Claim Missing Document
Check
Articles

Advancement and Maintenance of Infant Incubator in Medokan Ayu Health Centre Surabaya for Effort to Kepp Continuity of Serive Syaifudin, Syaifudin; Kholiq, Abdul; Lamidi, Lamidi
Frontiers in Community Service and Empowerment Vol. 2 No. 3 (2023): September
Publisher : Forum Ilmiah Teknologi dan Ilmu Kesehatan (FORITIKES)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35882/ficse.v2i3.43

Abstract

Health Development is a leading program among 45 important programs that must be carriedout throughout the country related to sectoral and regional development, where the health program is in 12thplace. Health programs in the city of Surabaya are carried out through puskesmas. One of the servicesavailable at the Medokan Ayu Health Center (PKM) is interchangeable rooms. At the Medokan AyuSurabaya Health Center, there is also a delivery room, as well as infant incubator equipment for babies bornprematurely. Baby incubator makes the percentage of babies born safe and the ability to survive fromhypothermia higher in premature infants. The increasing sophistication of medical devices raises questionsabout device safety and reliability of infant incubator tools, hence the importance of controlled parameterinspection in medical devices. safety inspection and performance is performed by clinical professionals. Atthe community health center for maintenance activities it is not yet reached because there are no staff tohandle it. In community service, carrying out maintenance activities for infant incubator equipment aims toensure that the infant incubator is ready and suitable for use so that services can continue. From the results ofthe activities, infant incubators have been produced which are in good condition and ready and fit for use.From the measurement results, it was found that the biggest error when the infant incubator was set at 36oCwas -0.69oC and 0.86 at 34oC
Enhancement and Maintenance of Infant Incubators at Sukodono Health Centre in Sidoarjo: Efforts to Ensure Continuity of Healthcare Services Kholiq, Abd.; Syaifudin; Lamidi
Frontiers in Community Service and Empowerment Vol. 3 No. 4 (2024): December
Publisher : Forum Ilmiah Teknologi dan Ilmu Kesehatan (FORITIKES)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35882/ficse.v3i4.81

Abstract

Health Development is a prominent program among 45 essential initiatives that must be implemented nationwide in relation to sectoral and regional development, ranking 12th among them. In Surabaya, health programs are conducted through community health centers (puskesmas). One of the services provided at the Sukodono Health Center (PKM) includes interchangeable rooms. The Sukodono Sidoarjo Health Center also features a delivery room and infant incubator equipment designed for premature infants. The use of infant incubators significantly increases the percentage of safely born babies and enhances their ability to survive hypothermia. However, the growing sophistication of medical devices raises concerns about their safety and the reliability of infant incubators, emphasizing the need for controlled parameter inspections in medical devices. Safety inspections and performance evaluations are carried out by clinical professionals. Unfortunately, maintenance activities at the community health center have not yet been addressed due to the absence of staff qualified to handle such tasks. As part of community service, maintenance activities for infant incubator equipment were conducted to ensure that the incubators are ready and suitable for use, enabling ongoing services. The results of these activities indicated that the infant incubators are in good condition and ready for use. The measurement results show that the biggest error occurred at the baby incubator temperature which was set at 35°C with an error of 0.05°C..
Pendampingan Pembuatan Laporan Keuangan Sederhana Pada Home Industri Kripik Tempe Sumber Agung, Petoran, Jebres, Surakarta Lamidi, Lamidi; Rahadhini, Marjam Desma
Indonesia Berdaya Vol 3, No 4: August-October 2022
Publisher : UKInstitute

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47679/ib.2022353

Abstract

This community service activity takes the object of the Sumber Agung home industry in Petoran, Jebres, Surakarta. The main purpose of this service is to provide training and assistance to the owners of the Sumber Agung home industry in making simple financial reports, with the hope that business management will be able to separate business finances from personal finances. So that in managing the tempeh chips business, it can be seen in real terms in running their business, because they already have financial statements, although they are still simple. The problem faced, the tempe chips business that has been involved so far, is not able to show in real terms how much profit is earned per week or per month. This fact encourages the service team to do service with training methods and assistance in making simple financial reports. The training was carried out several times to the owner, then the team was still providing assistance, so that the owner was really able to make financial reports. The training is carried out in stages, starting with the steps of preparing transaction documents, recording financial transactions, separating transactions into ledgers, making work sheets, making capital changes, making trial balances and making profit and loss statements. As a result of this training and mentoring activity, the Sumber Agung home industry is able to make simple financial reports so that business management and business development can be seen in a real and correct way according to accounting rules. The output of this service activity is an article on service activities published in the National Accredited Journal
Monitoring Baby Incubator Central through Internet of Things (IoT) based on Raspberry Pi Zero W with Personal Computer View Puspitasari, Dila Anggraeni; Irianto, Bambang Guruh; Lamidi, Lamidi; Triwiyanto, Triwiyanto
Indonesian Journal of Electronics, Electromedical Engineering, and Medical Informatics Vol. 6 No. 1 (2024): February
Publisher : Jurusan Teknik Elektromedik, Politeknik Kesehatan Kemenkes Surabaya, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35882/dk550458

Abstract

Kids born before 37 weeks of pregnancy or weighing less than 2500 grams are considered premature, whereas kids born between 38 and 40 weeks of pregnancy and between 2500 to 4000 grams are considered full-term. Given that their organ systems are still developing within the womb, premature infants find it difficult to adjust to life outside the womb. As a result, special consideration must be made. They include modifying the environment's temperature, humidity, and oxygen needs to reflect those of the mother's womb. These conditions might be replaced with a baby incubator. This tool's creation is intended to make it easier for midwives and other healthcare professionals to keep an eye on many baby incubators. The Internet of Things (IoT) system is used by this instrument to transfer data. Using three ESP32 modules that have been put together to create modules that can collect data and have that data analyzed by a server (central monitoring) Raspberry Pi Zero W. Data will be sent via Internet of Things (IoT) technology, and the website will display the data. Two tests were conducted at 32 degrees Celsius, one at 34 degrees Celsius, and one at 36 degrees Celsius for a total of five tests. This technique was developed using a form of pre-experimental, after-only study. In this configuration, researchers may only see the module reading results; incubator analyzer data are not shown. Error value 3 in monitoring at 32 degrees Celsius has a maximum error of -0.04 percent. The largest error value occurs when the temperature is set to 34 degrees Celsius, when the monitoring error value is -0.016%. Monitoring inaccuracy is at its highest, 0.01%, when the temperature is 36 degrees Celsius. The monitoring 3 error value is most at 32 degrees Celsius (-0.025 percent), followed by 34 degrees Celsius (0.031 percent), and finally 36 degrees Celsius (0.049 percent), as shown by data on noise measurements. The findings demonstrate that each measurement performed by the module still contains mistakes. Medical staff should find it easier to concurrently monitor many infant incubators thanks to this discovery.
Utilization of High-Power LEDs at Low-Cost Non-Invasive X-ray KV Meter Detectors Design I, M. Bagus F.; P, Moch Prastawa A T; Setiawan, S Y; Lamidi, Lamidi; Hariwisana, I D G; Indrato, T B; Asghari, Mansour
Indonesian Journal of Electronics, Electromedical Engineering, and Medical Informatics Vol. 4 No. 3 (2022): August
Publisher : Jurusan Teknik Elektromedik, Politeknik Kesehatan Kemenkes Surabaya, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35882/ijeeemi.v4i3.150

Abstract

X-ray radiation is used to diagnose human body. In order to apply this method, two parameters are commonly used as the settings. The first is the KV value and the second is the mA value. In this case, when an error occurs in the kV setting, it will cause poor image quality, thus leads to inaccurate information in patient’s examination. It is likewise the presence of excessive doses to the patient's body. To ensure that the KV value produced is under the settings on the machine consul, both invasive and non-invasive measurements were carried out. Non-invasive is becoming an easy standard to do. Several types of equipment on the market and research results have been widely used for this non-invasive activity. The problem emerges is that the existing tools still use expensive detectors. The purpose of this study was to design a low-cost non-invasive x-ray KV meter detector using an LED detector whose ability was tested at each point of collimation. Furthermore, the method used in this study was to stump the detectors at 4 ends of the collimation by 20 cm apart. The data were taken by doing x-ray exposure at a distance of 60 cm. The module measurements were carried out under 80 mA exposure conditions for 1 second and a collimation area of ​​20 x 20 cm. Meanwhile, the x-ray exposure settings were performed at 40kV, 50kV, 60kV, and 70kV settings. The module measurement results were further compared to the x-ray machine setting values. Based on the comparison results, the smallest error rate was obtained on Sensor 2 by 0.83%, while the highest error rate was obtained on S5 by 6.43%. The results can be concluded that the LED phosphor can capture x-rays, but the detector was weak due to the interference from ambient light.
A Low Cost Baby Incubator Design Equipped with Vital Sign Parameters Lamidi, Lamidi; Kholiq, Abd; Ali, Muslim
Indonesian Journal of Electronics, Electromedical Engineering, and Medical Informatics Vol. 3 No. 2 (2021): May
Publisher : Jurusan Teknik Elektromedik, Politeknik Kesehatan Kemenkes Surabaya, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35882/ijeeemi.v3i2.203

Abstract

The aim of this study was to create a compact system at a low cost in an infant incubator. Apart from stabilizing the temperature, it can also calculate the premature baby's heart rate and oxygen saturation value. The contribution of the system being built can detect the early symptoms of congenital abnormalities so that abnormalities detection becomes more practical. The temperature stability in this system uses a threshold system, where the sensor readings are compared with the set point value. Meanwhile, the SpO2 system uses a finger sensor attached to the baby's finger to detect oxygen saturation and heart rate. The signal from the sensor is processed in a signal conditioning circuit consisting of an astable circuit, filter and amplifier, LPF, and demultiplexer. Based on the results of testing and measurement, the difference produced by this tool is only 0.13 - 0.182 ° C. The biggest error in the system is 0.517%. Measurement of skin temperature was carried out on 10 respondents with an average value of 34.825 ° C. so that the difference generated from this tool is only 0.175 ° C, the difference on the Humidity parameter is 0.21%. The average BPM reading of respondent 1 was 81 beats per minute and the average SpO2 value was 97%. The average BPM reading of respondent 2 was 83 beats per minute and the average SpO2 value was 98%. You can see that the module with the Arduino control system can work automatically and is able to adjust the stability of the baby incubator according to the settings. In addition, the BPM and SpO2 systems are within tolerance so they can be used for patient measurements
Snellen Chart Based On Android Control Fitria, Annisa Novantina Eka; Nugraha, Priyambada Cahya; Lamidi, Lamidi
Indonesian Journal of Electronics, Electromedical Engineering, and Medical Informatics Vol. 1 No. 1 (2019): August
Publisher : Jurusan Teknik Elektromedik, Politeknik Kesehatan Kemenkes Surabaya, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35882/ijeeemi.v1i1.239

Abstract

Eye vision is a person's visual acuity examination that is usually done using a Snellen chart. The Snellen chart is a poster that contains a number of letters that are different on each line with the letters getting closer to the bottom lines. Eye vision examination using a normal Snellen chart is done at a distance of 6 meters because someone is considered normal if he is able to read on the 20/20 line in feet or 6/6 in meters. Snellen chart control android is an electronic Snellen chart that controls the light transfer using Android. Commands originating from the Mitapp application on android are sent to the Bluetooth HC-05 module in the min sys Atmega16 circuit. Atmega 16 was chosen because it has a sufficient number of pins to control the displacement of the lights used by 23 lights. The appearance of the MIT app application has been adjusted to the letters contained in the Snellen chart, making it easier for operator to correct the results of the readings that have been performed by the eye vision patient
Baby Incubator Monitoring Center for Incubator Temperature and Skin Temperature using WiFi Network Nuristadarro, Nuristadarro; Hamzah, Torib; Lamidi, Lamidi
Indonesian Journal of Electronics, Electromedical Engineering, and Medical Informatics Vol. 1 No. 2 (2019): November
Publisher : Jurusan Teknik Elektromedik, Politeknik Kesehatan Kemenkes Surabaya, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35882/ijeeemi.v1i2.251

Abstract

Premature infants with birth age less than 38 weeks who have a higher risk of death require continuous monitoring. Therefore, a temperature monitoring system is needed in the incubator. So the purpose of this research is to develop a baby incubator monitoring system that still uses the manual method to be faster and easier. This module has a wireless system and uses a Wi-Fi network for data transmission. By using several ESP32 modules assembled into a central system, where the data obtained from monitoring skin temperature from the DS18B20 sensor and incubator temperature monitoring data from the DHT22 sensor will be processed by the ESP32 which functions as a client and collected at one central point of the ESP32 which has been functioned as a server using the wifi network as data transmission. then the data collected on the server will be displayed on the nextion TFT display. Based on the overall measurement results using 2 baby incubators, the highest error value is 1.387% for the incubator temperature parameter and 3.911% for the skin temperature parameter. The results showed that the module that was made still contained errors in each measurement. The results of this study can be implemented to make it easier for nurses to monitor premature babies easily and quickly
Modification of Infant Warmer with PID Temperature Controlled with Apgar Monitoring and Respiration Rate Mahendra, Reynaldi Krisna; Lamidi, Lamidi; Kholiq, Abd.
Indonesian Journal of Electronics, Electromedical Engineering, and Medical Informatics Vol. 2 No. 1 (2020): February
Publisher : Jurusan Teknik Elektromedik, Politeknik Kesehatan Kemenkes Surabaya, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35882/ijeeemi.v2i1.259

Abstract

Newborns, both healthy and premature babies, have a difficult problem, newborns withstood the environment with new ones that previously depended on the mother's uterus and also as a place for initial examination in nayi after just being discussed. The purpose of this study was to add a baby warmer with PID temperature control and add respiration parameters and APGAR. The contribution in this study is the PID control system which is used to control temperature and is also a sensor of respiration rates to determine respiration in infants. So that the values ​​of the temperature sensor and Respiration Rate sensor can be stable it is necessary to adjust the sensor's reading time. The LM35 sensor can activate temperature in the body, the Flex Sensor is used to read respiration values ​​in infants. Based on data collection of respiration rates taken from adults, an average value of 18.5 times per minute was obtained in the first attempt, and 21 times per minute in the second trial. Respiratory rate values ​​that have not been stable take data because there are still external factors, such as changes from respondents and others. The results of this research can be implemented on baby warmers to improve the application of updates to the baby.
PENYULUHAN MENUMBUHKAN MINAT BERWIRAUSAHA PADA GENRE PIK-R TIPES SURAKARTA Rahadhini, MD.; Lamidi, Lamidi; Rahmawati, Sisca Dian; Reta, Theana Gita
Community Development Journal : Jurnal Pengabdian Masyarakat Vol. 6 No. 1 (2025): Volume 6 No. 1 Tahun 2025
Publisher : Universitas Pahlawan Tuanku Tambusai

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31004/cdj.v6i1.40644

Abstract

Abstrak Pengabdian masyarakat dengan judul "Penyuluhan Menumbuhkan Minat Berwirausaha pada Genre PIK-R Tipes Surakarta" bertujuan untuk mengatasi masalah pengangguran di kalangan remaja, khususnya di Kelurahan Tipes, Surakarta. Kegiatan ini dilatarbelakangi oleh rendahnya jumlah wirausahawan di Indonesia, yang hanya mencakup sekitar 3,47% dari total penduduk. Oleh karena itu, upaya ini dilakukan untuk meningkatkan jiwa kewirausahaan remaja melalui penyuluhan dan pendampingan, sebagai langkah untuk menciptakan peluang usaha baru yang dapat mengurangi angka pengangguran. Kegiatan ini dilaksanakan selama Juni hingga Agustus 2024, dengan pendekatan berupa survei awal, diskusi tim, serta dua tahap pelaksanaan penyuluhan dan pendampingan. Tahap pertama dilakukan pada 13 Juli 2024 dengan fokus pada pentingnya minat berwirausaha, sementara tahap kedua dilaksanakan pada 24 Agustus 2024, berisi panduan tentang cara memperoleh modal usaha. Melalui kegiatan ini, remaja PIK-R diberikan pemahaman tentang aspek-aspek kewirausahaan, pentingnya keberanian mengambil risiko, dan teknik pengelolaan usaha yang baik. Hasil pengabdian menunjukkan peningkatan pemahaman, pengetahuan, dan minat remaja dalam berwirausaha. Anggota PIK-R Kelurahan Tipes menjadi lebih tertarik memulai usaha dengan mempertimbangkan risiko dan memanfaatkan peluang yang ada. Sebagai tindak lanjut, pengabdian ini direncanakan untuk diperluas dengan melibatkan UMKM di wilayah Solo Raya, guna memperkuat dampak pemberdayaan ekonomi lokal melalui kerjasama dengan LPPM Universitas Slamet Riyadi Surakarta. Secara keseluruhan, pengabdian ini memberikan kontribusi signifikan dalam menanamkan semangat kewirausahaan, mendukung pertumbuhan ekonomi, dan memperluas wawasan remaja dalam menciptakan usaha mandiri.
Co-Authors ., Sumber Abd Kholiq Abd Kholiq Abdul Kholiq Abdullayev, Vugar Ahniar, Nur Hasanah Akbar, Ariel Andi Ali, Muslim Alviola, Sharen Aminuyati Amrinsani, Farid Andjar Pudji Anindia Dita Rachmadani Annisa Novantina Eka Fitria Aprilya, Dandy Ariswati, Her Gumiwang Asghari, Mansour Bambang Guruh Irianto Bismar Arianto Darmawan, Dicky Denis Kurniar Wicaksono Desma Rahadhini, Marjam Dyah Titisari Dyah Titisari DYAH TITISARI Dyah Titisari, Dyah ELLY RAHMAWATI Farid Amrinsani Fatmawati, Elia Resha Febri Indiani Febrianur Ibnu Fitroh Sukono Putra Fitri Kurnianingsih Fitria, Annisa Novantina Eka Hamzah, Torib Hariwisana, I D G I Dewa Gede Hari Wisana I, M. Bagus F. Indrato, T B Indrato, Tri Bowo Junti Ayu Ariyani Kholiq, Abd Kholiq, Abd KHOLIQ, ABD. Kinanti Elok Putri Kurniawan, Desi Dwi Kurniawan, Rifqi Leo Agung Saputra Lisa choirunnanda Lusiana Lusiana Lusiana Lusiana M. Ridha Mak'ruf Mahdy, Hafizh Aushaf Mahendra, Reynaldi Krisna Mahmud Mahmud Marjam Desma Marjam Desma Rahadhini Mayarni MD. Rahadhini Misra, Shubhrojit Muhammad Adam Yazid Zinedine Muhammad Syahrul Azam Nampira Murningsih, Setia Muslim Ali Nabilla Putri Amaria Nazaki Nazaki Nazila, Ragimova Nora Bouzeghaia Nova Vauzira Muvidah Novalino, Dicky Nugraha, Priyambada Cahya Nur Inayati Khoiron Nuristadarro, Nuristadarro Okparizan Okparizan Oksep Adhayanto P, Moch Prastawa A T Prastawa Asalim Tetra Putra Priyambada Cahya Nugraha Puspitasari, Dila Anggraeni Puspitasari, Ratna Ika Rahmawati, Triana Ratna Ika Puspitasari Reta, Theana Gita Retno Susanti Risanda Alirastra Budiantoro Riska Fii Ahsani Rizki Andriyanto Roymon Panjaitan Rumzi Samin Sari Luthfiyah Sedigheh Ashgari Baighout Septiawan, Armauliza Setiawan, S Y Sharen Alviola Shubhrojit Misra Sisca Dian Rahmawati Sumber Suprihatmi Sri Wardiningsih Surya Wahyu Prasetya Syaifudin Syaifudin Syaifudin, Syaifudin Syuzairi, Mohammad Tetra Putra, Moch Prastawa Assalim Theana Gita Reta Torib Hamzah Tri Bowo Indrato Triana Rahmawati Triana Rahmawati Triwiyanto Triwiyanto Tsani Said Rahayu Tubagus Achmad Darodjat Utomo, Bedjo Venika Salsabila Ayu Pramarini Vinnasti, Derby Wahyu Ramadhan Putra Yenda Mita Barus Yhuyati, Yhuyati Yuri Nanda, Ilham Zakiyah, Nadiya Fikriyatus