimodifikasi dengan menggunakan sistem 4 jenis media dan filterisasi. Pengujian dilakukan dengan mengambil data sebanyak tiga kali pengujian yaitu pada volume 2 liter, 4 liter dan pada volume 6 liter, dengan cara mengalirkan air dari bak penampungan memalui alat penjernih air yang menggunakan 4 jenis media yaitu pasir silika, zeolit, karbon aktif (arang)dan manganeese greensand, kemdian dilanjutkan dengan filterisasi. Dari hasil pengjian memperlihatkan bahwa kecepatan air bersifat konstan dalam volume 2 liter air dibutuhkan waktu 46,33667 detik dengan kecepatan 0,151511 m/s sampai 0,151397 m/s dan menurnkan kadar fisik, kimia dan mikrobiologi dari air sumur menjadi air layak komsumsi. Kata Kunci: Air bersih, Media dan filterisasi
Perencanaan Sistem Pendingin Gedung Perpustakaan Jurusan Teknik Mesin Fakultas Teknik Universitas Negeri Makassar Fiskia Rera Baharuddin
Teknik Mesin "TEKNOLOGI" Vol 13, No 1 Apr (2011)
Publisher : Universitas Negeri Makassar

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Untuk mendapatkan kondisi ruangan yang memenuhi thermal comfort atau juga kondisi yang harus memenuhi persyaratan tertentu sesuai dengan yang kita inginkan, tanpa adanya ketergantungan dengan lingkungan luar, maka digunakan Pengkondisian udara (Air Conditioning). Pengkondisian udara memiliki pengertian bahwa udara dalam ruang dikondisikan berdasarkan beban kalor yang terjadi pada ruangan tersebut. Penelitian ini bertujuan mengetahui besarnya beban pendingin guna menentukan daya AC yang akan dipasang pada ruang Perpustakaan Jurusan Teknik Mesin Fakultas Teknik Universitas Negeri Makassar. Berdasarkan hasil perhitungan beban pendingin diperoleh nilai rata-rata total beban pendingin tiap hari pada perpustakaan sebesar 2716,3 W atau 2,7163 kW. Jadi sebenarnya perlu dipasang 2 buah AC masing-masing 1 buah untuk AC 1 PK dan 1 buah untuk AC ½ PK untuk setiap AC. Kata kunci : Sistem Pendingin, Beban Kalor