Articles
KELAYAKAN TEHNIK BUDIDAYA PADI SAWAH MENGGUNAKAN âTEKNOLOGI TAIWANâ DALAM UPAYA PENINGKATAN PRODUKSI.
Supriadi, Herman
Indonesian Journal of Socio Economics Juni, Jurnal Sosio Ekonomika
Publisher : Lampung University
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
 Study on development of âTaiwan Technologyâ in order to increase rice production have been conducted at Riau province during May 2007. The aim of the study was to know the specification, the farmers response, the potential for the increase in the productivity, the regional governments response, the supporting infrastructure and the technical, social-economical feasibility of âTaiwan technologyâ, that lately will be developed widely by the regional government in Riau. The study was carried out in the regency of Rokan Hilir and Kampar that developed this technology.Results of the study showed that the application of this technology could increase the productivity of rice up to 1.6 ton unhusked rice/hectare and increase  the income around Rp 1.573 million/ season/hectare. The efficiency of both cultural practices (existing and Taiwan technology) almost the same ( B/C ratio around 1) and marginal benefit cost ratio (MBCR = 2,0) showed that adoption of Taiwan technology was profitable. Unfortunatelly not all of the farmer gave a good response to apply this introduce technology, the reason because the technoloty  needed high input , the pesticide suggestion was also intensive, that it was worried about will cause the impact negaif towards the environment. The reality, not all of the farmers wanted to adopt new technology, and the adopter farmer not fully adopted technology introduced. The technological component that often was adopted widely by the farmer and was continuous was technical the submersion of the seed with salt to select the vigor seed. With the treatment of the submersion to throw the empty or not better seed away, could increase the viability of the seed almost 100%.Hope fully the local government have a good policy to adopt all of good things of this technology and not brought the bad impact for the environment.
KELAYAKAN TEHNIK BUDIDAYA PADI SAWAH MENGGUNAKAN âTEKNOLOGI TAIWANâ DALAM UPAYA PENINGKATAN PRODUKSI.
Supriadi, Herman
Indonesian Journal of Socio Economics Juni, Jurnal Sosio Ekonomika
Publisher : Lampung University
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
 Study on development of âTaiwan Technologyâ in order to increase rice production have been conducted at Riau province during May 2007. The aim of the study was to know the specification, the farmers response, the potential for the increase in the productivity, the regional governments response, the supporting infrastructure and the technical, social-economical feasibility of âTaiwan technologyâ, that lately will be developed widely by the regional government in Riau. The study was carried out in the regency of Rokan Hilir and Kampar that developed this technology.Results of the study showed that the application of this technology could increase the productivity of rice up to 1.6 ton unhusked rice/hectare and increase  the income around Rp 1.573 million/ season/hectare. The efficiency of both cultural practices (existing and Taiwan technology) almost the same ( B/C ratio around 1) and marginal benefit cost ratio (MBCR = 2,0) showed that adoption of Taiwan technology was profitable. Unfortunatelly not all of the farmer gave a good response to apply this introduce technology, the reason because the technoloty  needed high input , the pesticide suggestion was also intensive, that it was worried about will cause the impact negaif towards the environment. The reality, not all of the farmers wanted to adopt new technology, and the adopter farmer not fully adopted technology introduced. The technological component that often was adopted widely by the farmer and was continuous was technical the submersion of the seed with salt to select the vigor seed. With the treatment of the submersion to throw the empty or not better seed away, could increase the viability of the seed almost 100%.Hope fully the local government have a good policy to adopt all of good things of this technology and not brought the bad impact for the environment.
Pemodelan Aplikasi Enterprise Resource Planning Untuk Pondok Pesantren (Pemodelan Aplikasi Proses Akademik)
Yaqin, M. Ainul;
-, Syahiduzzaman
MATICS Vol 8, No 1 (2016): MATICS
Publisher : Department of Informatics Engineering
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (865.822 KB)
|
DOI: 10.18860/mat.v8i1.3479
Abstract— Pesantren is an institution or organization that is engaged in Islamic religious education-based community education diniyah or integrated with other types of education. As a boarding school organization requires good management information systems by implementing an integrated boarding school. The information system is an Enterprise Resource Planning (ERP) system that covers all business processes in a boarding school and focused on planning and documentation of transactions. ERP is the application used by the manufacturing company in operation. There is therefore a fundamental conceptual differences between the manufacturing process with the process of education at boarding school, so as to generate the appropriate ERP and can be used by the boarding school, the system needs to be modeled. Modelling done by creating a process diagram and diagram data.
PENGEMBANGAN SISTEM INFORMASI ALUMNI BERBASIS WEB FAKULTAS SAINS DAN TEKNOLOGI UNIVERSITAS ISLAM NEGERI MAULANA MALIK IBRAHIM MALANG
Yaqin, M. Ainul;
Syauqi, A’la;
Rohma, Faiz Afiani;
Kirana, Annisa Puspa
MATICS MATICS (Vol. 4 No. 1
Publisher : Department of Informatics Engineering
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (384.356 KB)
|
DOI: 10.18860/mat.v0i0.1557
Salah satu tolok ukur keberhasilan pendidikan di perguruan tinggi adalah jumlah dan kualitas lulusan yang dihasilkan. Hal ini dinyatakan dalam salah satu standar akreditasi yang manyatakan jumlah lulusan, evaluasi kinerja lulusan, studi pelacakan lulusan, waktu tunggu rata-rata untuk memperoleh pekerjaan pertama, dan prosentase lulusan yang bekerja di bidang yang sesuai dengan keahliannya.Fakultas Sains dan Teknologi UIN Maliki Malang saat ini sudah berusia lebih dari 5 tahun, dan sudah menghasilkan banyak lulusan. Dari sekian banyak jumlah lulusan tersebut banyak yang sudah terserap oleh lapangan kerja yang disediakan oleh berbagai pihak. Sayangnya informasi tersebut tidak didukung oleh data-data yang detil dan terdokumentasi, sehingga ketika pihak Fakultas Sains dan Teknologi UIN Maliki Malang membutuhkan informasi tersebut untuk suatu keperluan merasa kesulitan.Untuk mengatasi masalah-masalah tersebut, maka perlu dikembangkan sistem informasi alumni jurusan teknik informatika. Sistem informasi tersebut akan dikembangkan dengan program berbasis web. Sehingga software yang digunakan untuk pengembangan sistem informasi ini adalah PHP, My SQL, dreamweaver, dan beberapa software lainnya.
APLIKASI FUZZY INFERENCE SYSTEM (FIS) METODE SUGENO DALAM MENENTUKAN KEBUTUHAN ENERGI DAN PROTEIN PADA BALITA
Wachdani, Rosida;
Abidin, Zainal;
Yaqin, M. Ainul
MATICS MATICS (Vol. 4 No. 2
Publisher : Department of Informatics Engineering
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (415.795 KB)
|
DOI: 10.18860/mat.v0i0.1565
Masa balita merupakan periode perkembangan yang rentan terhadap masalah gizi. Energi dan protein yang tidak seimbang dalam menu makanan balita dapat menyebabkan malnutrisi (gizi salah). Oleh karena itu, pemenuhan energi dan protein merupakan faktor yang perlu diperhatikan dalam menjaga kesehatan balita yang sedang mengalami masa pertumbuhan dan perkembangan. Pada penelitian ini, dibangun perangkat lunak yang dapat memudahkan seseorang dalam menentukan kebutuhan energi dan protein untuk balita usia 36-59 bulan. Metode yang digunakan dalam pengembangan perangkat lunak adalah fuzzy sugeno, yaitu aturan yang direpresentasikan dalam bentuk IF-THEN dengan output berupa konstanta untuk melakukan perhitungan terhadap kebutuhan energi dan protein. Sedangkan input yang digunakan dalam metode fuzzy sugeno meliputi berat badan, tinggi badan, umur dan jenis kelamin. Pengujian terhadap fuzzy sugeno tersebut menunjukkan bahwa nilai yang dihasilkan metode ini memiliki analisis kebenaran dengan standard ideal sebesar 58% dalam menentukan kebutuhan energi dan 86% dalam menentukan kebutuhan protein. Sedangkan metode manual memiliki analisis kebenaran dengan standard ideal sebesar 24% dalam menentukan kebutuhan energi dan 34% dalam menentukan kebutuhan protein.  Kata kunci : balita, gizi, kebutuhan energi, kebutuhan protein, fuzzy sugeno.
PENGATUR POLA MENU MAKANAN BALITA UNTUK MENCAPAI STATUS GIZI SEIMBANG MENGGUNAKAN SISTEM INFERENSI FUZZY METODE SUGENO
Wachdani, Rosida;
Abidin, Zainal;
Yaqin, M. Ainul
MATICS MATICS (Vol. 4, No 5
Publisher : Department of Informatics Engineering
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (125.911 KB)
|
DOI: 10.18860/mat.v0i0.2007
Pemenuhan pola menu makanan merupakan faktor yang perlu diperhatikan dalam menjaga kesehatan balita yang sedang mengalami masa pertumbuhan dan perkembangan. Dalam menyusun pola menu makanan, seseorang perlu memperhatikan menu seimbang dan variasi hidangan. Menu yang dihidangkan meliputi keanekaragaman bahan makanan dalam jumlah dan proporsi yang sesuai, sehingga memenuhi kebutuhan gizi balita guna pemeliharaan sel-sel tubuh dan proses pertumbuhan. Pada penelitian ini, dibangun perangkat lunak yang dapat memudahkan seseorang dalam menentukan kebutuhan energi, karbohidrat, lemak dan protein untuk balita usia 36-59 bulan. Metode yang digunakan dalam pengembangan perangkat lunak adalah fuzzy sugeno, yaitu aturan yang direpresentasikan dalam bentuk IF-THEN dengan output berupa konstanta untuk melakukan perhitungan terhadap kebutuhan energi dan protein. Pengujian terhadap fuzzy sugeno menunjukkan bahwa nilai yang dihasilkan metode ini memiliki analisis kebenaran yang mendekati kebutuhan standar ideal apabila dibandingkan dengan hasil metode manual. Oleh karena itu, kebutuhan energi, karbohidrat, lemak dan protein yang dihasilkan metode fuzzy sugeno dapat diterapkan dalam menentukan pola menu makanan.Kata kunci : balita, gizi, analisis bahan makanan, fuzzy sugeno
Comparison of the Reduction Effect of Sucrose and Table Sugar Concentration on Growth Characteristics of Red Ginger (Zingiber officinale Rocs.) Cultured in Liquid Medium
Hapsari, Betalini Widhi;
Ermayanti, Tri Muji;
Rantau, Deritha E.;
Rudiyanto, Rudiyanto
ANNALES BOGORIENSES Vol 15, No 1 (2011): Annales Bogorienses
Publisher : Research Center for Biotechnology - Indonesian Institute of Sciences (LIPI)
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
DOI: 10.1234/34
The aim of this research was to compare the reduction effect of sucrose or table sugar concentration on growth characteristics of red ginger cultured in MS liquid medium. Shoots of red ginger was cultured on MS liquid medium without addition of plant growth regulators, supplemented with 5, 10, and 20 g/l of sucrose or table sugar for 8 weeks. Resulted plantlets were acclimatized in a greenhouse to investigate their growth and survival rate. Numbers of stomata, chlorophyll concentration as well as cross section of leaves from plantlets grown in vitro were compared to those of transplants grown in the greenhouse. The results showed that the use of table sugar at concentration of 20 g/l gave the best growth of red ginger. Meanwhile, the reduction of table sugar from 20 to 10 g/l reduced growth and survival rate of in vitro shoots as well as that of transplants in the greenhouse. Only few shoots formed roots when they were grown on the medium containing 5 g/l of table sugar, and transplants failed to grow in the greenhouse. It found that the chlorophyll content of in vitro plantlets was lower than those of transplants grown in the glasshouse. However, the number of stomata of the in vitro plantlets was higher than that of transplants grown in the glasshouse. There was no anatomical abnormalities found on the cross section of leaves between in vitro plantlets and transplants grown in the greenhouse. The replacement of sucrose with table sugar may reduce the production cost of plantlets.Keywords: red ginger (Zingiber officinale Rocs.), reduction of sugar, survival rate, chlorophyll, stomata.
ANALISIS STABILITAS DINDING PENAHAN DI RUAS JALAN NGANTANG KABUPATEN MALANG
Syaifullah, Syaifullah;
Suhudi, Suhudi;
Rasidi, Nawir
eUREKA : Jurnal Penelitian Mahasiswa Teknik Sipil dan Teknik Kimia Vol 1, No 2 (2017)
Publisher : Universitas Tribhuwana Tunggadewi Malang
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
Soil as construction material as well as the foundation of a construction land or structures such as dams, embankments, retaining walls, buildings and bridges. In every construction requires a specific requirement in terms of both strength and economically. This study aimed to analyze and plan for a stable retaining wall on the stability of the shift, the overthrow and the carrying capacity by using Gravity Type On Roads Ngantang Locations in Malang. Calculation of earth pressure calculated using Rankine theory.
Stability Analysis Results Retaining Walls with Gravity Type Dimensions: Width top (B1) 0.50 m, base width (B2) of 2.00 m and a total height (H + D) 14.00 m, which then did not secure the stability of the overthrow ( 0.4 1.5).
Results Budget Plan (RAB) in the calculation of total fees earned USD 839 855 542, the cost of any work (m3) Rp 1,566,164.181, job retention costs (m) USD 27,995,184.73.
Keywords: Analysis, Dimensional, Gravity Type Retaining Walls
Perbedaan kekuatan impak mahkota pasak prefabricated logam dengan mahkota pasak prefabricated non logamThe difference of impact strength between prefabricated metal post crown and prefabricated non-metal post crown
Ariyanti, Annisa Tri;
Cevanti, Twi Agnita;
Razak, Arifzan
Jurnal Kedokteran Gigi Universitas Padjadjaran Vol 30, No 1 (2018): April
Publisher : Fakultas Kedokteran Gigi Universitas Padjadjaran
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (464.38 KB)
|
DOI: 10.24198/jkg.v30i1.18183
Pendahuluan: Gigi yang direstorasi dengan menggunakan mahkota pasak menunjukkan ketahanan fraktur akar yang lebih rendah dibandingkan dengan gigi yang masih vital. Gigi yang masih vital memiliki ketahanan yang paling tinggi diikuti pasak prefabricated resin fiber dan pasak prefabricated stainless steel. Bahan pasak logam memiliki sifat mekanik seperti modulus elastisitasnya yang tinggi daripada bahan pasak non logam yang dapat mempengaruhi kekuatan impak bahan pasak. Kekuatan impak atau kekuatan benturan didefinisikan sebagai energi yang diperlukan untuk mematahkan suatu bahan dengan gaya benturan. Penelitian ini bertujuan untuk mengetahui perbedaan kekuatan impak antara mahkota pasak prefabricated bahan titanium. Metode: Sebanyak 6 sampel gigi premolar dengan mahkota pasak prefabricated bahan resin fiber dengan rahang atas yang telah diobturasi dan dibagi kedalam 2 kelompok: kelompok I adalah kelompok yang akan diberikan pasak prefabricated bahan resin fiber (n=3), kelompok II dengan pasak prefabricated bahan titanium(n=3), kemudian ditumpat dengan bahan core build-up dari komposit. Semua kelompok ditanam di balok besi yang berbentuk persegi panjang. Selanjutnya dilakukan uji impak menggunakan mini impact tester type KRY sampai sampel patah. Hasil: Rerata kelompok pasak prefabricated bahan resin fiber adalah 1,9267 ± 0,99203 J/mm2 sedangkan kelompok pasak prefabricated bahan titanium adalah 5,7567 ± 0,41477 J/mm2. Independent sample t test menunjukkan ada perbedaan pada semua kelompok. Simpulan: kekuatan impak antara mahkota prefabricated bahan resin fiber lebih rendah daripada kekuatan impak mahkota pasak prefabricated bahan titanium. ABSTRACTIntroduction: Teeth restored prefabricated post crown show lower resistance to root fracture compared to with vital teeth. Vital teeth are having the highest resistance followed by prefabricated fibre resin postand prefabricated stainless steel post. The metal post higher has mechanical properties such as its high elastic modulus rather than a nonmetallic post which affect the impact strength of the material. The impact strength is defined as the energy required to break material with impact force. This study was aimed to determine the difference between the impact strength of prefabricated resin fibre post crown and prefabricated titanium fibre post crown Methods: Six obturated mandibular premolars with prefabricated fibre resin post were divided into two groups: group I was given a prefabricated fibre resin post (n = 3); group II was given a prefabricated titanium post (n = 3). They were all then filled with build-up core composite material. All groups were planted in an iron rectangular block. Furthermore, the impact test was performed using a mini impact tester (KRY type) until all samples broken. Results: The average impact strength of the post crown with prefabricated resin fiber material was 1.9267 ± 0.99203 J/mm2, while prefabricated titanium was 5.7567 ± 0.41477 J/mm2. Independent sample t test shows there were differences in all groups. Conclusion: The impact strength of prefabricated resin fibre post crown was lower than the impact strength of the prefabricated titanium post crown.Keywords: Impact strength, prefabricated post resin fiber, prefabricated post titanium.
Audit Sistem Informasi dengan Menggunakan Cobit 4.1 untuk Evaluasi Manajemen Teknologi Informasi
Mulyanto, Agus
Prosiding Seminar Nasional Darmajaya Vol 1 (2018): SEMNAS IIB DARMAJAYA
Publisher : Prosiding Seminar Nasional Darmajaya
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (151.153 KB)
Kemajuan disetiap bidang tak lepas dari teknologi sebagai penunjangnya, terutama teknologi informasi. Akan tetapi hal tersebut harus dimbangi dengan adanya sebuah evaluasi atau audit terhadap penggunaan Teknologi informasi itu sendiri sehingga ancaman atau kerugian dapat diminimalkan ataupun dicegah. Pada Penelitian ini penulis berupaya menemukan dan mengetahui apakah tata kelola Teknologi informasi sudah di terapkan dengan baik dan efektif sesuai dengan visi dan misi perusahaan. Karena hal ini sangat penting mengingat besarnya biaya yang harus di keluarkan oleh perusahaan dalam menerapkan teknologi informasi khususnya pada PT.Yamaha Manufacturing agar biaya yang dikeluarkan tidaklah sia-sia dan memberikan manfaat sesuai target yang diinginkan oleh perusahaan dalam rangka mewujudkan visi dan misi. Penelitian ini bertujuan mengetahui sejauh mana kinerja sistem informasi administrasi logistik dan juga memberikan rekomendasi tata kelola perbaikan setelah mengetahui kesenjangan antara tata kelola saat ini dengan tata kelola yang diharapkan atau standard-standard yang diharapkan perusahaan pada proses bisnisnya sesuai dengan framework yang digunakan. Framework yang digunakan dalam penelitian ini adalah COBIT versi 4.1 khusus pada domain Deliver and Support (DS). Teknik pengumpulan datanya dilakukan dengan observasi, kuesioner dan wawancara dengan narasumber yang telah ditentukan sesuai dengan domain dan Control Objective yang digunakan. Metode yang di gunakan penulis dalam menganalisa data menggunakan 4 tahapan, yaitu menentukan level domain, menentukan proses kendali, menentukan indikator dan pemetaan tingkat kematangannya. Sehingga hasil dari penelitian ini nantinya dapat diketahui tingkat kematangan (maturity level) pada proses bisnis yang berjalan di PT.Yamaha Manufacturing khusus pada Domain DS, yaitu berada pada level 4 yang berarti sudah terukur dan terintegrasi antar proses yang berlangsung dan memberikan rekomendasi kepada perusahaan agar penerapan Teknologi Informasi dapat lebih baik, efektif dan efisien.Kata kunci: Audit Sistem Informasi, Administrasi Logistic, COBIT