Claim Missing Document
Check
Articles

Analisis Potensi Matahari dan Angin menggunakan Reanalysis Dataset ECMWF dan NASA POWER di Pulau Teupah Lisman Lisman; Ira Devi Sara; Tarmizi Tarmizi
DIELEKTRIKA Vol 10 No 2 (2023): DIELEKTRIKA
Publisher : Jurusan Teknik Elektro Fakultas Teknik Universitas Mataram

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29303/dielektrika.v10i2.337

Abstract

Analisis potensi energi terbarukan banyak menggunakan dataset dari sumber sekunder seperti Solargis, ECMWF, NASA, dan Meteonorm karena dapat memberikan informasi yang relevan dan konsisten dalam jangka panjang sampai puluhan tahun. Penelitian ini membandingkan potensi energi matahari dan angin menggunakan reanalysis dataset ECMWF dan NASA POWER di Pulau Teupah dalam skala jam dari tahun 2012 sampai 2021. Metode analisis yang digunakan adalah kuantitatif dan deskriptif. Hasilnya, potensi energi matahari dan angin untuk dataset ECMWF lebih besar dibandingkan dataset NASA POWER. Namun secara karakteristik potensi energi matahari dan angin baik perhari dan perbulan untuk dataset ECMWF dan dataset NASA POWER tidak berbeda secara signifikan. Potensi energi matahari di Pulau Teupah lebih direkomendasikan untuk dikembangkan sebagai pembangkit energi terbarukan daripada potensi energi angin pada ketinggian kurang dari 50 Meter.
Disign SPWM multilevel inverter single phase15 level Effendi Effendi; Ira Devi Sara; Rakhmad Syafutra Lubis
Jurnal Rekayasa Elektrika Vol 12, No 2 (2016)
Publisher : Universitas Syiah Kuala

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17529/jre.v12i2.3966

Abstract

Fifteen level single phase multilevel inverter is constructed using power circuit consist of 7 MOSFETs, seven independents DC sources, seven diodes, and an H-Bridge circuit. Switching method used in this MLI is sinusoidal pulse width modulation (SPWM) multicarrier where the reference wave in the form of a sinusoidal wave.  Multicarrier SPWM circuit is designed using electronic components such as Op-Amp that used as a comparator and some logic gates such as AND, OR and NOT gate to trigger S1, S2, S3, S4, S5, S6, S7, and H-Bridge circuit. Carrier waves used in this MLI modified from the triangle wave that having a frequency into carrier waves without frequency (DC sources) where THD that generated into 5.502%. While methods that use frequency such as Phase Disposition PWM (PD PWM), Phase Shift PWM (PS-PWM), and Carrier Overlapping PWM (CO PWM) that produces THD greater than the proposed method, this system was simulated using PSIM software. 
Studi Kasus Kelayakan Penerapan Sistem Hybrid Building Applied Photovoltaics (BAPV)-PLN pada Atap Gedung Politeknik Aceh Rachmad Ikhsan; Ira Devi Sara; Rakhmad Syafutra Lubis
Jurnal Rekayasa Elektrika Vol 13, No 1 (2017)
Publisher : Universitas Syiah Kuala

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17529/jre.v13i1.6071

Abstract

With the undeveloped BAPV(Building Applied Photovoltaics) at Office Building and Public Facilities, Caused the high price of solar modules and the lack the economic study on the use of solar modules that housed in the Banda Aceh region. Furthermore, the price of solar modules is expensive, so people think it will cost so much funds to building a BAPV’s system. These problems could be overcomed if the existing technical studies and economic studies of the application of the BAPV’s system. This study aims to assess the application of the BAPV’s system on institutions  building in terms of technical and economic value, in this case the building that is used as the study object is the Polytechnic Aceh’s Building. The method that used in the technical studies are theoretical calculations and simulations using helioscope software, while the methods used for economic studies is using the methods of cost-benefit analysis (cost benefit analysis). The method used to find the NPV (Net Present Value), PP (Payback Period), IRR (Internal Rate of Return), and BCR (Benefit Cost Ratio). If the average value of solar radiation reaching 4.79 kWh / m2 / day and the average daily energy requirement is 592 kWh, the energy generated from BAPV-PLN hybrid system on the roof of the object building will reach the amount of 237 MWh/year with the capacity charge controller used is 7490 A and the capacity of the battery used is 64.487 Ah. Panel tilt angle used is 25o and the type of panel used is Monocrystalline manifold. From the economic value will obtained NPV value of Rp. 20.022.106.937, PP during 5,2 years, IRR of 36% and 3,49 of BCR. Based on the evaluation results of the feasibility study, the project of hybrid BAPV-PLN’s system on the roof of the Polytechnic  Aceh’s  building can be realized, because its already meet the criteria of the feasibility study to make the systems get established in real term.
Kajian Aspek Kecepatan dan Ketepatan pada Sun Tracker Dua Sumbu Berbasis Sensor Berbentuk Tetrahedron Saddam Azmi; Yuwaldi Away; Ira Devi Sara
Jurnal Rekayasa Elektrika Vol 15, No 2 (2019)
Publisher : Universitas Syiah Kuala

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17529/jre.v15i2.13546

Abstract

The two-axis Sun tracker with the tetrahedron geometry that has been developed has an error percentage of 31.26% and a speed of 0.063 m/s. The value of the accuracy and speed is still considered low for tracking sunlight in open space conditions. The research aims to improve the accuracy and speed of the tetrahedron tracker sun. The method used to obtain tracking accuracy is to implement a control system that forms a tracking system using the proportional integral derivative (PID) control and modifies the sun's light by adding a sun tracker and laser to the top of the tetrahedron structure. In addition, the motor used to measure the state of the horizontal and vertical axes is the DC Stepper type. The results obtained indicate the level of accuracy of the modified sun tracker system is 0.650 on the X-axis and 0.540 on the Y-axis with a speed of 0.091 m / s. From these results, it can be concluded that the sun tracker modification is able to track sunlight properly with an average tracking error rate of 0.78% on the X-axis and 4.67% on the Y axis.
Performa Konfigurasi Modul Surya Seri dan Seri Paralel pada Kondisi Mismatch Karakteristik Arus-Tegangan (I-V) terhadap Daya Output Nurlaila Amna; Ira Devi Sara; Tarmizi Tarmizi
Jurnal Rekayasa Elektrika Vol 17, No 4 (2021)
Publisher : Universitas Syiah Kuala

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17529/jre.v17i4.22467

Abstract

The installation of a Solar Power System (PLTS) within the ideal conditions still uses the type of solar module with the same current and voltage characteristics. However, these ideal conditions can be different if the commonly used modules are no longer available on the market. Once there is damage or interference in the operating system, such as cracks in the module plate, it will take a significantly long time to replace. This particular condition can obstruct electrical power distribution to its intended loads in the other end. Therefore, creating a robust solar panel system that operates at its maximum capacity requires an alternative or approach to find such a similar module replacement. It is expected that the replacement module will have the I-V characteristics, which relatively resemble that of the earlier module and can help to maintain the energy availability of the solar panel system. This study aims to analyze which factors affect the characteristic irregularity of currents and voltages in a solar panel installation towards the output of a solar panel under certain conditions. The solar panel system is designed using 20 solar modules with each capacity is 250 WP power that is simulated with Simulink. The method creates the mismatch condition of the current and voltage on the solar module in a specific panel configuration. These mismatch conditions are created by combining solar modules with different currents and voltages in the Series (S) and Series-Parallel (SP) configurations. The simulation is carried out by replacing the main solar module with a 5% to 100% replacement solar module. The selection of the replacement module is based on Isc, which is close to the same because the current flowing in the series circuit is the same. The simulation results showed that the solar panel system still functioned properly and produced maximum power under mismatch conditions. Of all three configurations with mismatch conditions, it is found that the best performing configuration works with the Series-Parallel (SP) configuration of the STC conditions. The maximum power which can be sustained with Series-Parallel (SP) configuration reaches up to 40% of the original modules.
Metode Maximum Power Point Tracking (MPPT) dan Boost Converter Menggunakan Fuzzy Logic Controller (FLC) pada Modul Surya Teuku Murisal Asyadi; Ira Devi Sara; Suriadi Suriadi
Jurnal Rekayasa Elektrika Vol 17, No 1 (2021)
Publisher : Universitas Syiah Kuala

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17529/jre.v17i1.17863

Abstract

Solar modules have current and voltage characteristics that are non-linear, so efforts must always be made to work at the maximum power point so that no energy is wasted. The characteristics of the solar module will change depending on the level of radiation and temperature which causes the output power of the solar module to fluctuate and become unstable. To reduce oscillations in the output power of the solar module, the Fuzzy Logic Control (FLC) method used using the boost converter. Several studies have been done to maximize the output power of solar panels, one of which is by using namely by using Maximum Power Point Tracking (MPPT). This study aims to obtain the maximum power point in a set of solar modules arranged in series and parallel through the performance of the FLC method. In tracking the maximum power point during normal operation, the fuzzy method works together with a boost converter. Fuzzy-based MPPT was tested on a solar module under several radiation and temperature conditions using Matlab / Simulink software. The Fuzzy design method shows better results compared to other methods. The results obtained show the advantages of the FLC method in terms settling time, power loss, and oscillation at the point of the operating system.
Simulasi Pelacakan Titik Daya Maksimum Modul Surya dengan Metode Grey Wolf Optimization Rizki Faulianur; Ira Devi Sara; Fitri Arnia
Jurnal Rekayasa Elektrika Vol 14, No 1 (2018)
Publisher : Universitas Syiah Kuala

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17529/jre.v14i1.8973

Abstract

The photovoltaic module has a nonlinear current and voltage characteristic curve where there is a maximum power point to be tracked to avoid wasted energy. Some methods for tracking the maximum power points have been developed such as perturb and observe (P O), Incremental Conductance (IC), and Hill Climbing (HC). However, those methods were not so accurate to find the maximum power point and they were also slow to respond the changes in solar radiation and temperature. To overcome the shortcomings of the method, a new optimization approach was developed. This method is called Gray Wolf Optimization (GWO). It work based on the wolf behavior in capturing the prey. In this study, it will be determined to what extent the GWO method can track the maximum working point of solar modules that undergo changes in radiation and working temperature quickly and accurately. This research was conducted by simulation using Matlab/Simulink by comparing the extract of power GWO method with its power characteristics. The results obtained by the GWO method trace maximum power with an average accuracy rate of 99.14 % with time less than 0.1 second. From this data, it can be concluded that the GWO method successfully responds well and accurately to changes in radiation and temperature.
Pemantauan Parameter Panel Surya Berbasis Arduino secara Real Time Muhammad Rizal Fachri; Ira Devi Sara; Yuwaldi Away
Jurnal Rekayasa Elektrika Vol 11, No 4 (2015)
Publisher : Universitas Syiah Kuala

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17529/jre.v11i3.2356

Abstract

Monitoring the output parameters of a solar module is required for assessing its performance under real operating conditions. This paper presents a new technique for monitoring the output parameters i.e. current and voltage of solar module directly under real operating conditions. In this new monitoring technique, the output parameters of a solar module can be directly processed in real time condition and their results are displayed in a graph. The monitoring system is developed using microprocessor Arduino Atmega 328P and equipped with calibrated current and voltage sensors, a data acquisition system which is integrated directly into an Excel spreadsheet using the PLX-DAQ application program and a memory card for backup. The monitoring system is connected to a computer using a RS232 serial port. The collected data is saved directly into a spreadsheet and plotted in real time. This technique provides an easy access to the collected data for further analysis.
Performance Comparison Between LDR and Phototransistor Sensor for Dual-Axis Sun Tracker Sensor Based on Tetrahedron Geometry Hari Anna Lastya; Yuwaldi Away; Tarmizi Tarmizi; Ira Devi Sara; M Ikhsan; Ulya Zikra; Nikmal Maula Mirda
Proceeding of International Conference on Information Science and Technology Innovation (ICoSTEC) Vol. 2 No. 1 (2023): Proceeding of International Conference on Information Science and Technology In
Publisher : Universitas Respati Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35842/icostec.v2i1.45

Abstract

Solar energy is optimally obtained by solar cells when the solar cells are perpendicular to the sun's position, so a sun tracker is needed to track the sun precisely. This research compares the electrical power used in two system dual-axis sun trackers with a tetrahedron geometry that uses an LDR sensor with a phototransistor sensor. The two sun trackers are built identically and the experimental data with the servo movement and the solar cell load are carried out side by side. The servo motor controls with Proportional Integral Derivative (PID) algorithm controls the movement of the dual-axis sun tracker. Data were obtained by recording the voltage and current received by the solar cells installed on the two sun trackers and comparing the results. The results showed that the phototransistor sensor performs better than the LDR sensor. This can be seen from the amount of power generated by the phototransistor sensor which is more than the power generated by the LDR sensor on the solar cell. The solar energy received by sun tracker uses a phototransistor sensor average 40% more than sun tracker uses an LDR sensor
Penerapan Aplikasi Administrasi Microsoft Office Pada Para Operator Pendidikan Anak Usia Dini (PAUD) di Kecamatan Syiah Kuala Kota Banda Aceh Zainuddin; Saiful; Masri; T. Edisah Putra; M. Nizar Machmud; Suhaeri; Akhyar; Suriadi; Ira Devi Sara; Nurul Malahayati
Kawanad : Jurnal Pengabdian kepada Masyarakat Vol. 2 No. 2 (2023): October
Publisher : Yayasan Kawanad

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56347/kjpkm.v2i2.171

Abstract

Early childhood education (PAUD) is very important to prepare an educated generation for the nation and state, and the role of early childhood educators (PAUD) is very important in the development of students. Educators need to go beyond traditional learning by providing learning innovations that utilize information technology, including the ability to master the latest information technology. The focus of the Community Service Program (PKM) is to improve   the quality of human resources (HR) of PAUD organizers in Syiah Kuala District, Banda Aceh Province in the field of information technology, so that they are able to support the management of learning and educational activities. In improving the quality of kindergarten teaching staff in the field of information technology is related to supervision management and making daily learning implementation plans (RPPH). With a system that allows teachers to quickly resolve administrative problems, it is hoped that they can use their time to further develop their knowledge and skills regarding PAUD administrative problems.
Co-Authors . Roslidar Aede Hatib Mustaamal Ahmad Surkani Ahmad Syuhada Akhyar Akhyar Alfizar Alfizar Alifa Annisa Amru Amir Zaki Mubarak Amna, Nurlaila Andi Julisman Andri Andri Aqsa SH, Aidil Ardiansyah Dian Lubis Aripriharta - Arnawan Hasibuan Asran Asran Asri Asri Asri Asyadi, Teuku Murisal Aulia Syahbanna Anhar Basyir, M. Budi Amri Cholis Cholis Cut Nurmuthaharah Doni Gunawan Effendi Effendi Ezwarsyah Ezwarsyah Fariz Mashuri Fikrel Jasman Fitri Arnia Gunawan, Doni Hafidh Hafidh Hafidh Hasan Hari Anna Lastya Hudal Mirrahman Husaini Husaini Irma Anggraini Jalil, Asri Muhammad Khairul Azmi khairul umurani Laina Hilma Sari Lisman Lisman Lubis, Rakhmad Syafutra M Ikhsan M. Darianzhah Putra M. Nizar Machmud M. Nizar Machmud Mahdi Syukri Mansur Gapy Masri Masri Maulana, Edi Mega Fatimah Rosana Mitra Walidain Muhajir Muhammad Aden Fahadi Muhammad Bahi Muhammad Irhamsyah Muhammad Rizal Fachri Muhammad Shabri Abd. Madjid Muhammad Yusuf Muhibbuddin Nasaruddin Nasaruddin Nikmal Maula Mirda Nor Julia Mohd Nordin Nor Shahida Hasan Norzanah Rosmin Novandri, Andri Novita Novita Nurul Malahayati Putra, T. Edisah Rachmad Ikhsan Rakhmad Syafutra Lubis Rakhmad Syafutra Lubis Rakhmad Syafutra Lubis Rakhmad Syafutra Lubis Ramdhan Halid Siregar Rika Sri Rizki Rizal Munadi Rizki Faulianur S.Pd. M Kes I Ketut Sudiana . Saddam Azmi Saifuddin Muhammad Jalil Saiful Saiful Siti Maherah Husin Sofyan Arianto Suhaeri Suhaeri Sura Eka Pratama Pagan Suriadi Suriadi Suriadi Suriadi Suriadi Suriadi Syahrizal Syahrizal Syahrizal Syaukani Syaukani Syukriyadin Syukriyadin Syukriyadin Syukriyadin, Syukriyadin T Yasar Yulis T. Edisah Putra T. Mizan Sya’rani D Tarmizi Tarmizi Tarmizi Tarmizi Tarmizi Tarmizi Tarmizi Tarmizi Tarmizi Tarmizi Teuku Mirzan Syahputra Ulya Zikra Umurani, Khairul Wahyu Priyanto Wahyu Priyanto Yulizar Yulizar Yusuf, Muhammad Yuwaldi Away Zainuddin Zainuddin Zakwansyah Zian Iqtimal Zikra Latasya Zoel Fachri