Articles
Analisis Manajemen Pemenuhan Pelanggan pada Industri Kecil Menengah Pembuatan Tas dan Bordir Menggunakan Pemodelan System Dynamics (Studi Kasus pada CV. Kurnia Jaya – Yogyakarta)
Rahmanto, Nurdin;
Hartono, Budi;
Tontowi, Alva Edy
Jurnal Manajemen dan Organisasi Vol. 2 No. 3 (2011): Jurnal Manajemen dan Organisasi
Publisher : IPB University
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (582.816 KB)
|
DOI: 10.29244/jmo.v2i3.14212
Small Medium Enterprise (SME) plays a strategic role in developing countries economy. Each of SMEs has unique strategy of order fulfillment management. This is influenced by factor dynamics influencing the system. The system characteristic becomes the inspiration to be studied furthermore continues especially using system dynamics modeling approach. System dynamics modeling approach used because this method used to know and learn the system behavior. This paper represents of order fulfillment management analysis with case study at CV. Kurnia Jaya – Yogyakarta. The developed model has 4 sub models: customer order sub model, order fulfillment sub model, raw material management sub model and labor sub model. Next step is calibrating the developed model with boundary adequacy test, extreme conditions test and behavior reproduction test. After passing all these steps, the developed model to be ran with policy design (different scenario of order such as: constant order, step order, impulse order and actual order). Finally 3 alternative recommendations proposed for increasing the production rate so the order backlog and delivery delay decrease.
The Phenomenon of MSMEs Performance in Magelang City During the Pandemic COVID-19
Lionora, Clarisa Alfa;
Yacobo P. Sijabat;
Heni Hirawati;
Hartono, Budi;
Axel Giovanni
KINERJA Vol. 26 No. 2 (2022): KINERJA
Publisher : Faculty of Business and Economics Universitas Atma Jaya Yogyakarta
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
DOI: 10.24002/kinerja.v26i2.5692
Micro, Small, and Medium Enterprises (MSMEs) have a fundamental role in the regional economy as well as the national economy. This study aims to provide empirical evidence regarding the performance variability of MSMEs during the COVID-19 pandemic. The research population is all MSMEs in Magelang City. The research sample was 7,924 MSMEs obtained through purposive sampling. This study uses descriptive statistical analysis. The results and discussion show that the City of Magelang, from an economic perspective, has a fairly stable economic condition from 2015 to 2019. However, the COVID-19 pandemic in 2020 put the economy of Magelang City in a recession phase. Nevertheless, the competitiveness of Magelang City in 2020 has increased compared to 2019. The analysis of the variability of the performance of MSMEs shows that the South Magelang District has the lowest turnover of MSMEs. Central Magelang Subdistrict has the highest MSME turnover value. South Magelang Subdistrict has the highest average turnover of MSME compared to the average turnover of MSME in North Magelang and Central Magelang Districts.
Analisis Pengaruh Faktor Individu, Budaya Organisasi dan Insentif terhadap Kinerja Pegawai pada Sekretariat Daerah Kabupaten Aceh Tenggara
Syahputra, Jalaluddin Ibrahim;
Lubis, Yusniar;
Hartono, Budi
Journal of Education, Humaniora and Social Sciences (JEHSS) Vol 5, No 2 (2022): Journal of Education, Humaniora and Social Sciences (JEHSS), November
Publisher : Mahesa Research Center
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (1346.336 KB)
|
DOI: 10.34007/jehss.v5i2.1427
This study is the result of a quantitative study that aims to answer how individual factors, organizational culture, and incentives simultaneously and partially affect the performance of the employees of the Regional Secretariat of Southeast Aceh Regency. Research data were collected through initial observations and filling out a list of statements by respondents who were designated as samples in this study. Further analyzed by quantitative analysis. In the F test the results state that simultaneously there is a significant influence between Individual Factors (X1), Organizational Culture (X2), and Incentives (X3) on the Performance (Y) of the Regional Secretariat of Southeast Aceh Regency employees. The t-test shows that there is no significant impact of Individual Factors (X1) and Organizational Culture (X2) on Performance (Y). Meanwhile, there is a significant impact of Incentives (X3) on Performance (Y). So that the Incentive becomes the variable that has the most impact on performance. In line with the conclusions above, it is recommended to take a more performance-based approach through the application of fair rewards and sanctions (punishment) to the State Civil Apparatus at the Regional Secretariat of Southeast Aceh Regency.
Implementasi Kebijakan ASN sebagai Pelaksana Kebijakan Publik dalam Meningkatkan Kinerja Pegawai pada Kantor Badan Kepegawaian Daerah, Provinsi Sumatera Utara
Anggraini, Heny;
Zainuddin, Zainuddin;
Hartono, Budi
Journal of Education, Humaniora and Social Sciences (JEHSS) Vol 5, No 2 (2022): Journal of Education, Humaniora and Social Sciences (JEHSS), November
Publisher : Mahesa Research Center
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (680.83 KB)
|
DOI: 10.34007/jehss.v5i2.1393
The objectives of this research are as follows: Knowing and analyzing the implementation of ASN Policy Functions as Implementing Public Policy in Improving Employee Performance at the Regional Civil Service Agency Office of North Sumatra Province. Knowing and explaining the supporting and inhibiting factors in the Implementation of ASN Policies Functioning as Implementers of Public Policies in Improving Employee Performance at the Regional Personnel Agency Office of North Sumatra Province. This research is a qualitative design. Research approach based on phenomenology and constructivism paradigm in developing science Thus, qualitative research based on phenomenology and constructivism paradigm becomes the basis for researchers to interpret research findings so that they become a description of the research that occurs. The policy implementation model developed by Edward III is called Direct and Indirect Impact on Implementation. According to Edward III, there are four variables or factors that influence public policy, namely Communication, Resources, Disposition and Bureaucratic Structure. The four factors must run simultaneously because the four factors are interrelated.
Implementasi Surat Direktur Jenderal Imigrasi Nomor IMI.3-UM.01.01-1192 tahun 2020 Tentang Aplikasi Izin Tinggal Online (IT Online) di Masa Pandemi Covid-19 pada Kantor Imigrasi Kelas I Khusus Medan
Panjaitan, Maria Rivera Parasian;
Hartono, Budi;
Adam, Adam
Journal of Education, Humaniora and Social Sciences (JEHSS) Vol 5, No 3 (2023): Journal of Education, Humaniora and Social Sciences (JEHSS), February
Publisher : Mahesa Research Center
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (352.254 KB)
|
DOI: 10.34007/jehss.v5i3.1582
Penelitian ini bertujuan untuk mengkaji Impementasi Surat Direktur Jenderal Imigrasi Nomor IMI.3-UM.01.01-1192 Tahun 2020 Tentang Aplikasi Izin Tinggal Online (IT Online) di masa pandemi Covid-19 pada Kantor Imigrasi Kelas I Khusus Medan. Jenis penelitian ini adalah deskriptif dengan metode kualitatif. Teori Edwards III dijadikan sebagai pedoman analisis dan teori Miles, Huberman dan Saldana sebagai teknik analisis. Hasil penelitian menunjukkan implementasi IT Online di masa pandemi Covid-19 pada Kantor Imigrasi Kelas I Khusus Medan telah dilaksanakan namun masih belum optimal berdasarkan indikator-indikator teori Edwards III sebagai berikut: a) komunikasi perintah kebijakan telah ditransmisikan dengan jelas kepada pelaksana namun intensitasnya kurang konsisten dan sosialisasi ke masyarakat juga belum intensif; b) sejumlah sumber daya untuk implementasi IT online tersedia namun masih kurang maksimal; c) disposisi pelaksana mendukung implementasi IT Online; dan d) struktur birokrasi, IT Online belum memiliki SOP tersendiri dan fragmentasi tergolong minim. Faktor-faktor pendukung implementasi IT Online adalah SDM yang memadai serta fasilitas yang menunjang pelayanan izin tinggal sedangkan faktor penghambatnya ialah kondisi aplikasi belum handal, anggaran kurang maksimal untuk pengembangan lebih lanjut IT Online, sosialisasi kepada masyarakat belum intens, dan dukungan masyarakat masih rendah.
Analisis Pengaruh Sanksi Pajak, Pelayanan Fiskus,Pengetahuan Dan Kesadaranterhadap Kepatuhanwajib Pajak Di Samsat Medan Selatan
Siregar, Indria Sari;
Lubis, Yusniar;
Hartono, Budi
Journal of Education, Humaniora and Social Sciences (JEHSS) Vol 5, No 3 (2023): Journal of Education, Humaniora and Social Sciences (JEHSS), February
Publisher : Mahesa Research Center
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (968.942 KB)
|
DOI: 10.34007/jehss.v5i3.1640
This study aims to determine and analyze the effect of Tax Sanctions, Fiscal Services, Knowledge, and Awareness on Taxpayer Compliance in the South Medan Samsat. This type of research is quantitative research. The sample in this study was all Medan City Communities (taxpayers) and taxpayers who owned vehicles registered at the South Medan SAMSAT totaling 105 people. And the data analysis technique uses the SPSS (Statiskal Package for the Social Sciences) technique which is an application program that has the ability for quite high statistical analysis and a data management system in a graphical environment. The results in this study indicate that Tax Sanctions, Fiskus Services and Awareness have a positive and significant influence on Taxpayer Compliance at the South Medan SAMSAT. While on the other hand it is proven that knowledge has a positive but not significant effect on taxpayer compliance at the South Medan Samsat.
Implementasi Surat Edaran Otoritas Jasa Keuangan Nomor 6 Tahun 2017 tentang Penetapan Tarif Premi Asuransi Umum pada PT. Asuransi Jasa Indonesia Syariah Medan
Fitri, Khairizal;
Hartono, Budi;
Isnaini, Isnaini
Journal of Education, Humaniora and Social Sciences (JEHSS) Vol 5, No 2 (2022): Journal of Education, Humaniora and Social Sciences (JEHSS), November
Publisher : Mahesa Research Center
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (983.907 KB)
|
DOI: 10.34007/jehss.v5i2.1405
The purpose of this paper is to find out the implementation of SE OJK number 6 of 2017 concerning the Determination of General Insurance Premium Rates, which has been implemented and carried out by PT. Jasindo Syariah Medan. This research method uses a descriptive qualitative approach. Through observation research instruments, interviews and documentation studies. The data analysis using descriptive analysis. The results of the research are expected to show that the implementation of SE OJK number 6 of 2017 concerning the Determination of General Insurance Premium Rates at PT. Insurance Services Indonesia Syariah Medan. The researcher concludes that the implementation in terms of communication has been going well for several parties, especially the OJK and the public as insurance consumers. However, in terms of human resources (HR), the implementation is considered still not optimal, because there are still insurance agents who do not understand the contents of SE OJK number 6 of 2017. In terms of disposition, PT Asuransi Jasa Indonesia Syariah Medan is very supportive. good with OJK rules, while in terms of bureaucratic structure it has been running well according to OJK standards.
Autonomous Quadcopter Image Processing for Simulated Search and Rescue Flights
Hartono, Budi;
Zuhri, Muhammad Rizki;
Rosalia, Citra Asti;
Fauzan, Nofrijal
METAL: Jurnal Sistem Mekanik dan Termal Vol. 7 No. 2 (2023): Jurnal Sistem Mekanik dan Termal (METAL)
Publisher : Department of Mechanical Engineering, Universitas Andalas
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
DOI: 10.25077/metal.7.2.8-17.2023
In Search and Rescue (SAR) operations, a designated search area is explored with aircraft and helicopters. After target identification, the flying vehicle continues landing and rescue procedures. This research uses a quadcopter to replicate a SAR flight simulation. Autonomous quadcopter operation includes takeoff and navigation between waypoints determined by Mission Planner software. On the way to the second waypoint, a camera-based image processing system scans the ground surface. If the marker is detected by the image processing system, the Raspberry Pi program will instruct control commands to the Pixhawk flight controller to ensure the quadcopter lands directly on the recognized marker. In the case when the quadcopter reaches the second waypoint but the system fails to identify the marker, the Mission Planner commands the quadcopter to autonomously return to the starting point and land automatically at the take-off location. An interesting aspect of this research concerns the application of a low-cost image processing system to ensure the quadcopter flies at a constant flight altitude above the ground surface, so that the quadcopter can perform simulated SAR flight missions and accurately identify landmarks. Research parameters include marker diameter, flight altitude, and quadcopter speed. The results show successful marker detection at a flying altitude of up to 3 meters above the ground and reaching a top speed of 3 m/s at a flying altitude of 2 meters.
PERANCANGAN GRIPPER PADA LENGAN ROBOT PEMINDAH BAHAN TIPE CARTESIAN COORDINATE
Atmaja, Muhammad Iqbal;
Hartono, Budi;
Waluyo, Roy
ALMIKANIKA Vol 1 No 1 (2019): Januari
Publisher : UNIVERSITAS IBN KHALDUN BOGOR
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
DOI: 10.32832/almikanika.v1i1.2007
Based on Survey result from International Federation of Robotics (IFR) published a study of robots in the world. In this analysis, the institution summarized the results of the Growth of Industrial Robots around the world in the period 2003 - 2004, on average each year it increased by around 6% to 1,000,000 robots used to assist industrial processes. Gripper Arm Robot uses a robotic manipulator as an end effector. Previously there were people who made but different types. Arm Robot Gripper 5 DOF (Degree Of Freedom) has a main part, namely frame construction using Aluminum 1060, the drive system with MG 995 Servo with 10 Kgcm of torque needed to grip objects with a mass variation of 1000 grams, 600 grams and 300 grams on Gripper Arm Robot 5 DOF gets torque of 6.96 kgcm, 3.5 kgcm and 2 kgcm. Arm DO 5 Robot Gripper has style analysis, from force analysis can be found the stress on the rod is 0.546 ???????????? in the normal force of 8.19 N. From all the construction and driving systems there is a Robot Arm DOF 5 Grip can be concluded safe to use until the maximum load amounting to 1000 grams.
PROSES PEMBUAATAN SUSPENSI SADEL SEPEDA MMENGGUNAKAN MATERIAL PEGAS DAUN AISI 4140
Hermawan, Egi;
Hartono, Budi;
Yuliaji, Dwi
ALMIKANIKA Vol 2 No 1 (2020): Januari
Publisher : UNIVERSITAS IBN KHALDUN BOGOR
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
DOI: 10.32832/almikanika.v2i1.2057
Penelitian ini mempelajari karakteristik suspensi sadel sepeda jalan baja karbon rendah. Analisis sifat tekuk baja, nilai kekerasan, dan struktur mikro dengan menghadirkan proses annealing pada suhu 800oC. Berdasarkan hasil penelitian, pegas daun tanpa proses annealing diagonal 50 mm mengalami patah ketika pegas bengkok, pada gaya 546,28 kgf. Pada saat pegas daun tanpa proses annealing pegas daun rentan terhadap fraktur karena terdapat fase ferit dan fase perlite di mana pada sifat ini lebih banyak ferit terbentuk, bahan semakin lunak dan liat. Pengujian pegas daun yang telah dipasang di sadel sepeda jalan dengan diameter lekukan 50 mm dan diberi beban 75 kg mengalami defleksi dan menyebabkan tidak kembali ke posisi awal dibandingkan dengan pegas daun diameter lekukan 70 mm dan diberi beban 75 kg di mana diameter lekukan adalah 70 mm ketika diberi beban pegas dari lekukan 70 mm kembali ke posisi awal ketika pegas diberi beban.