Claim Missing Document
Check
Articles

Found 35 Documents
Search

Pengaruh parameter suhu dan equivalence ratio terhadap kandungan tar pada gasifikasi limbah biomassa menggunakan ASPEN plus Nurbaity Khoirun Nissa; Arif Rahman Saleh; Arbye S Arbye S; Sigit Mujiarto
Jurnal Mesin Sains Terapan Vol 10, No 2 (2026): JURNAL MESIN SAINS TERAPAN
Publisher : Politeknik Negeri Lhokseumawe

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30811/jmst.v10i2.10484

Abstract

Indonesia faces challenges in the transition toward cleaner and more sustainable energy, one of which is the utilization of rice husk biomass waste. Magelang Regency produces approximately 33,960 – 39,054 tons of rice husk per year, which has not been optimally utilized. Rice husk can be converted into synthesis gas through gasification, although this process produces tar that can clog equipment, cause corrosion, and reduce system efficiency. This study models the rice husk gasification process using ASPEN Plus software with a kinetic reaction approach at an operating temperature of 900°C, identified as the optimum temperature, and analyzes the effect of equivalence ratio (0.30, 0.35, and 0.40) on tar content and synthesis gas composition. The reactor model was developed through a drying stage using an RStoic block, pyrolysis using RYield and RGibbs blocks, and gasification using RPlug blocks divided into oxidation and reduction zones. The results show that increasing the equivalence ratio from 0.30 to 0.40 effectively reduces tar content from 0.03109 kg/Nm³ to 0.01206 kg/Nm³, while H2 content decreases from 14.01% to 11.66%, CO from 23.54% to 18.70%, and CH4 from 1.04% to 0.86%, whereas CO2 content increases from 5.95% to 8.23%. The condition of equivalence ratio 0.30 produced the best synthesis gas quality, while the lowest tar content was achieved at equivalence ratio 0.40.
Analisis kekuatan struktur pressure vessel penyimpanan syngas menggunakan finite element analysis (FEA) pada tekanan 35 bar Wahyu Tri Apriliyan; Sigit Mujiarto; Rany Puspita Dewi; Arif Rahman Saleh
Jurnal Mesin Sains Terapan Vol 10, No 2 (2026): JURNAL MESIN SAINS TERAPAN
Publisher : Politeknik Negeri Lhokseumawe

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30811/jmst.v10i2.10462

Abstract

Synthetic gas (syngas) is a gaseous product of biomass gasification primarily composed of hydrogen (H₂) and carbon monoxide (CO), making it a promising alternative energy source. However, the flammable and toxic nature of syngas requires a safe and efficient storage system. This study aims to analyze the structural strength of an Adsorbed Natural Gas (ANG)-based pressure vessel for syngas storage at an operating pressure of 35 bar using the Finite Element Analysis (FEA) method. The pressure vessel was designed in accordance with the ASME BPVC Section VIII Division 1 standard, while the numerical simulation was performed using SolidWorks 2022. The design resulted in a horizontal pressure vessel with an internal diameter of 1.26 m and shell and head thicknesses of 36 mm. The simulation results indicated a maximum von Mises stress of 116 MPa, a maximum displacement of 0.705 mm, and a factor of safety of 2.2. The maximum stress remained below the yield strength of SA516 Grade 70 steel, indicating that the pressure vessel design is structurally safe and suitable for operation at a pressure of 35 bar.
Perancangan dan analisis termal tabung pemanas berbasis heat exchanger coil menggunakan refrigeran R32 untuk sistem water jacket bioreaktor fermentasi kopi Bariq Firmanda; Trisma Jaya Saputra; Nur Hayati; Arif Rahman Saleh
Jurnal Mesin Sains Terapan Vol 10, No 2 (2026): JURNAL MESIN SAINS TERAPAN
Publisher : Politeknik Negeri Lhokseumawe

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30811/jmst.v10i2.10485

Abstract

Temperature control is a crucial factor in the coffee fermentation process, as it influences both microbial activity and the quality of the final product. This study aimed to design a heating unit based on a shell-and-coil heat exchanger, utilizing R32 refrigerant as the heat source for the water jacket system of a coffee fermentation bioreactor. The design was developed using the Log Mean Temperature Difference (LMTD) method and subsequently validated through Computational Fluid Dynamics (CFD) simulation using ANSYS Fluent. Calculations yielded a heating unit with a capacity of 137.4 L, a coil length of 22.02 m, and a heat transfer rate of 1,354 W. Simulation results showed the water temperature rising from 27°C to 48°C, while the refrigerant temperature dropped from 90°C to 69.9°C. The simulation results differed from the theoretical values by approximately 2°C, indicating that the design effectively meets the heating requirements of the water jacket system. This research demonstrates that utilizing heat from an air conditioner condenser with R32 refrigerant offers a potential alternative for an efficient heating system in coffee fermentation bioreactors.
Analisis distribusi temperatur reaktor gasifikasi downdraft multi-stage berbasis kontainer menggunakan simulasi termal Alvin Indi Lazuardi; Trisma Jaya Saputra; Nur Hayati; Arif Rahman Saleh
Jurnal Mesin Sains Terapan Vol 10, No 2 (2026): JURNAL MESIN SAINS TERAPAN
Publisher : Politeknik Negeri Lhokseumawe

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30811/jmst.v10i2.10458

Abstract

Coffee husk waste is a promising biomass resource for renewable energy production through gasification; however, its utilization remains relatively limited. This study aimed to design a container-based downdraft gasification reactor with a processing capacity of 50 kg/h and evaluate its thermal performance through temperature distribution analysis using SolidWorks Simulation. The reactor dimensions were determined based on stoichiometric calculations with an equivalence ratio (ER) of 0.3, resulting in a reactor diameter of 760 mm, a height of 1900 mm, a throat diameter of 234 mm, and a nozzle diameter of 34 mm. Thermal simulations were conducted under steady-state conditions using Stainless Steel (SS) 310S as the reactor material. The applied thermal loads were 269.651°C in the drying and pyrolysis zone, 759.150°C in the oxidation (throat) zone, 250.843°C in the reduction zone, and 140.045°C at the grate, with a natural convection boundary condition of 5 W/(m²·K). The results showed that the highest temperature of 759.150°C occurred in the throat region, while the maximum outer surface temperature reached approximately 59.566°C. The estimated convective heat loss to the surrounding environment was 0.78 kW, equivalent to only 0.31% of the biomass energy input, indicating that the selected SS 310S material and wall thickness configuration provided effective thermal insulation. These findings provide a practical reference for the design and thermal optimization of safe and efficient container-based biomass gasification reactors
Desain dan simulasi statik rangka alat sortir buah kopi Tegar Indarto; Nur Hayati; Arbye S. Arbye S.; Trisma Jaya Saputra; Arif Rahman Saleh
Jurnal Mesin Sains Terapan Vol 10, No 2 (2026): JURNAL MESIN SAINS TERAPAN
Publisher : Politeknik Negeri Lhokseumawe

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30811/jmst.v10i2.10475

Abstract

Manual coffee cherry sorting has limitations in terms of capacity, consistency, and efficiency, making it necessary to develop a sorting machine with a strong, safe, corrosion-resistant, and cost-effective structure. This study aims to design the frame of a coffee cherry sorting machine and determine the most suitable materials for the frame and hopper through static structural simulation. The design was developed using SolidWorks, while the structural analysis was conducted using SolidWorks Simulation based on the Finite Element Analysis (FEA) method to evaluate the von Mises stress, displacement, and Factor of Safety (FOS). The simulation results indicate that Galvanized Steel is the most suitable material for the machine frame, as it provides safe structural performance with maximum stress below the material’s yield strength, low displacement, and Factor of Safety that satisfies engineering safety requirement. In addition, Galvanized Steel offers better corrosion resistance and material cost efficiency than the other evaluated materials. For the hopper, Stainless Steel 201 demonstrated the best performance, achieving an excellent structural strength and corrosion resistance for coffee cherry handling applications. Based on the static simulation and cost analysis, Galvanized Steel is recommended as the frame material, while Stainless Steel 201 is recommended as the hopper material because they provide the best balance of structural strength, safety, corrosion resistance, and cost efficiency
Co-Authors Abdul Gafur Adipradana, Arrizka Yanuar Adiprana, Arrizka Yanuar Aditya Wahyu Ramadhan Agus Arianto, Agus Ahmad Fathoni Alfi Rahmi, Alfi Alvin Indi Lazuardi Aprizal Arbye S Ayub Adi Darmawan Bambang Sudarmanta Bambang Sudarmanta, Bambang Bariq Firmanda Brahmana Brahmana Budiono, Herru Santosa Cisilia Sundari Depi Rustam Ependi Dewi, Rany Pupita Dewi, Rany Puspita Dinar Melani Hutajulu Eny Boedi Orbawati Eti Meirina Fadlurrahman, Fadlurrahman Farida Yunita Farikah Fatkhurrochman, Fatkhurrochman Fuad Hilmy Galih Sigit Setiadi Hamzah Fansuri Ibnu Rosyid Ridwana Ika Daruwati, Ika Iqbal Maulana Jalu Aji Prakoso Jayanto, Denni Bagus Jihad Lukis Panjawa Katarina Putri Maharani Khairul Fahmi Khresna Bayu Sangka Kun Suharno Kurniawana,, Akbar Maulia Siti Mukharohmah Mohammad Ali mahmudi Mohammad Apriniyadi Mubarok, Muhammad Khusni Muhammad Farid Mukti, Ari Nani - Mulyaningsih Nani dkk. Mulyaningsih Nelfandia, Naufal Fajran Nur Hayati Nurbaity Khoirun Nissa Nurmala Dyah Fajarningrum Pebri Akhrus Mahrun Puspitasari, Herlina Mega Putra, Yoga Anggara Raka Mahendra Sulistiyo Ramlan Manullang Rany Puspita Dewi Rindi Genesa Hatika robi yansyah robiyansyah, robi yansyah Seiren Ikhtiara Setiyawati, Tri Retno Shubhi, Achmad Solaahuddin Siana, Nezar Azali Sigit Joko Purnomo Sigit Mujiarto Suci Nasehati Sunaningsih Sulistyo, Raka Mahendra Taufik, Ikhwan Tegar Indarto Trisma Jaya Saputra Umam Nasrullah Wahid Nur Huda Wahyu Tri Apriliyan Wibawa, Barnabas Satria Yesinta Nanda Kurnia Yeza Febriani Yose Rizal Yose Rizal, MT, Yose Rizal