Claim Missing Document
Check
Articles

Found 33 Documents
Search

Penentuan Menu Makanan Dalam Pemenuhan Kebutuhan Kalori Buruh Pabrik Dengan Analisis Detak Jantung Hermansyah, Muhammad; Masud, M. Imron
Jurnal Rekayasa Sistem Industri Vol 7, No 1 (2018): Jurnal Rekayasa Sistem Industri
Publisher : Universitas Katolik Parahyangan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (924.604 KB) | DOI: 10.26593/jrsi.v7i1.2371.11-20

Abstract

Many companies often pay less attention to the health of their employees during the work, it can seen from the number of employees exposed to the risk of diseases or health problems in retirement due to the imbalance between the needs of body and energy consumption that can lead to decreased productivity, especially labor-intensive companies one of them on the CV. X. The purpose of this study is to calculate the number of calories needed healthy body for employees of transport workers to regulate the pattern of food intake of the right transport workers so that caloric needs can be met. Data is collected by interview, observation and documentation study. The results showed that the work performed by transport workers was 1.5 hours including heavy work, 5 hours of moderate work and 1.5 hours of rest with an average caloric needs of 1253,601 cal / 8 hours of work, the body will experience a lack of calories when they work more or less about 6.5% (106,8576 cal / 8jam) of food they have eaten daily, then improved the food menu with an average of 1284,013 cal / 8 hours, an increase of 9.63% with the ratio of work productivity from before the improvement of 73.99% to 74.81%, resulting in an increase of 0.81%, implying on the convenience of laborers
Community assistance in the establishment of an educational tour of Kampung Sutera Mas'ud, M. Imron; Zahro, Mir’atuz; Setiawan, Bayu; Putri, Widya Lestari; Kurniasari, Nurul Sandra; Fauzi, Achmad; Risma, Nafiatul; Nafisah, Jauharotun
Community Empowerment Vol 6 No 7 (2021)
Publisher : Universitas Muhammadiyah Magelang

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (448.194 KB) | DOI: 10.31603/ce.5254

Abstract

The existence of educational tourism is increasingly needed by the community. In addition to the limited number, educational tourism also has a strategic role such as being able to help increase the income of the surrounding community. This community service aims to empower the community through assistance in establishing an educational tour of Kampung Sutera in Sentul Village, Purwodadi District, Pasuruan Regency. This service method was carried out through FGDs, surveys, interviews, mapping, and training. This service activity gets community support, so that Kampung Sutera can be realized and will have a positive impact on the community's economy. In addition, the existence of Kampung Sutera is also supported by the existence of a website as a promotional medium.
PENDEKATAN RASIO OUTPUT INPUT UNTUK PENGUKURAN PRODUKTIVITAS PERUSAHAAN DI UD X M. Imron Mas'ud
KAIZEN : Management Systems & Industrial Engineering Journal Vol 5, No 1 (2022)
Publisher : Universitas PGRI Madiun

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25273/kaizen.v5i1.12215

Abstract

This study aims to measure the productivity level of plastic ore processing companies using the PE 1+  type of input output ratio approach at UD. X which is located in Pasuruan Regency. This research was carried out considering the current amount of plastic waste that continues to grow and the very rapid development of the plastic ore processing industry today is marked by the emergence of new industries and the development of small, medium and large scale plastic ore processing industries, so that companies are automatically demanded to be more efficient. efficient and effective so that it leads to a healthy, productive and competitive company, one of which is by measuring the level of productivity with the Output Input Ratio approach. The results showed that the company's total productivity was 1.0323. This means that each use of input (I) totals Rp. 1,032,300 rupiah produces a total output (O) of Rp 1,014,600 rupiah.
PENDEKATAN RANTAI MARKOV DALAM PEMILIHAN UNIVERSITAS DI PASURUAN M. Imron Mas’ud; Anis Safitri; Achmad Abassyahil

Publisher : Department of Industrial Engineering - Universitas Yudharta Pasuruan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (884.305 KB)

Abstract

Penelitian ini bertujuan untuk mengetahui peluang besarnya perpindahan pemilihan minat siswa SLTA ke universitas di Pasuruan dengan menggunakan metode Rantai Markov berdasarkan data sampel terdiri dari 40 siswa-siswi hasil dari siswa kelas XII SMKN Rembang Pasuruan, SMKN Gempol, MAN Pasuruan, dan SMKN 1 Bangil terhadap pemilihan universitas di Pasuruan. Hasil penelitian menunjukkan bahwa untuk peminat Universitas Yudharta Pasuruan adalah 60 %, peminat Universitas Merdeka Pasuruan adalah 40 %. Prediksi peminatan pada kondisi ekuilibrium adalah peminat UYP 57,5 %, peminat Universitas Merdeka Pasuruan adalah 42,5 %. Berdasarkan hasil analisis, pangsa pasar terbesar dimiliki oleh peminat Universitas Yudharta Pasuruan, yaitu sebesar 58,98 %. 
PENERAPAN METODE FORECASTING DALAM PERENCANAAN PRODUKSI BAKPIA DENGAN MENGGUNAKAN SOFTWARE POM GUNA MEMENUHI PERMINTAAN KONSUMEN Didik Junaedi; M. Imron Mas'ud

Publisher : Department of Industrial Engineering - Universitas Yudharta Pasuruan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35891/jkie.v5i3.2042

Abstract

Home Industry has limited resources and a variety of suggestions (Multi Objective) to be obtained. The goal to be achieved is to maximize the amount of production, maximize profits, drink working hours and minimize the use of hours and minimize the use of raw materials. Forecasting (forecasting) is an attempt to estimate what happens in the future based on previous data or past data, which is based on scientific and qualitative methods carried out systematically, this study aims to find the exact value of the method predicted by looking at MAPE, MAD, MSE values ​​who want to achieve UKM Siti Khotijah.
PROSES MANUFAKTUR PADA MESIN PRIMER DAN SEKUNDER CV. KARUNIA MENGGUNAKAN METODE LINIER PROGAMMING Ahmad Fauzi; M. Imron Mas'ud

Publisher : Department of Industrial Engineering - Universitas Yudharta Pasuruan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35891/jkie.v6i2.2055

Abstract

Increasingly fierce business competition demands industries in manufacturing and services to increase the creativity of its business strategy. The same business strategy will not necessarily give the same results if it is still implemented so that its performance needs to be assessed. For this reason, companies are expected to be able to implement a good production process system and be able to continue to improve efficiency. CV. The gift is a company that moves coral (split) experiencing problems related to the determination of the number of products produced by the company every month. This causes that in each period, the company experiences excess - decreases in production so that the company's profit is not optimal and results in a large saving cost. This situation occurs because the company has been carrying out production planning based on intuition. The method used as a solution is Linear Progamming. This study aims to determine the production process and increase company profits. For the calculation of the amount of production in each period. Then it can be concluded that the objective function sought is the optimal value "Maximum" in November with a value of Z = 310, January with a value of Z = 3600, February with a value of Z = 7000, April with a value of Z = 4600, and May with a value of Z = 8000. Whereas the objective function for which the optimal value is "Minimal" is found in December with a value of Z = - 4675, and in March with a value of Z = - 2825. There is a "Minimum" value in the objective function for which the optimal value for December 2017 is sought. and in March 2018 caused by a decrease in production capacity in variants x1, x2, x3, x4 which is influenced by the decrease in demand for each variant from the customer
PERENCANAAN INOVASI PENGEMBANGAN AGROWISATA BUKIT FLORA DENGAN PENDEKATAN METODE BISNIS MODEL KANVAS Ummi Hanik; M. Imron Mas'ud

Publisher : Department of Industrial Engineering - Universitas Yudharta Pasuruan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35891/jkie.v6i3.2088

Abstract

Agro-tourism in Indonesia is one of the driving sectors in improving the economy that is in great demand by tourists from both domestic (domestic) and foreign (foreign) countries. There fore there is a need for development in its management, one of which is in the Bukit Flora Agro Tourism. To realize this there needs to be a plan for innovation. The purpose of this study is to identify the strengths, weaknesses, opportunities, and threats of the internal and external environment of the flora hill agrotourism, and determine the innovation plan for the development of flora hill tourism by using the Business Model Canvas approach. The final results of the research are expected to know the strengths, weaknesses, opportunities, and internal and external environmental threats of the flora hill agrotourism, and determine the innovation plan for the development of flora hill tourism
INTEGRASI LINIER PROGRAMMING DAN PROGRAM DINAMIK UNTUK MENENTUKAN JUMLAH PRODUKSI KOPI YANG OPTIMUM DI UD. GADING MAS Novitasari; M. Imron Mas'ud

Publisher : Department of Industrial Engineering - Universitas Yudharta Pasuruan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35891/jkie.v7i1.2095

Abstract

The increasingly fierce business competition is currently demanding business players to optimize their products to get the maximum profit, one of which is UD.Gading Mas, which is one of the Small and Medium Industries (IKM) which manages the typical coffee of Pasuruan Regency which has been producing to develop the potential of local resources area. In developing the potential of local resources, the company experienced problems in determining the amount of production, so the company experienced excess products. With the integration of the Linear Program and Dynamic Program approach, it is expected that the company can determine production well, so that neither excess or lack of product. From the results of this study indicate that the planning using a dynamic program is more profitable. With the optimum production level of 1,138 packs with an income of Rp. 22,760,000.
Model pengembangan pengelolaan hasil tangkap ikan masyarakat pesisir kabupaten Pasuruan melalui pendekatan linear programming dan business model canvas dalam industri 4.0 M. Imron Masud; Abdul Wahid

Publisher : Fakultas Pertanian Universitas Yudharta Pasuruan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (764.787 KB) | DOI: 10.35891/agx.v11i1.1672

Abstract

Pasuruan Regency is one area that has the potential to manage fishing products because this area has a coastal area whose people work as fishermen. Based on the potential of natural resources possessed, the level of income and welfare of coastal communities can be better than other village areas. However, the level of income and welfare of coastal communities is still lacking, one of which is less than optimal in processing fishing products. The purpose of this study is to optimize the processing of coastal fishing products and formulate business strategies through the Linear Programming and Business Model Canvas methods. The final result obtained is a profit value of Rp. 84,642.33 per person, while the Model of the Development of Fishing Management of coastal communities in facing the industrial era 4.0 in order to create added value through the use of online media.
OPTIMASI MANAGEMET SUPLY CHAINBAHAN BAKU KEDELAI IMPOR DI MASA PANDEMI COVID-19 MENGGUNAKAN METODE AHP Nuriyanto; M. Imron Mas'ud

Publisher : Department of Industrial Engineering - Universitas Yudharta Pasuruan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35891/jkie.v7i2.2290

Abstract

PT.Joyo Continues is a company engaged in shipping services and distributors of imported soybeans from abroad such as the USA, Brazil and Argentina which will be distributed again to local soybean craftsmen, especially the Pasuruan region and its surroundings, this research was conducted to determine which suppliers are really effective and suitable according to the characteristics of the company, as well as being able to provide the best profit for the company, this research is also intended to help companies determine strategies in facing increasingly competitive market competition. Selection of this supplier uses the AHP (Analytical Hierarchy Process) and SWOT (Strengths Weakeness Opportunity Threats) method. SWOT analysis is a systematic identification of various factors to formulate a company strategy. While AHP is a multicriteria decision-making technique, in which quantitative factors and qualitative factors are combined, so that quality, position, and evaluation can be carried out in the form of variable-variative evaluations (Saaty, 1994). , quality, distribution and consistency as well as company strategy to optimize marketing strategy amidst the global crisis caused by the pandemic, obtained the USA as an alternative to the main supplier.