Claim Missing Document
Check
Articles

Found 30 Documents
Search

Analysis Of Protein Levels Using The Magot Bsf Uv-Vis Spectrophotometry Method Based On Different Food Media Samsul Hadi; Nastiti, Kunti; Qadry Sukmana, M. Laily
JURAGAN - Jurnal Agroteknologi Vol. 2 No. 1 (2024)
Publisher : Yayasan Rahmatan Fiddunya Wal Akhirah

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58794/juragan.v2i1.637

Abstract

Maggot termasuk dalam serangga decomposer yang mampu mengolah material organik. Dalam mengolah material organik maggot tidak memilih makanan yang dikehendaki akan tetapi maggot dipaksa memakan media yang di berikan yang berakhibat kandungan protein dari magot itu. Sehingga tujuan dari penelitian ini adalah mengetahui kandungan protein magot berdasarkan perbedaan media makan maggot. Metode yang digunakan dalam penelitian ini adalah perbedaan media makan maggot yaitu sampah daun daunan, buah buahan , hewan dan rumah tangga. Analasis hasil yang digunakan adalah penepatan kadar protein maggot dengan metode lowry secara spektrofotometri. Hasil dari penelitain ini diperoleh persaman kurva baku Y: 0.009X + 0.0217 dengan nilai R2 adalah 0.9892. Kadar protein maggot dari dengan media sampah daun daunan (29 % ), buah buahan (35% ), hewan ( 43%), rumah tangga (239% ). Kesimpulannya Dari penelitian ini dapat disimpulkan penggunaan media hewan mempunyai kandungan protein tertinggi disusul oleh sampah rumah tangga.
Determination of Protein Content Protein from various growing places of Pineapple (Ananas comosus Merr.) komari, Noer; Rahmadi, Adi; Samsul Hadi
JURAGAN - Jurnal Agroteknologi Vol. 2 No. 1 (2024)
Publisher : Yayasan Rahmatan Fiddunya Wal Akhirah

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58794/juragan.v2i1.828

Abstract

Pineapple is a special plant that has a sweet and sour taste and has various benefits. Based on where the pineapple grows, the taste will vary. The aim of this research is to determine the protein content of pineapple based on where it grows. This research method is to determine Lowry protein levels using spectrophotometry. The results of this research were measurements of protein levels in peat areas, the protein concentration was 48.14 µg/mL. After conversion by dilution, the volume used resulted in a sample weight of 0.019 grams. When converted to a sampling weight of 80 grams, the sample weight in percent is 0.024%. Meanwhile, when measuring in a mountainous environment, a level of 40.99 µg/mL was obtained, this is equivalent to a sample weight of 0.016 grams, when divided by the sampling weight of 80 grams, a level of 0.021% w/w was obtained. When sampling was carried out in the lowlands, the protein level obtained was 45.39 µg/mL. So the protein obtained is 0.018 grams, when you calculate the % weight per weight you get a level of 0.022%. The conclusion of this research is that the highest protein content is pineapple that grows in a peat environment.
Strategi Badan Permusyawaratan Desa (BPD) dalam Pengawasan Tata Kelola Pemerintahan di Desa Sepit Kecamatan Keruak Kabupaten Lombok Timur Samsul Hadi; Muh. Wahyunadi; Hairul Izwan; Alwi Sahri Ramadhani
Al-Faizi : Politik, Hukum dan Bisnis Vol. 2 No. 2 (2024): NOVEMBER
Publisher : Lembaga Al-Gafari

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Villages are the seeds of the formation of a country, not only in Indonesia but throughout the country. But ironically, the development of rural areas in Indonesia is always marginalized, public services at the village level are the worst level of service among public services in Indonesia. The purpose of this study is to 1) find out the planning of BPD in supervising governance in Sepit village, 2) find out how the implementation of BPD strategy in supervising governance in Sepit village, and 3) find out how the obstacles of BPD in supervising governance in Sepit village. This study highlights the importance of a strong understanding of the roles and responsibilities of BPD in supervision. In addition, an effective strategy requires an efficient understanding of resources, independence from political interference, increased access to information, and the development of networks and cooperation. By implementing these strategies, BPD can strengthen its role in improving transparency, accountability, and quality of governance at the village level. The implications of this study can provide practical guidance for BPD and related parties in strengthening the supervision mechanism at the village level.
Pendampingan Penyusunan Jurnal, Buku Besar, Dan Laporan Keuangan Pada Kelompok Tani Pe Belek Selaparang Abdurrahim; Samsul Hadi
Indonesia Vol 2 No 1 (2024): FEBRUARI
Publisher : Jurnal Lembaga Pendidikan Al-Gafari

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The Pe Belek Selaparang Farmer Group in Selaparang District, East Lombok, faces challenges in financial management due to low financial literacy and manual accounting practices. This study aims to provide assistance in the preparation of journals, general ledgers, and financial reports for the farmer group. The method used is a qualitative approach, with interviews, observations, and direct training for 50 group members. The results show that this assistance successfully improved the group’s financial management skills, transparency, and accountability. Additionally, social change emerged with the rise of local leaders who are better prepared to manage finances. In conclusion, the program has successfully enhanced the financial literacy of the farmer group and improved their financial management.
Pelatihan Pengelolaan Sampah Plastik Menjadi Produk Kreatif Bernilai Ekonomis Di Desa Senyiur Abdurrahim; Samsul Hadi
Indonesia Vol 1 No 1 (2023): DESEMBER
Publisher : Jurnal Lembaga Pendidikan Al-Gafari

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Plastic waste management in Senyiur Village faces significant challenges, particularly due to limited knowledge and inadequate facilities. This study aims to educate the community on plastic waste processing through circular economy-based training. The methodology involves active participation from housewives and local youth in technical training, such as waste sorting, converting waste into creative products, and understanding marketing. Data were collected through direct observation and interviews, with qualitative data analysis. The results show an increase in community skills in processing plastic waste, the formation of a waste management community, and enhanced environmental awareness. Furthermore, the training successfully created new business opportunities, contributing to household economic improvement. In conclusion, community-based and active participation approaches have proven effective in addressing environmental issues while improving economic welfare in Senyiur Village, and can serve as a model for other villages facing similar challenges.
PENGARUH VARIASI KECEPATAN PEMOTONGAN DAN TEKANAN OKSIGEN MESIN FIBER LASER CUTTING TERHADAP KEKASARAN PERMUKAAN DARI MATERIAL STAINLESS STEEL 304: EFFECT VARIATION CUTTING SPEED AND OXYGEN PRESSURE OF FIBER LASER CUTTING MACHINE ON SURFACE ROUGHNESS OF 304 STAINLESS STEEL MATERIAL Mohammad Rudi Romadhoni; Samsul Hadi
Jurnal Teknik Mesin Vol. 3 No. 2 (2024): JURNAL TEKNIK MESIN
Publisher : Program Studi Teknik Mesin PSDKU Polinema Kediri

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33795/j-meeg.v3i2.5713

Abstract

Industrial development in Indonesia is currently taking place very rapidly, one of the industrial sectors that has an important role in increasing Indonesia's development is the manufacturing industry. Pahala Workshop is a service workshop engaged in the manufacturing industry that offers plate cutting services using a fiber laser cutting machine. The fiber laser cutting machine in Pahala Workshop is quite new and is starting to be in demand by many customers. For different types of materials, there are different cutting standards and parameters. The purpose of the study was to determine the effect of variations in cutting speed and oxygen pressure of fiber laser cutting machines on the surface roughness of 304 stainless steel material so as to determine the optimal parameters for the cutting process. The research method used a real experiment method with the independent variables of cutting speed (1400, 1700 and 2000 mm/min) and oxygen pressure (3, 4, 5, 6 and 7 Bar) and the dependent variable of surface roughness. The results showed that the lowest average value of surface roughness (Ra) of 5.087 µm was obtained at a cutting speed of 1400 mm/min and oxygen pressure of 7 Bar. While the highest average value of surface roughness (Ra) is 8.604 µm obtained at a cutting speed of 2000 mm/min and oxygen pressure of 3 Bar. Cutting speed and oxygen pressure affect surface roughness. The effect of cutting speed on the surface roughness value is that the faster the cutting speed, the shorter the cutting time so that the laser heat energy that hits the work plane area is not maximized. While the effect of auxiliary gas pressure (oxygen) on fiber laser cutting machine that hits the work plane area is getting uneven as the cutting speed increases.
Relevansi Museum Asi Mbojo sebagai Sumber Belajar PPKn di SMP Rizka Amelia Putri; Yuliatin; Samsul Hadi; Muh Zubair
JPG: Jurnal Pendidikan Guru Vol. 6 No. 1 (2025): JPG: Jurnal Pendidikan Guru
Publisher : Fakultas Keguruan dan Ilmu Pendidikan, Universitas Ibn Khaldun Bogor

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32832/jpg.v6i1.18127

Abstract

Museum memiliki peran penting pada bidang pendidikan dalam hal pembelajaran yang dapat diimplementasikan diberbagai tingkat pendidikan. Selain sebagai sumber belajar juga dapat menjadi media pembelajaran. Sehingga penelitian ini bertujuan untuk mengetahui bagaimana relevansi museum asi mbojo sebagai sumber belajar PPKn di SM. Pendekatan dalam penelitian ini menggunakan pendekatan kualitatif dengan jenis penelitian deskriptif. Adapun yang menjadi data penelitian ini yaitu relevansi museum asi mbojo sebagai sumber belajar PPKn di SMP. Data tersebut diperoleh dengan menggunakan metode penggumpulan data observasi, wawancara dan dokumentasi. Analisis data yang digunakan dalam penelitian ini yaitu reduksi data, penyajian data dan penarikan kesimpulan. Berdasarkan hasil penelitian ini, ditemukan beberapa hal yang relevan untuk digunakan sebagai sumber belajar pada materi PPKn yang terdiri dari, benda-benda peninggalan sejarah, kesenian lokal budaya dan narasi-narasi peninggalan sejarah. Bentuk kearifan lokal tersebut memiliki relevansi dengan materi PPKn dan dijadikan sebagai sumber belajar sehingga dapat membantu peserta didik untuk mengaktualisasikan dirinya dalam kehidupan sehari-hari guna memperoleh pembelajaran yang bermakna dan berkesan. Keyword : Museum, Sumber Belajar, PPKn
Pengaruh Katalis Pelat Tembaga Untuk Mengurangi Emisi Karbon Monoksida (CO) dan Hidrokarbon (HC) Pada Kendaraan Roda Dua Irzan Pujiriansyah; Samsul Hadi
Journal of Creative Student Research Vol. 2 No. 4 (2024): Agustus : Journal of Creative Student Research
Publisher : Pusat Riset dan Inovasi Nasional

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55606/jcsr-politama.v2i4.4031

Abstract

With increasing public awareness of environmental pollution, especially air pollution, especially CO and HC, the public's interest in reducing the rate of pollution is increasing. Therefore, the aim of this research is to find breakthroughs to help reduce air pollution by using cheap materials. This research is experimental research or experimental research. Research was carried out on trials of making a catalyst from copper material shaped like a wasp's nest. The copper plate is cut to size and folded like a wasp's nest. Data is taken from the nominal numbers printed on the Gas Analyzer monitor, by directly recording each engine rotation starting from idle, 1000, 2000, 2500 and 3500 rpm. The fuel used in this test uses pertalite and Pertamax as a comparison. The engine used has a capacity of 125cc. In this research, the material used was copper plate with a thickness of 0.9mm with a distance between fins of 4mm. The variations in catalytic length are 70mm, 90mm and 110mm. The catalytic shroud uses a standard 2009 Supra-X 125cc exhaust that has been modified internally to make room for the copper plate catalyst. The results taken from this research are the reduction in CO and HC levels in two-wheeled vehicles with an engine capacity of 125cc using a catalyst with a length of 110mm, where this reduction is 70% for CO and 24% for HC, respectively. Meanwhile, the lowest is using a catalyst with a length variation of 70mm with a yield of 8% for CO and 6% for HC.
Identifikasi Profil Gaya Pembelajaran Siswa SMP Islam Jabal Hikmah Samsul Hadi; Mashar
EDUPEDIKA: Jurnal Studi Pendidikan dan Pembelajaran Vol. 2 No. 1 (2023): Februari 2023
Publisher : PELITA NUSA TENGGARA

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Abstrak: Gaya belajar merupakan cara seseorang dalam menerima dan memproses informasi sesuai dengan kemampuannya. Keberhasilan belajar siswa atau tercapainya tujuan pembelajaran yang dikehendaki dipengaruhi oleh gaya belajar siswa. Sehingga evaluasi atau asesmen awal tentang profil gaya belajar siswa sangatlah penting. Penelitian ini betujuan untuk mengetahui gambaran tentang profil belajar siswa khususnya gaya belajar siswa. Penelitian ini merupakan langkah awal yang menjadi bagian asesmen awal khususnya untuk merancang pembelajaran berdiferensiasi guna memenuhi kebutuhan belajar murid. Penelitian ini merupakan penelitian deskriptif kualitatif dengan menggunakan pendekatan observasi dan penyebaran angket. Hasil penelitia menunjukkan kecenderungan gaya belajar visual dengan persentase 67%, gaya belajar auditori 22% dan kinestetik 11% dari total 27 orang siswa. Abstract: Learning style is a person's way of receiving and processing information according to his abilities. The success of student learning or the achievement of learning objectives is determined by the student's learning style. So the initial evaluation or assessment of the student's learning style profile is very important. This study aims to find out the descriptions of student learning profiles, especially student learning styles. This research is the first step, which is part of the initial assessment, especially for designing differentiation learning to meet students' learning needs. This research is a qualitative descriptive study using the observation approach and angle distribution. The results showed a tendency for visual learning styles with a proportion of 67%, auditory learning styles with 22%, and kinesthetic learning styles with 11% of a total of 27 students.
The Teaching and Learning on Speaking Skill: A Case Study at Seventh Grade VII F Students of SMPN 1 Kebonagung Pacitan Samsul Hadi
Jurnal Penelitian Pendidikan Vol 7 No 2 (2015): Jurnal Penelitian Pendidikan
Publisher : LPPM Press

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

This qualitative research was carried out in the classroom VII F of SMPN 1 KebonagungPacitan, on JLS Street Kebonagung Pacitan. The research was carried out at the firstsemester of the academic year of 2012/2013. Further, the techniques used to collectthe data were: (1) observation; (2) in-dept interview; (3) recording documents; (4)and then the data were documented. The data analysis was through seven steps thosewere: (1) observation; (2) textualisation; (3) multicolumn text; (4) segmentization; (5)thematization; (6) proposisionalization; (7) and reduction. The units of main data wereanalyzed by researcher through five steps which consisted of: being analyzed, beinginterpreted, being summarized, being concluded, and being recommended. Based on theresult on the observation in the activity of the teaching and learning speaking skill, itwas obtained 112 statements of data identities. In relation with the topic, some of thestatements of data identities were relevant but some others were not, the irrelevant datawere not discussed in this chapter (they were reduced), while the relevant data becameunits of main data analyzed based on the underlying theories and the result of interviews,as well as the related documents. The results and discussions include: (1) aspects oflearning done by the teachers including: methods were more atractive teacher-centeredand students-centered, teaching and giving instruction, teachers stood in front, thematerial presented was appropiate to the topic; (2) aspect of the students, among otherswere enthusiastic but tended to be crowded.