Claim Missing Document
Check
Articles

Found 33 Documents
Search

Analysis of Electrical Energy the Effect of Using a Smartphone-Based Water Pump Control System Controller (Case Study of Yulihamri's Rent at Merak Sakti Road) Antonius Rajagukguk; Iman Sahrobi Tambunan; Anhar Anhar; Alfian Ma'arif
Jurnal Ilmiah Teknik Elektro Komputer dan Informatika Vol 8, No 3 (2022): September
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26555/jiteki.v8i3.23659

Abstract

The development of science and technology will increasingly have an impact on human life, especially electronic devices at home. In-home reservoirs, commonly, the owner of the water pump cannot detect the level of the water reservoir in his house due to no automation in the water pump. This study seeks to design a device that can control one water pump for filling three reservoirs, where the reservoir filling path will be regulated by a solenoid valve. It also aims to increase the efficiency of electrical energy in the water pump and be monitored by homeowners. The research was conducted at Yulihamri's rented house on Merak Sakti Road. In testing the measurement of electrical energy without using a control, the results obtained in the first reservoir of 1253.99 Wh, 2072.83 Wh, and 2136.27 Wh in the first, second, and third reservoirs, respectively. Meanwhile, in testing the measurement of electrical energy using the control system, the results obtained on all reservoirs in sequence are 1234.70 Wh, 1754.52 Wh, and 1644.12 Wh. The electric energy efficiency of the water pump after using the control system enhance by 15%. The contribution of this research is to reduce the use of excessive electrical energy due to the filling of water that exceeds the storage capacity so as to make it inefficient for the use of electrical energy as well as the water released. The research also limits the use of electrical energy at the end of the month, which makes this system more efficient compared to other systems.
Implementasi Virtual Tour JTE UNRI Menggunakan Kombinasi Foto Panorama Dan Rekayasa 3D Edi Susilo; Rahmat Rizal Andhi; Febrizal Ujang; Anhar Anhar
Infotek: Jurnal Informatika dan Teknologi Vol. 6 No. 1 (2023): Infotek : Jurnal Informatika dan Teknologi
Publisher : Fakultas Teknik Universitas Hamzanwadi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29408/jit.v6i1.7456

Abstract

Media information has a very important role in efforts to attract prospective students to join. A website needs to be improved in the era of large technological developments. One of the new information media that utilizes the latest technology is a virtual tour. If you look at some of the previous ones, making a virtual tour can be made using panoramic photos made with image stitching techniques from many photos and can also use 3-dimensional engineering results. Both ways have their advantages and disadvantages. In this study, we will combine panoramic photos and 3D engineering to create a virtual tour of the Department of Electrical Engineering, Riau University. Virtual tour created using an equirectangular image base. There are 10 locations included in the virtual tour which four of them use panoramic photos and the remaining six places use 3D engineering. Four panoramic photos and six 3D-engineered equirectangular shapes are combined into one virtual tour. To validate the results of combining panoramic photos and 3D engineering into a virtual tour, user experience testing was conducted using a user experience questionnaire. User experience questionnaire was  distributed to 30 respondents. As a result, four scales are in the excellent category: attractiveness, dependability, stimulation, and novelty. Then two scales are included in the good category, namely perspicuity and efficiency, which get a value of 1.78. From the user experience perspective, virtual tours resulting from a combination of panoramic photos and 3D engineering in general can be considered very good. Then this combination of panoramic photos and 3D engineering can be used as a solution for virtual tour documentation if several locations are inadequate to document
Detection of COVID-19 Based on Synthetic Chest X-Ray (CXR) Images Using Deep Convolutional Generative Adversarial Networks (DCGAN) and Transfer Learning Anhar Anhar; Dandi Septiandi
Jurnal Ilmiah Teknik Elektro Komputer dan Informatika Vol 9, No 3 (2023): September
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26555/jiteki.v9i3.26685

Abstract

The global COVID-19 pandemic has significantly impacted the health and lives of people worldwide, with high numbers of cases and fatalities. Rapid and accurate diagnosis is crucially important. Radiographic imaging, particularly chest radiography (CXR), has been considered for diagnosing suspected COVID-19 patients. CXR images offers quick imaging, affordability, and wide accessibility, making it pivotal for screening. However, the scarcity of CXR images remains due to the pandemic's recent emergence. To address this scarcity, this study harnesses the capabilities of Deep Convolutional Generative Adversarial Networks (DCGAN). DCGAN is a convolution-based GAN approach, has the potential to alleviate the scarcity of CXR data by generating authentic-looking synthetic images. This study combines synthetic CXR images with real CXR images to bolster model performance, resulting in an Extended Dataset. Extended Dataset comprises 7,345 images, with 34.63% being original CXR images and 65.37% being synthetic images produced by DCGAN. Expanded Dataset then utilized to train three pre-trained models: ResNet50, EfficientNetV1, and EfficientNetV2. The outcomes are remarkable, showcasing considerable enhancement in detection accuracy. Especially for the EfficientNetV1 model, it takes the lead with an impressive accuracy of 99.21% after merely ten epochs, achieved within a brief training period of 6.18 minutes. This surpasses the prior accuracy of 98.43% observed when used the Original Dataset (without synthetic CXR images). Overall, this research offers a solution to mitigate the scarcity of synthetic CXR images for COVID-19 detection. For future endeavors, refining the quality of synthetic images stands as an area for exploration, enhancing the overall efficacy of this approach.
Smart Fish Farm: Smart Feeding Berbasis Internet of Things pada Budidaya Ikan Patin Siam Anhar Anhar; Risky Yonanda Hafiz; Nurhalim Nurhalim; Firdaus Firdaus
Voteteknika (Vocational Teknik Elektronika dan Informatika) Vol 11, No 4 (2023): Vol. 11, No 4, Desember 2023
Publisher : Universitas Negeri Padang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24036/voteteknika.v11i4.125594

Abstract

Pada penelitian ini dirancang sebuah alat pemberi pakan ikan otomatis berbasis IoT (Internet of Things) yang dapat memberikan pakan sesuai jadwal dan kebutuhan nafsu makan ikan kemudian memberikan notifikasi ketika pakan telah berhasil diberikan. Alat yang di rancang juga didukung dengan sebuah database yang mampu menyimpan seluruh riwayat pemberian pakan. Setelah dilakukan pengujian maka dapat disimpulkan alat bekerja dengan baik karena dapat memberikan pakan secara otomatis sesuai jadwal dan kebutuhan nafsu makan ikan serta mengirimkan dan menyimpan data hasil pemberian pakan. Secara menyuluruh alat juga dapat dikatakan akurat karena memiliki persentase rata rata error yaitu dibawah 1%.Kata kunci : IoT, Otomatis, Ikan Patin, Budidaya In this research, an automatic fish feeder device based on IoT (Internet of Things) is designed to provide feed according to the schedule and the fish's appetite needs and to send notifications when the feed has been successfully given. The designed device is also supported by a database that can store the entire history of feedings. After conducting tests, it can be concluded that the device works well because it can provide feed automatically according to the schedule and the fish's appetite needs, and it can send and store data on feedings. Overall, the device can be considered accurate as it has an average error percentage of less than 1%. Keywords: IoT, Automatic, Catfish, Aquaculture.
Sistem Penjadwalan Perkuliahan Menggunakan Algoritma Genetika Pada Jurusan Teknik Elektro Universitas Riau Adinda Lestari; Edi Susilo; Anhar Anhar
Jurnal Teknologi Informatika dan Komputer Vol. 9 No. 2 (2023): Jurnal Teknologi Informatika dan Komputer
Publisher : Universitas Mohammad Husni Thamrin

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37012/jtik.v9i2.1679

Abstract

Jurusan Teknik Elektro adalah salah satu jurusan yang dalam proses pembuatan jadwal perkuliahan masih menggunakan cara manual yaitu menggunakan Microsoft Excel dan belum memiliki sistem yang dapat mengoptimalkan proses pembuatan jadwal tersebut. Banyaknya parameter dalam pembuatan jadwal, jumlah dosen dan ruang kelas yang terbatas, adanya kriteria-kriteria penjadwalan, serta tidak meratanya jadwal dosen merupakan permasalahan pada penelitian ini sehingga proses penjadwalan menggunakan cara manual menjadi tidak efektif. Untuk mengatasi permasalahan pernjadwalan tersebut, penulis mengambil penelitian tentang perancangan Sistem Penjadwalan Perkuliahan Menggunakan Algoritma Genetika pada Jurusan Teknik Elektro Universitas Riau. Penelitian ini menerapkan metode algoritma genetika dalam pembuatan jadwal mata kuliah. Pada sistem penjadwalan ini menggunakan metode pengembangan sistem prototype. Metode prototype yang digunakan pada penelitian ini terdiri dari tiga tahapan yaitu Analisis Kebutuhan, Pembuatan Prototipe, dan Pengujian. Berdasarkan pengujian functionality yang telah dilakukan, diketahui bahwa nilai X = 1 yang berarti fitur dan fungsi-fungsi yang terdapat pada sistem penjadwalan perkuliahan ini berhasil 100% dan berdasarkan pengujian parameter oleh expert, bahwa algoritma genetika berhasil memecahkan permasalahan tersebut dengan pembuatan jadwal yang sudah sesuai dengan kriteria-kriteria penjadwalan, interval waktu yang merata pada setiap dosen, dan waktu yang digunakan dalam pembuatan jadwal lebih cepat dibandingkan dengan pembuatan jadwal secara manual, namun masih terdapat bentrok pada ruangan.
Analysis of LTE Network Quality of Service on Streaming Application Putri, RA Rizka Qori Yuliani; Anhar, Anhar; Al Nazen, Aguinaldo; Setiawan, Aris; Kholik, Dede Abdul
International Journal of Electrical, Energy and Power System Engineering Vol. 6 No. 2 (2023): The International Journal of Electrical, Energy and Power System Engineering (I
Publisher : Electrical Engineering Department, Faculty of Engineering, Universitas Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31258/ijeepse.6.2.151-155

Abstract

QoS (Quality of Service) measurement of LTE (Long Term Evolution) networks is carried out using the Telkomsel provider. Measurements were made in Perawang, Riau at night. QoS measurements are carried out at Perawang to evaluate and monitor network quality in accessing vidio streaming services provided by the Telkomsel network in the Perawang, Riau. Measurements were aimed at 5 streaming applications, namely YouTube, RCTI+, Online Radio, Twitch, and Vidio. The reason 5 applications are used for QoS measurement is that these applications are popular applications used in the category of Vidio streaming applications. Measurements were carried out for 160 seconds. The measurement results will be analyzed for quality based on the TIPHON standard. The results were obtained by calculating the data that has been obtained by Wireshark. The data will be calculated using the existing equations. Twitch is the only application that has a value of four in the QoS parameter index category and has a QoS value with an excellent index category. 4 other applications have a QoS value with a good index category. This is due to the low value of the throughput index category. Online Radio and Vidio applications have an index category value of 0. YouTube and RCTI+ applications have a throughput index category value of 1 and 2 respectively. For jitter, packet loss, and delay values, 5 streaming applications have an excellent index category with a value of 4. The measurement results that have been obtained would be displayed in the form of tables and graphs.
QoE Analysis of Open Access Network at the University of Riau Anhar, Anhar; Putri, Sonia Maharani
International Journal of Electrical, Energy and Power System Engineering Vol. 6 No. 3 (2023): The International Journal of Electrical, Energy and Power System Engineering (I
Publisher : Electrical Engineering Department, Faculty of Engineering, Universitas Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31258/ijeepse.6.3.183-188

Abstract

This journal outlines a QoE network analysis conducted through both subjective and objective methods. The subjective approach involved the distribution of questionnaires via Google Forms to Riau University students using open access network, while the objective method utilized open access network in the Engineering Faculty Lobby and the Riau University Library, facilitated by the Google LightHouse tool. This analysis extended over a span of five days, encompassing morning, afternoon, and evening measurements, focusing on five web-based applications: YouTube, Facebook, WhatsApp, Instagram, and the Riau University Portal. The parameters assessed included Performance, Accessibility, Best Practices, and SEO. The QoE measurement results were presented in both tabular and graphical formats. The subjective method yielded a MOS value of 3.45, classifying it as "quite good." Meanwhile, when using the objective method in the open access network in the Lobby of the Faculty of Engineering, the average performance was 46.86, placing it in the "bad" category. In the UNRI Library location, the average performance was 48.2, also categorized as "bad." However, for other parameters, the average scores exceeded 50, falling into the "Fair" and "Good" categories.
Analysis of 5G Network Quality of Service on VoIP Application Yuliani Putri, R.A Rizka Qori; Anhar, Anhar; Saputra, Anggi; Caniago, Rama Putra; Harianja, Rosarindo
International Journal of Electrical, Energy and Power System Engineering Vol. 7 No. 1 (2024): The International Journal of Electrical, Energy and Power System Engineering (I
Publisher : Electrical Engineering Department, Faculty of Engineering, Universitas Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31258/ijeepse.7.1.37-45

Abstract

Based on the results of the research conducted, it can be concluded that the 5G network at Airport shows excellent performance in supporting the use of VoIP applications such as Instagram, WhatsApp, and Zoom. This is indicated by a consistent category 4 index on all measured parameters, namely throughput, packet loss, delay, and jitter. In terms of throughput, although there are variations between the three apps, all values are still sufficient to support voice and video calls with good quality. In fact, the lower throughput value on the Zoom app does not mean that the video call quality is poor, especially for one-on-one calls or with few participants. Furthermore, the absence of packet loss in all three applications indicates excellent connection stability. This is an important indicator showing that all the data sent and received by the apps made it to their destination without being lost midway, which is essential for ensuring clear voice and video quality. Meanwhile, very low delay and jitter indicate that data transmission is fast and consistent. This is especially important for real-time communications such as video calls, where delays or variations in the arrival time of data packets can disrupt call quality. Overall, the results of this study show that the 5G network at Airport is capable of supporting the use of VoIP applications with good quality. This is an important finding, given the importance of VoIP in everyday life, both for personal and professional communication. Therefore, this research hopes to make an important contribution in understanding and maximizing the potential of 5G network in supporting VoIP communication at Airport.
Interference Analysis of Weather Radar at The Meteorological Station mahmudi, muhamad nur; Anhar, Anhar; Panjaitan, Hatopan; Rosadi, Feby
International Journal of Electrical, Energy and Power System Engineering Vol. 7 No. 2 (2024): The International Journal of Electrical, Energy and Power System Engineering (I
Publisher : Electrical Engineering Department, Faculty of Engineering, Universitas Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31258/ijeepse.7.2.122-129

Abstract

This research aims to analyze the disturbances that occur at the Sultan Syarif Kasim II Meteorological Station Weather Radar and provide appropriate treatment to stop the source of the disturbance. For this reason, the following steps are arranged: Literature studies, preparation for mitigating interference, measurement, interference analysis, and interference resolution. After applying measurements, the following results were obtained: The interference location point is on the azimuth line (8.07° and 37.84°), Noise floor level -107.3 dBm at a frequency of 6500 MHz when SSID PermanaNET#02 5825 MHz is on, noise floor level -111.1 dBm at a frequency of 6500 MHz when SSID PermanaNET#02 5825 MHz is off, distance between BMKG Radar station to Point of Presence (PoP) ISP PT. Medianusa Permana is very close ±200 meters, antenna SSID PermanaNET#02 5825 MHz pointing to the BMKG Radar Station, and sensitivity of the EEC DWSR–2500C Radar Device is -113 dBm. Interference at the 6500 MHz radar frequency comes from the Out Of Band Emission frequency 5825 MHz (SSID PermanaNET#02). Following this, the interference is mitigated by the off-air method, which is deactivation of the PermanaNET SSID#02 device.
Simulasi dan Realisasi Microstrip RF Amplifier 9,3 GHz Untuk Radar Pantai RAHAYU, YUSNITA; RITONGA, NICOLAS PEDRO; MAULANA, YUDI YULIYUS; SAPUTERA, YUSSI PERDANA; SANTIKO, ARIEF BUDI; ANHAR, ANHAR
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 12, No 1: Published January 2024
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v12i1.216

Abstract

ABSTRAKIndonesia merupakan negara kepulauan yang membutuhkan kemandirian teknologi radar pantai untuk keperluan pengawasan. Maka, kebutuhan akan RF amplifier yang murah merupakan suatu keharusan. Makalah ini menyajikan simulasi dan realisasi microstrip RF amplifier menggunakan RT/Duroid 5580 dan teknik matching stub pada frekuensi 9,3 GHz. Teknik ini merupakan yang efektif untuk frekuensi tinggi dan mencocokkan impedansi dengan nilai imajiner. Komponen aktif MGF2407A dipilih dengan konfigurasi DC fixed bias. Dari hasil simulasi, RF amplifier yang diusulkan memiliki gain sebesar 10,318 dB, S11 sebesar -26 dB dan S22 sebesar -28 dB dengan kompresi P1dB sebesar 11 dBm. Namun, selama pengukuran, RF amplifier memberikan redaman akibat pengaruh penyolderan, short circuit, dan electro statis discharge. Untuk parameter terukur lainnya memenuhi persyaratan standar. Hal ini menunjukkan realisasi microstrip RF amplifier untuk frekuensi tinggi memiliki tingkat keberhasilan yang rendah.Kata kunci: radar pantai, penguat daya, matching stub, mikrostrip ABSTRACTIndonesia is an archipelagic country that needs to monitor its islands. For the independence of coastal radar technology, the need for low cost RF amplifiers is a must.This paper presents simulation and realization of microstrip RF amplifier used RT/Duroid 5580 and matching stub technique worked at 9.3 GHz. This matching technique is effective for high frequency and to match the impedance with imaginer value. The active component of MGF2407A was chosen with DC fixed bias configuration. From simulation, the proposed RF amplifier has gain of 10.318 dB, S11 of -26 dB and S22 of -28 dB with P1dB compression at 11 dBm. However, during the measurement, the RF amplifier provides attenuation due to soldering, short circuit, and electro statis discharge effects. For other measured parameters met the standard requirements. This demonstrates the low success rate of realizing microstrip RF amplifiers for high frequencies.Keywords: coastal radar, power amplifier, matching stub, microstrip
Co-Authors Adinda Lestari Adriansyah Aisha Gemala Jondya Al Nazen, Aguinaldo Alfian Ma’arif Ali Hanafiah Rambe Andhi, Rahmat Rizal anggi saputra Antonius Rajagukguk Antonius Rajagukguk Antonius Rajagukguk, Antonius Arief Budi Santiko, Arief Budi Caniago, Rama Putra Chandra Chandra Dandi Septiandi Dani Ali, Nurhalim Dhoifullah Ramadhan Dian Yayan Sukma Dimas Rama Aji Pangestu Edi Susilo Edi Susilo Elfrida Ratnawati Ery Safrianti Ery Safrianti Febrizal Ujang Feri Candra Firdaus Firdaus Firdaus Firdaus Firdaus Firdaus Fri Murdiya Hamdani, Eddy Harianja, Rosarindo Hilmun Syah Ronie Iman Sahrobi Tambunan Jesica Amanda Putri Juandi Juandi Khairul Umam Syaliman Kholik, Dede Abdul Lara Putri Utami Lestari, Adinda Linna oktaviana sari Linna Oktaviana Sari Linna Oktaviana Sari Lysbetti Marpaung, Noveri Mahmudi, Muhamad Nur Muhammad Alif Akbar Muhammad Firdaus Nestor Hasudungan Silaban, Nestor Hasudungan Norshakila Haris Noveri Lysbetti M Nurhalim Dani Ali Nurhalim Nurhalim, Nurhalim Panjaitan, Hatopan PUTRA, RAHMA ADI Putri, Sonia Maharani R.A Rizka Qori Yuliani Putri R.A Rizka Qori Yuliani Putri Rahyul Amri Rama Fadilah Reza Adetya Risky Yonanda Hafiz RITONGA, NICOLAS PEDRO Rizky Andi Putra Rosadi, Feby Rosma, Iswadi Hasyim Salpiana Salpiana Suherman Suherman Suwitno Suwitno Suwitno Suwitno, Suwitno Suwondo Suwondo SYAIFUL BAHRI Teguh Praludi Topik Teguh Estu Usep Sofyan Veni Yuherlina Putri, Veni Yuherlina Wahyu Aldiansyah Winggi Arafanaldy Yasmin, Angreany Yudi Yuliyus Maulana, Yudi Yuliyus Yusni Ikhwan Siregar Yusnita Rahayu Yussi Perdana Saputera