Garuda - Garba Rujukan Digital

p-Index From 2020 - 2025

6.509

P-Index

This Author published in this journals

All Journal International Journal of Science and Engineering (IJSE) TEKNIK Rotasi Sainteknol : Jurnal Sains dan Teknologi Jurnal Teknologi Rekayasa Mesin Sinergi Prosiding Semnastek DINAMIKA Jurnal Ilmiah Teknik Mesin JTT (Jurnal Teknologi Terpadu) Teknika: Engineering and Sains Journal JRST (Jurnal Riset Sains dan Teknologi) RESISTOR (Elektronika Kendali Telekomunikasi Tenaga Listrik Komputer) Prosiding Semhavok Jurnal Pengabdian Masyarakat Teknik Journal of Applied Sciences and Advanced Technology BASKARA: Journal of Business and Entrepreneurship Indonesian Journal of Computing, Engineering, and Design ABDI MOESTOPO: Jurnal Pengabdian pada Masyarakat Mechanical Engineering for Society and Industry Automotive Experiences Jurnal Teknik Mesin Mechanical Xplore Borobudur Engineering Review Aceh International Journal of Science and Technology

Anwar Ilmar Ramadhan

Jurusan Teknik Mesin, Fakultas Teknik, Universitas Muhammadiyah Jakarta, Indonesia

Author-ID : 356952

Aerospace Engineering Agriculture, Biological Sciences & Forestry Arts Humanities Automotive Engineering Chemical Engineering, Chemistry & Bioengineering Chemistry Civil Engineering, Building, Construction & Architecture Computer Science & IT Control & Systems Engineering Decision Sciences, Operations Research & Management Earth & Planetary Sciences Economics, Econometrics & Finance Electrical & Electronics Engineering Energy Engineering Environmental Science Industrial & Manufacturing Engineering Materials Science & Nanotechnology Mechanical Engineering Social Sciences Transportation Other

Published : 106 Documents Claim Missing Document

Claim Missing Document

Articles

5 6 7 8 9

Analysis Structure and Function Cooling System on Unit D155A-6 Hasan Basri; Anwar Ilmar Ramadhan; Ery Diniardi
Journal of Applied Sciences and Advanced Technology Vol 1, No 2 (2018): Journal of Applied Sciences and Advanced Technology
Publisher : Faculty of Engineering Universitas Muhammadiyah Jakarta

As time went on many problems were encountered in the unit, one of which was the problem experienced by the D155A-6 unit, which was overheating troubleshooting caused by abnormal fan motors. In handling the problem, it is difficult to determine the data of the motor fan. Therefore, an initiative is needed to create tools to help deal with problems that occur. The purpose of this study is the manufacture of adapter tools for measurement of hydraulic pressure fan motors in troubleshooting the overheat engine in D155A-6 units. The results of this study are analyzing the structure and function of the cooling system in troubleshooting the overheat engine in the D155A-6 unit.

Mechanical Properties of Particle board from Empty Palm Fruit with Polyester Resin Adhesive Istianto Budhi Rahardja; Hayya Afifah; Yudi Dermawan; Ery Diniardi; Anwar Ilmar Ramadhan; Januar Parlaungan Siregar
Journal of Applied Sciences and Advanced Technology Vol 4, No 1 (2021): Journal of Applied Sciences and Advanced Technology
Publisher : Faculty of Engineering Universitas Muhammadiyah Jakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24853/jasat.4.1.35-42

The need for particleboard in Indonesia is increasing every year. Particleboard is usually made of wood that comes from the forest so it has a bad effect and forest products will decrease over time. To overcome this problem, new knowledge is created that can be done. The new knowledge is like utilizing empty palm oil bunches for particle board material to replace wood raw materials. Particleboard is usually made of wood or other lignocellulosic materials such as oil palm empty bunches. The empty fruit bunches that have been made will be mixed with polyester resin as an adhesive. This study examines the effect of the percentage of polyester resin adhesive used, namely 90%, 75% and 60%. The process of making particle board starts with the preparation of raw materials such as palm empty fruit bunches and polyester resin. For empty bunches fiber used is 1 cm long. After the particle board is made, a hardness test is carried out using a durometer with the ASTM D2240 standard.

Crystal Exergy Value (Wax) Crude Palm Oil (CPO) Influence Based On The Mixed Type Istianto Budhi Rahardja; Rulan Dinary; Anwar Ilmar Ramadhan
Journal of Applied Sciences and Advanced Technology Vol 1, No 3 (2019): Journal of Applied Sciences and Advanced Technology
Publisher : Faculty of Engineering Universitas Muhammadiyah Jakarta

Liquid wax (wet wax) is a source of heat energy and lighting produced from palm oil to provide illumination where needed. The need for candles is used for lighting the environment, the place, and the heating of the objects for need. The manufacture of liquid candles is to provide the base oil of crude palm oil mixed evenly in the melting point of solid paraffin. Paraffin and CPO are melted together and placed, then cooled. The wax ignition process produces heat and light. Results that can be shown with a comparison between palm oil and solid paraffin will produce hardness, texture, and flame ignition. With 50 grams of paraffin, 50 gr CPO and 1 kg of oxygen (1: 5) of the fuel of 250 gr O2, will produce 1300 gr CO2, 1175gr H2O, -1487,5 gr O2 and 940 gr N2. Different paraffin granules, will produce the same product in energy balance, while the value of N2 remains. Experimental value from mixing CPO and paraffin by 50 gr: 50 gr yielding entropy generation (S gen) and CPO wax exudo of 257.16 kJ / kmol.K and 77,918.67 kJ/kmol and its value decreases based on paraffin administration

Troubleshooting Blow by Pressure High on the Komatsu Bulldozer Unit D375A-6R Hasan Basri; Ery Diniardi; Anwar Ilmar Ramadhan
Journal of Applied Sciences and Advanced Technology Vol 2, No 1 (2019): Journal of Applied Sciences and Advanced Technology
Publisher : Faculty of Engineering Universitas Muhammadiyah Jakarta

PT United Tractors Tbk Loajanan-sanga site backs up a large number of customers, one of which is PT. RCI (RPP Contractors Indonesia) which is engaged in coal mining with the Komatsu D375A-6R unit which is used for dozzing and ripping. From the D375A-6R unit at PT. RCI experienced Troubleshooting on engines which caused Blow by pressure high, which resulted in the engine low power and could not run because the oil engine continuously exited from the oil engine filling hole, if the engine is forced to operate it is feared that the engine oil will run out and the engine components it will experience excessive wear and can also experience jammed which results in the maximum performance of the D375A-6R komatsu unit.

Analysis of Heat Transfer of Fiber Mesocarp of Palm Oil (Elaeis Guineensis Jacq) as Roof Building Istianto Budhi Rahardja; Rikman Rikman; Anwar Ilmar Ramadhan
Journal of Applied Sciences and Advanced Technology Vol 1, No 1 (2018): Journal of Applied Sciences and Advanced Technology
Publisher : Faculty of Engineering Universitas Muhammadiyah Jakarta

Palm oil fibers are waste products from Palm Oil Mill which is in the form of debris, solid, length of 3-4 cm, contained in coconut fruit (mesocarp) meat. Fiber roof building is the result of utilization of palm fiber waste as a roof of a building that is used to reduce heat from sunlight or from heat sources, so it is not directly exposed to humans and the surrounding environment. Fiber roof building is made by arranging the fiber in the mold and arranged in accordance with the dimensions to be made. To bind between fibers, used resin that has been mixed with the catalyst material, so easy to dry quickly. The ratio between resin and fiber is 1: ¼. The result of conduction heat conduction test that has been done on the fiber test object can reduce the highest heat of 125 °C and the lowest is 109 °C from the given heat source of 200 °C. This shows that palm fiber can be used as a heat reducer for buildings.

Analysis of the Effect of Cutting Variables against Surface Hardness Ery Diniardi; Sri Anastasia Yudistirani; Hasan Basri; Anwar Ilmar Ramadhan
Journal of Applied Sciences and Advanced Technology Vol 3, No 3 (2021): Journal of Applied Sciences and Advanced Technology
Publisher : Faculty of Engineering Universitas Muhammadiyah Jakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24853/jasat.3.3.81-88

Indonesia is one of the developing countries and is actively pioneering development, especially development in the industrial sector. The industry that is quite developed at this time is the manufacturing industry which produces a finished product that can be directly used by consumers. These products are expected to have a high enough quality level so that they can compete in the market. To support this quality, one of the factors is to pay attention to the level of precision of the workpiece in this case is the level of surface roughness of the object or product produced. The surface roughness value is obtained from the tests carried out on the product which has an average surface value (Ra) and a maximum roughness value (Ry). To achieve the desired roughness value, it is necessary to make improvements in metal forming work. In the variable cutting with variations in cutting speed, it is said that the cutting speed on work with smaller diameter objects should use a high cutting speed. Feeding thickness that is too large can cause high surface roughness values and high rotation at low cutting speeds to produce a smooth surface but takes a long time. With the selection of the speed of ingestion that varies for the price of the ingestion speed of 43.52 m/minute, the surface roughness value is 6.78 m, the speed is 48.32 m/minute, the surface roughness value is 3.64 m and the ingestion speed is 59.25 m. /min the surface roughness value is 6.14 m. Meanwhile, for the infeed thickness which varies for a feed thickness of 1.2 mm, the surface roughness value is 4.06 m; a feed thickness of 2.4 mm obtained a surface roughness value of 27.82 um and a feed thickness of 3.2 mm obtained a surface roughness value of 7.02 m.

Identification of Palm Oil Mill Throughput Capacity of 60 tons/hour (Case Study at XYZ Palm Oil Mill) Istianto Budhi Rahardja; Sulistiono Sulistiono; Anwar Ilmar Ramadhan
Journal of Applied Sciences and Advanced Technology Vol 2, No 3 (2020): Journal of Applied Sciences and Advanced Technology
Publisher : Faculty of Engineering Universitas Muhammadiyah Jakarta

Throughput is the ability of a company's production unit to process raw materials into final products that have value, in accordance with established standards. Palm Oil Mill (PKS) is a processing company for raw materials in the harvest of palm oil in the form of Fresh Fruit Bunches processed into Crude Palm Oil (CPO) and Palm Kernel Oil (PKO) products and their by-products in the form of solid waste (empty bunches, fiber, shells) and liquid. PKS production can be achieved throughput produced by looking at the production process that occurs in each work unit, namely: the value of the capacity of the stew is done, sequencing time, steam boiler requirements, Material Balance. The capacity owned by PKS XYZ is 60 tons/hour, does not meet the targeted throughput, where the sterilizer capacity is only able to reach 45 tons/hour, sequencing time is 45 minutes, the steam boiler produced is not sufficient to produce 60 tons of PKS/hour, and the existing Material Balance is not met, which are 38 tons/hour.

Design of Water Heating By Utilizing Waste Heat of Air Conditioner Hasan Basri; Ery Diniardi; Anwar Ilmar Ramadhan
Journal of Applied Sciences and Advanced Technology Vol 3, No 3 (2021): Journal of Applied Sciences and Advanced Technology
Publisher : Faculty of Engineering Universitas Muhammadiyah Jakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24853/jasat.3.3.89-96

This plan aims to minimize wasted energy in the air freshener system and utilize the wasted energy to heat water. Here using a split type air conditioner system which is commonly used. The author slightly modified the air conditioning system which previously used an air conditioning condenser, here the author added a condenser with a water cooler that functions as a condenser and at the same time as a water heater. The energy used to heat the water is obtained from the heat released by the refrigerant so as to minimize the energy wasted when only using an air conditioning condenser. But the air conditioning condenser is still used in this system, because when hot water is not needed, the water in the heater does not flow and of course cannot take heat from the refrigerant. In this condition the air conditioning condenser can work to help the process of releasing heat from the refrigerant. This tool can heat water up to 43oC with a flow rate of 1 liter per 9 seconds which can be used at home, SOHO, office for bathing, washing face, washing hands, etc.

Analysis of the Potential for Savings in Electrical Energy Consumption in Lifts: Case Study in Indonesia Deni Almanda; Anwar Ilmar Ramadhan
Journal of Applied Sciences and Advanced Technology Vol 3, No 1 (2020): Journal of Applied Sciences and Advanced Technology
Publisher : Faculty of Engineering Universitas Muhammadiyah Jakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24853/jasat.3.1.29-34

Regenerative Drive is a motor drive system in an elevator that can also generate electrical energy while consuming electrical energy in the elevator machine, Regenerative Drive converts gravitational potential energy into electrical energy by utilizing the operating characteristics of the lift and the weight difference between the lift cage and the load balancing (Counterweight). ). The resulting regenerative power is recovered by returning to the building electricity and being used in other electrical equipment. Regenerative drive lift test location is located in Building which has an elevator using Regenerative Drive. With a motor power of 38.6 kW and can produce regenerative power of 29 kW.

Impact of Event Indonesia Fashion Week to Wardah's Brand Sa'diyah El Adawiyah; Alfa Taufan Latif; Anwar Ilmar Ramadhan
BASKARA : Journal of Business and Entrepreneurship Vol 3, No 1 (2020): Baskara: Journal of Business and Entrepreneurship
Publisher : Universitas Muhammadiyah Jakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.54268/baskara.3.1.47-53

Indonesia Fashion Week Event (IFW) is a movement in the fashion sector initiated by the Indonesian Fashion Designers Association (APPMI). This movement aims to make Indonesia as one of the world's fashion centres. This event held regularly every year since 2010. This event is Wardah's event as one of the famous cosmetic brands to increase awareness. This study aims to measure how much influence the Indonesia Fashion Week (IFW) Event on Wardah's Image is in the Jabodetabek Hijabers Community. The theory used in this study is the theory of public relations, the theory of events and the theory of image. This study uses a quantitative approach to analytical methods. This method is to examine the influence between Variables (X) and Variables (Y). Data collection techniques using questionnaires distributed in Hijabers Community using accidental sampling techniques. From the results of research and discussion, it can see that the dimensions of Perishability at the Indonesia Fashion Week event have the lowest average value among the four other variables 73.6%. Which means that the Indonesia Fashion Week event schedule does not have an event schedule must adjust to the target visitors and participant following the theme carried. Besides, the results of the second study that Wardah's Image is in the "Good" category. It proves from the results of the comparison of the results obtained with the achievement value of 82.3%. The results of the third study, the Indonesia Fashion Week 2018 event was able to increase Wardah's image in the Jabodetabek Hijabers Community. Based on the calculation of the Determinant Coefficient, the value of the Indonesia Fashion Week Event is 0.3169 or 31.69%. The Indonesia Fashion Week Event influences Wardah's image at 31.69%, and other variables determine the remaining 68.31%.

Co-Authors Abduh Al Afghani Abrori, Muhammad Reza Achmad Nuril Fajar Adawiyah, Sa'diyah El Ade Muslimat Aditya Firmanto Agung Julianto Agung Siswahyu Ahdiat Leksi Siregar Ahmad Fauzi Ahmad Yakub Ahmad Yakub, Ahmad Akmal Imam Faisal Alfa Taufan Latif Alvika Meta Sari Amri Abdulah Anggoro Septilarso Annisa Mulia Rani Annisa Mulia Rani Aryadi Suwono As Natio Lasman As Natio Lasman Azhari, Azmir Azmairit Aziz Azmi, Wan Hamzah Bambang Setiawan Boy Setiawan Choirul Anwar Dalil Sumiyarsono, Dalil Daruki Daruki Dede Erland Ramadhan Deni Almanda Deni Almanda Deni Almanda Dermawan, Erwin Dharu Dewi Dhian Trisnadi Setyawan Diah Safitri Ningrum Dicky Dimyati Dino Rimantho Djoko Hadi Prajitno Djoko W Karmiadji Djoko W Karmiadji Dodi Mulyadi Dyota, Arya Smara edy susanto Efrizon Umar Efrizon Umar Efrizon Umar Efrizon Umar Efrizon Umar Eka Revi Ruswandi Eka Revi Ruswandi, Eka Revi Eko Kiswoyo Erwin Dermawan Erwin Dermawan Erwin Dermawan Erwin Dermawan Erwin Dermawan Erwin Dermawan Ery Diniardi Ery Diniardi Ery Diniardi Ery Diniardi Ery Diniardi Ery Diniardi Ery Diniardi Ery Diniardi Ery Diniardi Ery Diniardi Fachri Amrulloh Fadliondi Fahmi Al Diansyah Faisal, Akmal Imam Fathan Mubina Dewadi Fatma Sari Fikri, Muhamad Rausyan Fikriyansyah Fikriyansyah Fikriyansyah, Fikriyansyah Firmansyah Firmansyah Firmansyah Firmansyah Fitriana, Rian Frisca Amalia Ummay Govinda Gatot Aditya Hadisujoto, Ignatius Budi Sutanto Hasan Basri Hasan Basri Hasan Basri Hasan Basri Hasan Basri Hasan Basri Hasan Basri Hasan Basri Hasan Basri Hasan Basri Hasan Basri Hasan Basri Hayya Afifah Hendra Saputra Idhar Mahasen Indra Setiawan Indriasari Indriasari Iphov Kumala Sriwana Irwan Firmansyah Ismiyati Ismiyati Istianto Budhi Rahardja Istianto Budhi Rahardja Istianto Budhi Rahardja Istianto Budhi Rahardja Istianto Budhi Rahardja Iwan Setiawan Januar Parlaungan Siregar Juni Afriani Juniasih, Octarina Adiati Kamila, Fatima Tasya Khoirudin Khoirudin Khoirudin Khoirudin Kisman H Mahmud Korada Viswanatha Sharma Kushendarsyah Saptaji M Al-Haramain M. Ivan Satryo Manasikana, Dinda Arina Maya Dewi Dyah Maharani Mohd Amiruddin Fikri Mohd Fairusham Ghazali Mohd Hamisa Abdul Hamid Mohd Zawawi, Nurul Nadia Muchamad Oktaviandri Muhammad Arifangga Muhammad Arifangga, Muhammad Muhammad Dadi Saputra Muhammad Daroji Muhammad Reza Abrori Muhammad Reza Abrori, Muhammad Reza Muhammad, Azka Aulia Mulyadi Mulyadi Murtalim Mushoffa Ali Firdaus Mushoffa Ali Firdaus, Mushoffa Ali Mutiara Salsabila N Nelfiyanti Nana Rahdiana Nana Rahdiana Nana Rahdiana Natayu, Amartya Nathanael Tandian Nur Yulianti Hidayah, Nur Yulianti Nurrochman, Taufik Nurul Hidayati Fithriyah Nurul Nadia Mohd Zawawi Pratomo, Vector Anggit Rahardja, Istianto Budhi Rahmawati Suryani Ramadhani, Mochammad Rafli Rantawi, Azhar Basyir Raslan A. Alenezi Rasma Rasma Rasma Rasma Ratri Ariatmi Nugrahani Rian Fitriana Ricko Valderama Ridhwan Adhitya Ibnimatiin Rikman Rikman Riza Samsinar Rizalman Mamat Rizkyta, Velia Ayu Roni Muhammad Susanto Rudiatin, Endang Rulan Dinary Rulan Dinary Runik Machfiroh Safril Safril Safril Sasi Kirono Semendo, Rifqi Putra Setiawan, Hanif Rama Yuda Sharifah Norsakinah Syed Zainal Abidin Sharma, Korada Viswanatha Shieddique, Apang Djafar Siregar, Ahdiat Leksi Sitti Nurbaya Ambo Sony Hari Mukti, Sony Hari Sukarman Sukarman Sukarman Sukarman Sukarman Sukarman Sukarman Sukarman Sukarman Sulis Yulianto Sulistiono Sulistiono Sumanto Suripto, Heri Suroto Munahar Susanto, Roni Muhammad Syawaluddin Syawaluddin Syawaluddin Syawaluddin Syawaluddin Syawaluddin Syawaluddin Syawaluddin Syawaluddin Syawaluddin, Syawaluddin Syawaluddin, Syawaluddin Sylvia Madusari Taufik Nurrochman Thomas Djunaedi Tri Yuni Hendrawati Tri Yuni Hendrawati Tri Yuni Hendrawati Triawan, Farid Trisnadewi, Titin Tumada, Azhari Waldi Isnaini Wan Hamzah Azmi Wan Hamzah Azmi Wiwik Sudarwati Wiwit Kartika Sari Yudi Dermawan Yudistirani, Sri Anastasia Yuli Panca Asmara Yusuf Yusuf

Title

Found 106 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 106 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 106 Documents
Search