Claim Missing Document
Check
Articles

Found 3 Documents
Search
Journal : Rekayasa Mesin

Rancang Bangun Model Alat Uji Teras Reaktor Nuklir Small Modular Reactor (SMR) Dengan Fluida Pendingin H2O Untuk Kondisi Konveksi Paksa Ramadhan, Anwar Ilmar; Dermawan, Erwin; Diniardi, Ery; Arifangga, Muhammad
Jurnal Rekayasa Mesin Vol 6, No 1 (2015)
Publisher : Jurusan Teknik Mesin, Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (950.802 KB) | DOI: 10.21776/ub.jrm.2015.006.01.2

Abstract

Heat transfer performance poor will have a negative impact on the reactor system which in turn could affect the release of radioactive substances into the surrounding environment so as to endanger the safety of the environment and living things that exist around the reactor. The purpose of this research is to create or design a testing tool wake models in a nuclear reactor core in a laboratory scale assuming cylindrical heat derived from the electrical energy that does not harm the environment. The method used in the completion design of the reactor core model of test equipment is the study of literature, making the concept design and subsequent testing tool designing wake. Once the design is complete, the next stage of the operation of test equipment to determine the performance of the test equipment. The comparison between experimental simulation on the condition of forced convection heat flux 500000 W/m2 at a speed of 0.3 m/s produces fluid temperature difference between 0.00001 K to 0.8 K. In natural convection comparison between experimental results with simulation the heat flux 500000 W/m2 at a speed of 0.3 m/s resulted in the difference between the 0.1 K to 28 K. The smaller the fluid temperature differences between the experimental simulations, the better the performance of the test equipment.
EFFECT OF ANNEALING ON THE MECHANICAL PROPERTIES OF FUSED DEPOSITION MODELING 3D PRINTED PLA Natayu, Amartya; Muhammad, Azka Aulia; Tumada, Azhari; Saptaji, Kushendarsyah; Trisnadewi, Titin; Triawan, Farid; Ramadhan, Anwar Ilmar; Azhari, Azmir
Jurnal Rekayasa Mesin Vol. 15 No. 3 (2024)
Publisher : Jurusan Teknik Mesin, Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/jrm.v15i3.1625

Abstract

Additive manufacturing or 3D printing is a rapidly moving fabrication technology with many usages in various fields. One of the methods used in 3D printing is Fused Deposition Modeling (FDM), where polylactic acid (PLA) filament is melted and deposited layer by layer to form the desired parts. This study explored the impact of annealing on the mechanical properties of 3D printed PLA specimens. Tensile specimens were produced using FDM following ASTM D638 standards. The specimens were annealed at 95°C and 145°C for 30, 60, and 120 minutes. Two untreated specimens served as benchmarks. Tensile tests were conducted on all specimens to evaluate their mechanical properties. The most optimal result was achieved with annealing at 95°C for 30 minutes, producing Young’s modulus of 3.3 GPA and the highest ultimate tensile strength (UTS) of 38.9 MPa. Other parameters resulted in lower properties compared to the untreated specimens.
EFFECT OF ANNEALING ON THE MECHANICAL PROPERTIES OF FUSED DEPOSITION MODELING 3D PRINTED PLA Natayu, Amartya; Muhammad, Azka Aulia; Tumada, Azhari; Saptaji, Kushendarsyah; Trisnadewi, Titin; Triawan, Farid; Ramadhan, Anwar Ilmar; Azhari, Azmir
Jurnal Rekayasa Mesin Vol. 15 No. 3 (2024)
Publisher : Jurusan Teknik Mesin, Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/jrm.v15i3.1625

Abstract

Additive manufacturing or 3D printing is a rapidly moving fabrication technology with many usages in various fields. One of the methods used in 3D printing is Fused Deposition Modeling (FDM), where polylactic acid (PLA) filament is melted and deposited layer by layer to form the desired parts. This study explored the impact of annealing on the mechanical properties of 3D printed PLA specimens. Tensile specimens were produced using FDM following ASTM D638 standards. The specimens were annealed at 95°C and 145°C for 30, 60, and 120 minutes. Two untreated specimens served as benchmarks. Tensile tests were conducted on all specimens to evaluate their mechanical properties. The most optimal result was achieved with annealing at 95°C for 30 minutes, producing Young’s modulus of 3.3 GPA and the highest ultimate tensile strength (UTS) of 38.9 MPa. Other parameters resulted in lower properties compared to the untreated specimens.
Co-Authors Abduh Al Afghani Abrori, Muhammad Reza Achmad Nuril Fajar Adawiyah, Sa'diyah El Ade Muslimat Aditya Firmanto Agung Julianto Agung Siswahyu Ahdiat Leksi Siregar Ahmad Fauzi Ahmad Yakub Ahmad Yakub, Ahmad Akmal Imam Faisal Alfa Taufan Latif Alvika Meta Sari Amri Abdulah Anggoro Septilarso Annisa Mulia Rani Annisa Mulia Rani Aryadi Suwono As Natio Lasman As Natio Lasman Azhari, Azmir Azmairit Aziz Azmi, Wan Hamzah Bambang Setiawan Boy Setiawan Choirul Anwar Dalil Sumiyarsono, Dalil Daruki Daruki Dede Erland Ramadhan Deni Almanda Deni Almanda Deni Almanda Dermawan, Erwin Dharu Dewi Dhian Trisnadi Setyawan Diah Safitri Ningrum Dicky Dimyati Dino Rimantho Djoko Hadi Prajitno Djoko W Karmiadji Djoko W Karmiadji Dodi Mulyadi Dyota, Arya Smara edy susanto Efrizon Umar Efrizon Umar Efrizon Umar Efrizon Umar Efrizon Umar Eka Revi Ruswandi Eka Revi Ruswandi, Eka Revi Eko Kiswoyo Erwin Dermawan Erwin Dermawan Erwin Dermawan Erwin Dermawan Erwin Dermawan Erwin Dermawan Ery Diniardi Fachri Amrulloh Fadliondi Fahmi Al Diansyah Faisal, Akmal Imam Fathan Mubina Dewadi Fatma Sari Fikri, Muhamad Rausyan Fikriyansyah Fikriyansyah Fikriyansyah, Fikriyansyah Firmansyah Firmansyah Firmansyah Firmansyah Fitriana, Rian Frisca Amalia Ummay Govinda Gatot Aditya Hadisujoto, Ignatius Budi Sutanto Hasan Basri Hasan Basri Hasan Basri Hasan Basri Hasan Basri Hayya Afifah Hendra Saputra Hendra, Franka Idhar Mahasen Indra Setiawan Indriasari Indriasari Iphov Kumala Sriwana Irwan Firmansyah Ismiyati Ismiyati Istianto Budhi Rahardja Istianto Budhi Rahardja Istianto Budhi Rahardja Istianto Budhi Rahardja Istianto Budhi Rahardja Iwan Setiawan Januar Parlaungan Siregar Juni Afriani Juniasih, Octarina Adiati Kamila, Fatima Tasya Khoirudin Khoirudin Khoirudin Khoirudin Kisman H Mahmud Korada Viswanatha Sharma Kushendarsyah Saptaji M Al-Haramain M. Ivan Satryo Manasikana, Dinda Arina Maya Dewi Dyah Maharani Mohd Amiruddin Fikri Mohd Fairusham Ghazali Mohd Hamisa Abdul Hamid Mohd Zawawi, Nurul Nadia Muchamad Oktaviandri Muhammad Arifangga Muhammad Arifangga, Muhammad Muhammad Dadi Saputra Muhammad Daroji Muhammad Reza Abrori Muhammad Reza Abrori, Muhammad Reza Muhammad, Azka Aulia Mulyadi Mulyadi Munzir Qadri Murtalim Mushoffa Ali Firdaus Mushoffa Ali Firdaus, Mushoffa Ali Mutiara Salsabila N Nelfiyanti Nana Rahdiana Nana Rahdiana Nana Rahdiana Natayu, Amartya Nathanael Tandian Nur Yulianti Hidayah, Nur Yulianti Nurrochman, Taufik Nurul Hidayati Fithriyah Nurul Nadia Mohd Zawawi Rahardja, Istianto Budhi Rahmawati Suryani Ramadhani, Mochammad Rafli Rantawi, Azhar Basyir Raslan A. Alenezi Rasma Rasma Rasma Rasma Ratri Ariatmi Nugrahani Rian Fitriana Ricko Valderama Ridhwan Adhitya Ibnimatiin Riki Effendi Rikman Rikman Riza Samsinar Rizalman Mamat Rizkyta, Velia Ayu Roni Muhammad Susanto Rudiatin, Endang Rulan Dinary Rulan Dinary Runik Machfiroh Safril Safril Safril Sasi Kirono Semendo, Rifqi Putra Setiawan, Hanif Rama Yuda Sharifah Norsakinah Syed Zainal Abidin Sharma, Korada Viswanatha Shieddique, Apang Djafar Siregar, Ahdiat Leksi Sitti Nurbaya Ambo Sony Hari Mukti, Sony Hari Sukarman Sukarman Sukarman Sukarman Sukarman Sukarman Sukarman Sukarman Sukarman Sulis Yulianto Sulistiono Sulistiono Sumanto Suripto, Heri Suroto Munahar Susanto, Roni Muhammad Syawaluddin Syawaluddin Syawaluddin Syawaluddin Syawaluddin Syawaluddin Syawaluddin Syawaluddin Syawaluddin Syawaluddin, Syawaluddin Syawaluddin, Syawaluddin Sylvia Madusari Taufik Nurrochman Thomas Djunaedi Tri Yuni Hendrawati Triawan, Farid Trisnadewi, Titin Tumada, Azhari Vector Anggit Pratomo Waldi Isnaini Wan Hamzah Azmi Wan Hamzah Azmi Wiwik Sudarwati Wiwit Kartika Sari Yudi Dermawan Yudistirani, Sri Anastasia Yuli Panca Asmara Yusuf Yusuf